Diameter - 5.0mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.
Diameter - 5.0mm Thread form - Full Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.
Diameter - 5.0mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.
Diameter - 4.0mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.
Diameter - 4.5mm Thread form - Full Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.
Diameter - 4.5mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.
Diameter - 4.5mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.
Diameter - 4.5mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.
Diameter - 6.0mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.
Diameter - 6.0mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.
Diameter - 5.0mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.
Reisser Cutter Full Thread Screws Tub 5.0 x 80mm - 400pc Diameter - 5.0mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.
A rapid light duty plasterboard fixing for use in a wide range of applications. Cross recess head, allows simple installation with a pozi or cross drive screwdriver. Comes complete with screws. 3 point tip for quick insertion. Come with zinc plated pan headed cross recess 4.5 x 30mm screws.
**Sold Individually** A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings. Designed to replace traditional masonry fixings. TX30 TX Drive recess to reduce driver wear & prevent camming-out. Serrated V-threads to achieve optimum insertion into all masonry types. Zinc plated and yellow passivated for increased corrosion resistance . High-Low thread on first 30mm to aid insertion and reduce torque. Ideal for fitting windows and door frames. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 6 Driver Bit Size: TX30 Fixture Hole Diameter mm: 8 Included Items: TX30 S2 Bit (Qty 1) Max Fixture Thickness mm: 50 Min Embedment Depth mm: 50 Point Type: Sharp Recess Type: TX Drive Salt Spray Resistance BS EN 9227 Hrs: 192 Size Dia. x L mm: 7.5 x 100 Substrates: Wood, Concrete, Brick, Block, Stone Thread Dia. mm: 7.5 Thread Type: High-Low Start with V Flutes
**Sold Individually** A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings. Designed to replace traditional masonry fixings. TX30 TX Drive recess to reduce driver wear & prevent camming-out. Serrated V-threads to achieve optimum insertion into all masonry types. Zinc plated and yellow passivated for increased corrosion resistance . High-Low thread on first 30mm to aid insertion and reduce torque. Ideal for fitting windows and door frames. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 6 Driver Bit Size: TX30 Fixture Hole Diameter mm: 8 Included Items: TX30 S2 Bit (Qty 1) Max Fixture Thickness mm: 60 Min Embedment Depth mm: 50 Point Type: Sharp Recess Type: TX Drive Salt Spray Resistance BS EN 9227 Hrs: 192 Size Dia. x L mm: 7.5 x 110 Substrates: Wood, Concrete, Brick, Block, Stone Thread Dia. mm: 7.5 Thread Type: High-Low Start with V Flutes
**Sold Individually** A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings. Designed to replace traditional masonry fixings. TX30 TX Drive recess to reduce driver wear & prevent camming-out. Serrated V-threads to achieve optimum insertion into all masonry types. Zinc plated and yellow passivated for increased corrosion resistance . High-Low thread on first 30mm to aid insertion and reduce torque. Ideal for fitting windows and door frames. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 6 Driver Bit Size: TX30 Fixture Hole Diameter mm: 8 Included Items: TX30 S2 Bit (Qty 1) Max Fixture Thickness mm: 80 Min Embedment Depth mm: 50 Point Type: Sharp Recess Type: TX Drive Salt Spray Resistance BS EN 9227 Hrs: 192 Size Dia. x L mm: 7.5 x 130 Substrates: Wood, Concrete, Brick, Block, Stone Thread Dia. mm: 7.5 Thread Type: High-Low Start with V Flutes
**Sold Individually** A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings. Designed to replace traditional masonry fixings. TX30 TX Drive recess to reduce driver wear & prevent camming-out. Serrated V-threads to achieve optimum insertion into all masonry types. Zinc plated and yellow passivated for increased corrosion resistance . High-Low thread on first 30mm to aid insertion and reduce torque. Ideal for fitting windows and door frames. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 6 Driver Bit Size: TX30 Fixture Hole Diameter mm: 8 Included Items: TX30 S2 Bit (Qty 1) Max Fixture Thickness mm: 100 Min Embedment Depth mm: 50 Point Type: Sharp Recess Type: TX Drive Salt Spray Resistance BS EN 9227 Hrs: 192 Size Dia. x L mm: 7.5 x 150 Substrates: Wood, Concrete, Brick, Block, Stone Thread Dia. mm: 7.5 Thread Type: High-Low Start with V Flutes