Fixings & Mastic

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 140
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 10
Edge Distance mm: 70
Fixture Hole Diameter mm: 12
Max Fixture Thickness mm: 55
Min Drill Hole Depth mm: 50
Nut Size mm: M10
Nut Socket Size mm: 17
Nut Type: Hex Full
Size Thread Dia. x L mm: M10 x 120
Substrates: Concrete
Thread Dia. mm: M10
Thread Type: Metric
Washer Size mm: M10 x 21
Washer Type: Form A

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 150
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 12
Edge Distance mm: 75
Fixture Hole Diameter mm: 14
Max Fixture Thickness mm: 25
Min Drill Hole Depth mm: 60
Nut Size mm: M12
Nut Socket Size mm: 19
Nut Type: Hex Full
Size Thread Dia. x L mm: M12 x 100
Substrates: Concrete
Thread Dia. mm: M12
Thread Type: Metric
Washer Size mm: M12 x 24
Washer Type: Form A

**Sold Individually**

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 150
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 12
Edge Distance mm: 75
Fixture Hole Diameter mm: 14
Included Items: M12 Hex Full Nuts & Form A Washers
Max Fixture Thickness mm: 45
Min Drill Hole Depth mm: 60
Nut Size mm: M12
Nut Socket Size mm: 19
Nut Type: Hex Full
Size Thread Dia. x L mm: M12 x 120
Substrates: Concrete
Thread Dia. mm: M12
Thread Type: Metric
Washer Size mm: M12 x 24
Washer Type: Form A

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.
Chamfered head design to prevent damage to thread during installation.
Zinc plated and passivated (3-5 microns).
Manufactured from cold formed carbon steel (grade 5.8).
Special expansion clip for rapid installation.

TECHNICAL DATA:
Centre Spacing mm: 110
Corrosion Rating: 1 - Clean, dry; low humidity environments
DIN Standard: DIN 125-A, DIN 934
Drill Hole Dia. mm: 8
Edge Distance mm: 55
Fixture Hole Diameter mm: 9
Included Items: M8 Hex Full Nuts & Form A Washers
Max Fixture Thickness mm: 45
Min Drill Hole Depth mm: 45
Nut Size mm: M8
Nut Socket Size mm: 13
Nut Type: Hex Full
Size Thread Dia. x L mm: M8 x 100
Substrates: Concrete
Thread Dia. mm: M8
Thread Type: Metric
Washer Size mm: M8 x 17
Washer Type: Form A

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded. Double countersunk head reduces the likelihood of head shear and assists completion of countersinking. Partially threaded from 1 1/4 and above. Made from C10-18 steel to ensure consistent quality. 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance. Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility.
25° sharp point and single lead for a fast start and improved thread acceptance.

TECHNICAL DATA:
Thread Dia. mm: 3.9
Length mm: 33
Thread Length mm: 21.8
Size mm: 3.9 x 33
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 7.45
Substrates: Softwood
Gauge: 7
Salt Spray Resistance BS EN 9227 Hrs: 72
Corrosion Rating: 1 - Clean, dry; low humidity environments
Length inch: 1
Driver Bit Size: PZ2
Thread Type: 60° Twin Threads
Point Type: 25° Sharp
Size imp.: 7 x 1

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.
Double countersunk head reduces the likelihood of head shear and assists completion of countersinking.
Partially threaded from 1 1/4 and above.
Made from C10-18 steel to ensure consistent quality.
60° twin-threads with parallel shank for faster insertion and greater pull-out resistance .
Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility.
25° sharp point and single lead for a fast start and improved thread acceptance.

TECHNICAL DATA:
Thread Dia. mm: 4
Length mm: 12
Thread Length mm: 7
Size mm: 4.0 x 12
Pack Quantity Unit: Pieces
Recess Type: Pozi
Head Dia. mm: 8.06
Substrates: Softwood
Gauge: 8
Salt Spray Resistance BS EN 9227 Hrs: 72
Corrosion Rating: 1 - Clean, dry; low humidity environments
Driver Bit Size: PZ2
Thread Type: 60° Twin Threads
Point Type: 25° Sharp

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug.

• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially threaded from 1 1/4” and above
• Made from C10-18 steel to ensure consistent quality
• 60° twin-threads with parallel shank for faster insertion and greater pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• 25° sharp point and single lead for a fast start and improved thread acceptance

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Wafer head for improved clamping and a low profile finish.
Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
Wafer head countersunk and TX40 recess.
Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012.
Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion.
Helix shank for removing debris and to improve clamping.
50° deep single thread to provide a secure fixing with high pull-out resistance .
Single slash point to reduce torque and the risk of timber splitting at low edge distance

TECHNICAL DATA:
Thread Dia. mm: 8
Driver Bit Type: TX Drive
Length mm: 200
Thread Length mm: 70
Size mm: 8.0 x 200
Fixed Washer Dia. mm: 21
Pack Quantity Unit: Pieces
Recess Type: TX Drive
Head Dia. mm: 20.84
Substrates: Hardwood, Softwood
Lubrication: Wax
Salt Spray Resistance BS EN 9227 Hrs: 1000
Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere
Included Items: TX40 S2 Bit (Qty 1)
Shank Type: Helix
Driver Bit Size: TX40
Thread Type: 50° Single Deep
Point Type: 25° Sharp with Single Slash
Pack Dimensions L x W x H mm: 230 x 90 x 90
Pack Weight kg: 2.38
Application: Framing, Landscaping, Decking, Fencing, Stairs, Roofing, Gazebos, Pergolas, Sleepers

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Wafer head for improved clamping and a low profile finish.
Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
Wafer head countersunk and TX40 recess.
Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012.
Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion.
Helix shank for removing debris and to improve clamping.
50° deep single thread to provide a secure fixing with high pull-out resistance .
Single slash point to reduce torque and the risk of timber splitting at low edge distance

TECHNICAL DATA:
Thread Dia. mm: 8
Driver Bit Type: TX Drive
Length mm: 200
Thread Length mm: 70
Size mm: 8.0 x 200
Fixed Washer Dia. mm: 21
Pack Quantity Unit: Pieces
Recess Type: TX Drive
Head Dia. mm: 20.84
Substrates: Hardwood, Softwood
Lubrication: Wax
Salt Spray Resistance BS EN 9227 Hrs: 1000
Corrosion Rating: 3 - Urban; industrial areas with a low salt atmosphere
Included Items: TX40 S2 Bit (Qty 1)
Shank Type: Helix
Driver Bit Size: TX40
Thread Type: 50° Single Deep
Point Type: 25° Sharp with Single Slash
Pack Dimensions L x W x H mm: 230 x 90 x 90
Pack Weight kg: 2.38
Application: Framing, Landscaping, Decking, Fencing, Stairs, Roofing, Gazebos, Pergolas, Sleepers