John Guest

Quickly and securely connects three pipes of equal size JG Speedfit equal tee push-fit fitting for the connection of three equal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits • Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems

Plastic service valve allows isolation of a fixture or appliance for emergency or maintenance work JG Speedfit service valve for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits • Instant push-fit service valve with 1/4 turn isolation screwdriver slot • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water (not suitable for central heating)

Easily connects two Speedfit fittings of equal size to create a swivel type 90° connection JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits • Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems

JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits • Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems

Creates a rigid connection and enhanced dual action seal when fitting a Speedfit pipe to a Speedfit fitting Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal. Features and benefits • 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only) • Maintains structural integrity of the pipe connection • Helps make the pipe more rigid when a side load is applied • Suitable for hot and cold water and central heating systems • Suitable for Speedfit pipes and fittings only

Directly connects a tank to a mains supply simply and securely JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a maximum wall thickness of 4mm. Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK. Features and benefits • Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for cold water use only