Fixings & Mastic

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

**Sold Individually**

"Mild Steel. Finish: Zinc Plated. Bright zinc plated for increased corrosion resistance. 25mm outside diameter. Main purpose of washers is to distribute the load under a bolt head or nut face."

**Sold Individually**

"Mild Steel. Finish: Zinc Plated. Bright zinc plated for increased corrosion resistance. 25mm outside diameter. Main purpose of washers is to distribute the load under a bolt head or nut face."

Machine Screw. Head: Pan head, phillips compatible drive. Finish: Zinc Plated. Pan head has a flat under head surface allowing the screw to lay flat.

"Machine Screw. Head: Pan head, phillips compatible drive. Finish: Zinc Plated. Pan head has a flat under head surface allowing the screw to lay flat."

Square profile. Steel. Finish: Zinc Plated. Split at one point and bent into a helical shape.

"Wing Nuts and Washers. Mild Steel. Finish: Zinc Plated. Wings enable easy fastening without the use of tools. Wing nuts and washers together offering total fastening solution."

"Square profile. Steel. Finish: Zinc Plated. Split at one point and bent into a helical shape."

General use with full round head for clamping. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 2.65 Approx. Pcs Per 1kg: 440 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Length mm: 50 Size mm: 50 x 2.65 Weight kg: 25 Type: Round Wire

General use with full round head for clamping. For medium duty rust protection. Conforms to Eurocode 5 and service class 2. TECHNICAL DATA: Shank Dia. mm: 2.65 Approx. Pcs Per 1kg: 350 Service Class 2 Corrosion Rating 2 - Occasionally damp/wet, rural and sheltered areas Length mm: 65 Size mm: 65 x 2.65 Weight kg: 0.5 Type: Round Wire

Gorilla Glue is a polyurethane glue. When exposed to moisture, the adhesive reacts and creates a foaming action that fills whilst it sticks. Gorilla Glue has an open working time of 20 minutes. The glue is brown in colour, but dries a tan colour, and is totally waterproof. Gorilla Glue is incredibly strong, bonding all types of wood, including pressure treated wood. It also bonds stone, metal, ceramics, foam, glass, leather and more. Once dried the product is sandable, stainable, paintable and can also take a varnish. Due to its foaming action the glue gives greater coverage - up to 3 times the coverage of other glues. This glue is unaffected by extreme hot and cold and will not break down when exposed to rain and snow. The Gorilla Glue formula bonds materials that typical all-purpose adhesives will not hold, including wood, stone, metal ceramics, glass, foam and even bonds dissimilar materials. It is waterproof and temperature resistant, which means it can be used for indoor and outdoor projects and repairs. Originally used as a commercial adhesive for hard-to-glue materials. Once something is glued it will not come undone - it is set to survive years after the repair.

Its high strength and quick set time make Gorilla Super Glue the go-to adhesive for a variety of household projects. Developed for long-lasting repairs in an instant, the clear glue dries in 10-45 seconds.

"EVO-STIK GRIPFILL™ is the nation's no.1 multi-purpose, gap-filling adhesive. It has superior final bond strength and can be used on uneven surfaces. It will bond most building materials and can be used for interior and exterior applications. The nation's no.1 gap-filling adhesive! Superior final bond strength. Will bond most building materials. Can be used on uneven surfaces. Suitable for interior and exterior use."

**Sold Individually** Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments DIN Standard: DIN 975 Size Thread Dia. x L mm: M10 x 1000 Thread Dia. mm: M10 Thread Type: Metric

**Sold Individually** Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments DIN Standard: DIN 975 Size Thread Dia. x L mm: M12 x 1000 Thread Dia. mm: M12 Thread Type: Metric

**Sold Individually** Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments DIN Standard: DIN 975 Size Thread Dia. x L mm: M6 x 1000 Thread Dia. mm: M6 Thread Type: Metric

**Sold Individually** Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. Manufactured from grade 8.8 high tensile carbon steel. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments DIN Standard: DIN 975 Size Thread Dia. x L mm: M8 x 1000 Thread Dia. mm: M8 Thread Type: Metric

Mitre Fast Bonding Kit is a two-part instant adhesive system comprising a cyanoacrylate adhesive and aerosol activator. Mitre Fast is mainly used in the furniture, timber, kitchen and plastics industries where its instant bonding properties dramatically reduce assembly times for mitre joints when compared to conventional wood adhesives. Also suitable for bonding of MDF, rubber, PVCu, metals etc.

"38mm Electro Galvanised Angled Brads. The stronger, stiffer 16 gauge nail ensures consistent drivability. 17 gauge size creates smaller hole to provide excellent finishing."

"3.1 x 63mm Galv-Plus® Ring Shank Nail. Paslode nailing system provides the highest level of safety & local technical support. Paslode provides a suitable nail for every application. Service Class 2 - Indoors, Not Heated, Outdoors Protected. Best driveability coating for increased driveability. Paslode nails are CE marked & EC5 compliant."

"3.1 x 90mm Galv-Plus® Smooth Nail. Paslode nailing system provides the highest level of safety & local technical support. Paslode provides a suitable nail for every application. Service Class 2 - Indoors, Not Heated, Outdoors Protected. Best driveability coating for increased driveability. Paslode nails are CE marked & EC5 compliant."

Pinkgrip is a revolutionary direct bond adhesive specifically formulated for the professional user, using polymers at the leading edge of adhesive technology. Pinkgrip will stick just about anything on a building site that needs sticking. Its amazing grabbing strength not only removes the need to pin under the work piece to prevent slumping, but its revolutionary initial Direct Bond eliminates the need for double stick methods. Pinkgrip can be used inside and outside and adheres to just about every building substrate, providing the following key benefits: - Enhanced slump resistance for quick and simple direct bonding to most substrates without the use of temporary supports in most applications. - Excellent early and ultimate adhesive strength on porous substrates. - Excellent gap filling properties to accommodate uneven surfaces. - Good nip off qualities to prevent messy stringing of the adhesive

Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications. NOTE: It may be beneficial to reduce drill diameter in soft materials.

Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications. NOTE: It may be beneficial to reduce drill diameter in soft materials.

Rawlplug® UNO® Plugs are truly universal plugs which fix into any wall, ceiling or floor. Suitable for use in: concrete, brickwork, stone, blockwork, plasterboard. They have a unique design with expansion throughout the length of the plug. They expand at the top giving instant grip. Anti-rotation features prevent spinning in the hole. Screw Head Size: Yellow: 3-4.5mm Red: 3.5-5mm Brown: 4-6mm Blue: 4.5-6mm Grey: 5-8mm Typical Applications: - Shelving and cabinets - Suspended ceilings - Switch boxes - Trunking and cable trays - Water heaters and radiators These Rawlplug® UNO® Plugs have the following specification: Colour: Blue Size: 8 x 32mm Pack Size: 80

Rawlplug® UNO® Plugs are truly universal plugs which fix into any wall, ceiling or floor. Suitable for use in: concrete, brickwork, stone, blockwork, plasterboard. They have a unique design with expansion throughout the length of the plug. They expand at the top giving instant grip. Anti-rotation features prevent spinning in the hole. Screw Head Size: Yellow: 3-4.5mm Red: 3.5-5mm Brown: 4-6mm Blue: 4.5-6mm Grey: 5-8mm Typical Applications: - Shelving and cabinets - Suspended ceilings - Switch boxes - Trunking and cable trays - Water heaters and radiators These Rawlplug® UNO® Plugs have the following specification: Colour: Red Size: 6 x 28mm Pack Size: 96

Box Contains: 3.5 x 40mm x 200pcs (Approx) 4.0 x 30mm x 200pcs (Approx) 4.0 x 40mm x 200pcs (Approx) 4.0 x 50mm x 200pcs (Approx) 5.0 x 50mm x 200pcs (Approx) 5.0 x 60mm x 200pcs (Approx) 5.0 x 100mm x 200pcs (Approx) PZ2 Screwdriver Bit x 2

Diameter - 4.0mm Thread form - Full Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 5.0mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 5.0mm Thread form - Full Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 5.0mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Reisser Cutter Full Thread Screws Tub 5.0 x 80mm - 400pc Diameter - 5.0mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 5.0mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 3.5mm Thread form - Full Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 3.5mm Thread form - Full Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 4.0mm Thread form - Full Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 4.0mm Thread form - Full Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 4.0mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 4.5mm Thread form - Full Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 4.5mm Thread form - Full Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 4.5mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 4.5mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 4.5mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 6.0mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Diameter - 6.0mm Thread form - Part Characteristics • Yellow tropicalized finish. • Deep pozi drive to reduce "cam-out". • "Ribs and tucks" perform self countersink operation. Deep re-inforced head for strength. • Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers. • Needle point for immediate start. • Single, wide, deep, lubricated thread for lower driving resistance and fast insertion. Applications • For all wood applications. • For soft wood applications. • For hard wood applications • For board material applications.

Soudals Soudabond Easy is is a high performance polyurethane adhesive foam. Replaces traditional powder based adhesives. The formula combines strong adhesion with filling characteristics, making it suitable for bonding uneven surfaces.

Soudal Trade 30 minute D4 wood adhesive is a 30 minute liquid PU wood adhesive. It is a polyurethane based adhesive with D4 water resistance, Professional quality with extra fast drying time and strength build up.

Soudal Trade Exterior Silicone is a low modulus neutral (LMN) formulation for high movement joints.

Soudal Trade Exterior Silicone is a low modulus neutral (LMN) formulation for high movement joints.

Soudal Trade Exterior Silicone is a low modulus neutral (LMN) formulation for high movement joints.

Soudal Trade Exterior Silicone is a low modulus neutral (LMN) formulation for high movement joints.