John Guest

Connects a supply to a tap or other fixture or appliance JG Speedfit x union nut flexi hose (braided) for the connection of pipe to a male thread appliance, such as a tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit x union nut flexi hose is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Features and benefits • An alternative to hard piping to a tap or fixture • Flexible design makes installation hassle free • Safe flame-free installation, with no hot works, glue or flux • Braided stainless steel outer layer protects the internal feed from damage • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water only (6 Bar @ 65 °C)

Connects a supply to a tap or other fixture or appliance JG Speedfit x Speedfit flexi hose (braided) for the connection of plastic or copper pipe. The flexi hose is ideal for the connection of two pipes where the angle is too steep to bend the pipe to make a connection. Simply push the push-fit fitting fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit x Speedfit flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Features and benefits • An alternative to hard piping to a tap or fixture • Flexible design makes installation hassle free • Safe flame-free installation, with no hot works, glue or flux • Braided stainless steel outer layer protects the internal feed from damage • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water only (6 Bar @ 65 °C)

Connects a supply to a tap or other fixture or appliance JG Speedfit x union nut flexi hose (braided) for the connection of pipe to a male thread appliance, such as a tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit x union nut flexi hose is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Features and benefits • An alternative to hard piping to a tap or fixture • Flexible design makes installation hassle free • Safe flame-free installation, with no hot works, glue or flux • Braided stainless steel outer layer protects the internal feed from damage • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water only (6 Bar @ 65 °C)

Quickly and securely connects two unequal sized Speedfit fittings to reduce a line size JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal™ collet with stainless steel teeth and main O-Ring seal Twist & Lock® cap secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

JG Speedfit reducing straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit reducing straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits • Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems

JG Speedfit reducing straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit reducing straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits • Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems