All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 4 Length mm: 50 Thread Length mm: 45 Size mm: 4.0 x 50 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 7.87 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 8 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 2 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 8 x 2
All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 5 Length mm: 50 Thread Length mm: 45 Size mm: 5.0 x 50 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 9.74 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 10 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 2 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 10 x 2
All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Double countersunk reduces the likelihood of head shear and assists completion of countersinking. 40° deep single thread to provide a secure fixing with high pull-out resistance. Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 5 Length mm: 80 Thread Length mm: 70 Size mm: 5.0 x 80 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 9.74 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal, Corrosive Wood (e.g. Oak, Cedar) Gauge: 10 Salt Spray Resistance BS EN 9227 Hrs: 1,008 + Corrosion Rating: 4 - Urban; industrial areas with a moderate salt atmosphere Length inch: 3 Driver Bit Size: PZ2 Thread Type: Single Coarse 40° Point Type: 25° Sharp with Single Slash Size imp.: 10 x 3
Used to secure plasterboard to timber stud work. The collated strips are specifically designed to be compatible with all leading power tool brands. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 38 Thread Length mm: 33 Size mm: 3.5 x 38 Pack Quantity Unit: Pieces Recess Type: Phillips Substrates: Softwood, Drywall Salt Spray Resistance BS EN 9227 Hrs: 48 Corrosion Rating: 1 - Clean, dry; low humidity environments Screws Per Strip: 50 Length inch: 1 Driver Bit Size: PH2 Thread Type: Coarse Point Type: 25° Sharp
Used to secure plasterboard to timber stud work. The collated strips are specifically designed to be compatible with all leading power tool brands. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 45 Thread Length mm: 40 Size mm: 3.5 x 45 Pack Quantity Unit: Pieces Recess Type: Phillips Substrates: Softwood, Drywall Salt Spray Resistance BS EN 9227 Hrs: 48 Corrosion Rating: 1 - Clean, dry; low humidity environments Screws Per Strip: 50 Length inch: 1 Driver Bit Size: PH2 Thread Type: Coarse Point Type: 25° Sharp
Used to secure plasterboard to timber stud work. The collated strips are specifically designed to be compatible with all leading power tool brands. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 55 Thread Length mm: 50 Size mm: 3.5 x 55 Pack Quantity Unit: Pieces Recess Type: Phillips Substrates: Softwood, Drywall Salt Spray Resistance BS EN 9227 Hrs: 48 Corrosion Rating: 1 - Clean, dry; low humidity environments Screws Per Strip: 50 Length inch: 2 Driver Bit Size: PH2 Thread Type: Coarse Point Type: 25° Sharp
Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 25 Thread Length mm: 20 Size mm: 3.5 x 25 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp
Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 32 Thread Length mm: 27 Size mm: 3.5 x 32 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Included Items: PH2 S2 Bit (Qty 1) Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp
Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 32 Thread Length mm: 27 Size mm: 3.5 x 32 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp
Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 38 Thread Length mm: 33 Size mm: 3.5 x 38 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Included Items: PH2 S2 Bit (Qty 1) Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp
Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 38 Thread Length mm: 33 Size mm: 3.5 x 38 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp
Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 42 Thread Length mm: 37 Size mm: 3.5 x 42 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp
Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 45 Thread Length mm: 40 Size mm: 3.5 x 45 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Included Items: PH2 S2 Bit (Qty 1) Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp
Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 45 Thread Length mm: 40 Size mm: 3.5 x 45 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Length inch: 1 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp
Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 50 Thread Length mm: 45 Size mm: 3.5 x 50 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Included Items: PH2 S2 Bit (Qty 1) Length inch: 2 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp
Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 50 Thread Length mm: 45 Size mm: 3.5 x 50 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Length inch: 2 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp
Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness. NOTE: Partially threaded. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 60 Thread Length mm: 50 Size mm: 3.5 x 60 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Length inch: 2 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp
Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. NOTE: Partially threaded. Phillips No.2 recess for a positive drive. Bugle head to reduce likelihood of damaging the board surface. 25° super sharp point for ease of penetration. 60° twin-thread offers excellent pull-out values and insertion speed. TECHNICAL DATA: Thread Dia. mm: 4.8 Length mm: 100 Thread Length mm: 63 Size mm: 4.8 x 100 Pack Quantity Unit: Pieces Recess Type: Phillips Max Drilling Thickness mm: 0.6 Substrates: Thin Sheet Metal, Drywall Corrosion Rating: 1 - Clean, dry; low humidity environments Included Items: PH2 S2 Bit (Qty 1) Length inch: 4 Driver Bit Size: PH2 Thread Type: Fine Point Type: 25° Sharp