Search
Show prices tax inclusive Show prices tax exclusive
Show prices tax inclusive
Roofing & Ventilation
A Type Universal Valley Trough
73087
Installation
Valley boards should be fitted of sufficient width to provide support for the roofing battens, either: min.12mm ply lay boards set between rafters, or 6mm continuous ply boards laid over the rafters.
A single strip of roofing underlay should be laid up the centre of the valley.
Counter battens the same depth as the roofing battens should be fitted onto the valley boards.
The main roofing underlay should be laid over th counter batten. Roofing battens should be fitted with the ends firmly located onto the valley boards, positioned close to the counter batten, with care taken to avoid damaging the underlay.
The fascia board should be cut to allow the GRP valley trough to pass through and discharge into the gutter without flattening out. The end of the GRP valley trough should be trimmed using a fine toothed hacksaw to the appropriate centre line of the gutter - which normally entails a ‘v’ shaped cut.
The GRP valley trough should be fitted with care taken to ensure it is centrally located between the valley boards: the sides should be nailed to the counter battens at max: 500mm centres.
Warning: Concealed water troughs behind the mortar bonding strip MUST be kept clear and not blocked with mortar. Take care to maintain correct width between cut edges. NFRC recommend that tiles should not be cut in situ and should not be laid dry and then back fill pointed.
Properties
LEAD REPLACEMENT
GRP lasts as long as lead, is tougher, cheaper, more resistant to accidental damage, and is less prone to theft or vandalism. Using preformed GRP valley troughs saves significant installation time over traditional methods. Roofers report elimination of many problems with valley troughs when changing from lead to CORODRAIN GRP. Coloured lead grey as standard (other colours available on request).
DURABILITY
Made with high quality un-filled polyester resin with glass fibre reinforcement for maximum strength. A tough bonded melinex film gives excellent weathering performance. Minimum life of 30 years.
MANUFACTURED IN UK
Manufactured to BS EN ISO 9001:2008 quality standard, our automated continuous pultrusion plant in Coventry. All available from stock for rapid delivery to site.
NO MAINTENANCE
The inherent qualities of the materials make the valleys UV light and acid rain resistant, and the smooth surface finish inhibits the growth of moss, lichen and the build up of debris.
Valley Weights
Standard valley troughs: 1.64kg/m²
Heavy Duty valley troughs: 2.10kg/m²
Valley Thicknesses
Standard valley troughs: 1.3mm
Heavy Duty troughs: 1.6mm
Valley boards should be fitted of sufficient width to provide support for the roofing battens, either: min.12mm ply lay boards set between rafters, or 6mm continuous ply boards laid over the rafters.
A single strip of roofing underlay should be laid up the centre of the valley.
Counter battens the same depth as the roofing battens should be fitted onto the valley boards.
The main roofing underlay should be laid over th counter batten. Roofing battens should be fitted with the ends firmly located onto the valley boards, positioned close to the counter batten, with care taken to avoid damaging the underlay.
The fascia board should be cut to allow the GRP valley trough to pass through and discharge into the gutter without flattening out. The end of the GRP valley trough should be trimmed using a fine toothed hacksaw to the appropriate centre line of the gutter - which normally entails a ‘v’ shaped cut.
The GRP valley trough should be fitted with care taken to ensure it is centrally located between the valley boards: the sides should be nailed to the counter battens at max: 500mm centres.
Warning: Concealed water troughs behind the mortar bonding strip MUST be kept clear and not blocked with mortar. Take care to maintain correct width between cut edges. NFRC recommend that tiles should not be cut in situ and should not be laid dry and then back fill pointed.
Properties
LEAD REPLACEMENT
GRP lasts as long as lead, is tougher, cheaper, more resistant to accidental damage, and is less prone to theft or vandalism. Using preformed GRP valley troughs saves significant installation time over traditional methods. Roofers report elimination of many problems with valley troughs when changing from lead to CORODRAIN GRP. Coloured lead grey as standard (other colours available on request).
DURABILITY
Made with high quality un-filled polyester resin with glass fibre reinforcement for maximum strength. A tough bonded melinex film gives excellent weathering performance. Minimum life of 30 years.
MANUFACTURED IN UK
Manufactured to BS EN ISO 9001:2008 quality standard, our automated continuous pultrusion plant in Coventry. All available from stock for rapid delivery to site.
NO MAINTENANCE
The inherent qualities of the materials make the valleys UV light and acid rain resistant, and the smooth surface finish inhibits the growth of moss, lichen and the build up of debris.
Valley Weights
Standard valley troughs: 1.64kg/m²
Heavy Duty valley troughs: 2.10kg/m²
Valley Thicknesses
Standard valley troughs: 1.3mm
Heavy Duty troughs: 1.6mm
£29.57
ACRYPOL Flexiglass Catalyst 100g
64063
The catalyst is the primary component of any fibreglass flat roofing system – see the Flexiglass application guide for full dosage rates.
£5.75
ACRYPOL Flexiglass Catalyst 50g
64062
The catalyst is the primary component of any fibreglass flat roofing system – see the Flexiglass application guide for full dosage rates.
£3.80
ACRYPOL Flexiglass Primer 5Kg
64057
Pre-promoted, Low Viscosity, Thixotropic, Polyester Flexible Primer designed specifically for Overlay Roofing application enabling an outstanding bond to multiple substrates.
£104.85
ACRYPOL Flexiglass Resin 20Kg
64056
A pre-promoted thixotropic polyester flexible resin designed specifically for overlay roofing applications
£280.83
Acrypol+ Waterproof Roof Coating 5kg
38023
It was specifically developed to provide a solution for undertaking day to day refurbishment of failed industrial, commercial or domestic flat roofs as well as general patching repairs. Brush applied as a semi-liquid paste; it dries to form an ultra-tough, seamless, flexible overlay. Known as the original waterproof coating, Acrypol+ can be applied during damp weather conditions and still provide a long-term solution to waterproofing problems, including flat roof repair.
Acrypol+ is the original name in waterproofing with more than 30 years of recognised excellence within the industry.
A unique resin-based acrylic waterproof protective coating that instantly prevents leaks. It was specifically developed to provide a solution for undertaking day to day refurbishment of failed industrial, commercial or domestic flat roofs as well as general patching repairs. Brush applied as a semi-liquid paste; it dries to form an ultra-tough, seamless, flexible overlay. It is ideal for use on flat roofs, leadwork, slate, asbestos cement, all metals, bituminous surfaces, asphalt, flashings, chimney stacks, glasshouses, PVC, concrete and brick – providing excellent protection. Acrypol+ also has the added benefit of being easy to apply, even in damp weather conditions, while still providing a long-term waterproofing solution.
Acrypol+ is the original name in waterproofing with more than 30 years of recognised excellence within the industry.
A unique resin-based acrylic waterproof protective coating that instantly prevents leaks. It was specifically developed to provide a solution for undertaking day to day refurbishment of failed industrial, commercial or domestic flat roofs as well as general patching repairs. Brush applied as a semi-liquid paste; it dries to form an ultra-tough, seamless, flexible overlay. It is ideal for use on flat roofs, leadwork, slate, asbestos cement, all metals, bituminous surfaces, asphalt, flashings, chimney stacks, glasshouses, PVC, concrete and brick – providing excellent protection. Acrypol+ also has the added benefit of being easy to apply, even in damp weather conditions, while still providing a long-term waterproofing solution.
£83.31
Acrypol+Waterproof Roof Coating 2.5Kg
38018
It was specifically developed to provide a solution for undertaking day to day refurbishment of failed industrial, commercial or domestic flat roofs as well as general patching repairs. Brush applied as a semi-liquid paste; it dries to form an ultra-tough, seamless, flexible overlay. Known as the original waterproof coating, Acrypol+ can be applied during damp weather conditions and still provide a long-term solution to waterproofing problems, including flat roof repair.
Acrypol+ is the original name in waterproofing with more than 30 years of recognised excellence within the industry.
A unique resin-based acrylic waterproof protective coating that instantly prevents leaks. It was specifically developed to provide a solution for undertaking day to day refurbishment of failed industrial, commercial or domestic flat roofs as well as general patching repairs. Brush applied as a semi-liquid paste; it dries to form an ultra-tough, seamless, flexible overlay. It is ideal for use on flat roofs, leadwork, slate, asbestos cement, all metals, bituminous surfaces, asphalt, flashings, chimney stacks, glasshouses, PVC, concrete and brick – providing excellent protection. Acrypol+ also has the added benefit of being easy to apply, even in damp weather conditions, while still providing a long-term waterproofing solution.
Acrypol+ is the original name in waterproofing with more than 30 years of recognised excellence within the industry.
A unique resin-based acrylic waterproof protective coating that instantly prevents leaks. It was specifically developed to provide a solution for undertaking day to day refurbishment of failed industrial, commercial or domestic flat roofs as well as general patching repairs. Brush applied as a semi-liquid paste; it dries to form an ultra-tough, seamless, flexible overlay. It is ideal for use on flat roofs, leadwork, slate, asbestos cement, all metals, bituminous surfaces, asphalt, flashings, chimney stacks, glasshouses, PVC, concrete and brick – providing excellent protection. Acrypol+ also has the added benefit of being easy to apply, even in damp weather conditions, while still providing a long-term waterproofing solution.
£49.79
B Type Valley Trough
73086
Installation
Valley boards should be fitted of sufficient width to provide support for the roofing battens, either: min.12mm ply lay boards set between rafters, or 6mm continuous ply boards laid over the rafters.
A single strip of roofing underlay should be laid up the centre of the valley.
Counter battens the same depth as the roofing battens should be fitted onto the valley boards.
The main roofing underlay should be laid over th counter batten. Roofing battens should be fitted with the ends firmly located onto the valley boards, positioned close to the counter batten, with care taken to avoid damaging the underlay.
The fascia board should be cut to allow the GRP valley trough to pass through and discharge into the gutter without flattening out. The end of the GRP valley trough should be trimmed using a fine toothed hacksaw to the appropriate centre line of the gutter - which normally entails a ‘v’ shaped cut.
The GRP valley trough should be fitted with care taken to ensure it is centrally located between the valley boards: the sides should be nailed to the counter battens at max: 500mm centres.
Warning: Concealed water troughs behind the mortar bonding strip MUST be kept clear and not blocked with mortar.Take care to maintain correct width between cut edges. NFRC recommend that tiles should not be cut in situ and should not be laid dry and then back fill pointed.
Properties
LEAD REPLACEMENT
GRP lasts as long as lead, is tougher, cheaper, more resistant to accidental damage, and is less prone to theft or vandalism. Using preformed GRP valley troughs saves significant installation time over traditional methods. Roofers report elimination of many problems with valley troughs when changing from lead to CORODRAIN GRP. Coloured lead grey as standard (other colours available on request).
DURABILITY
Made with high quality un-filled polyester resin with glass fibre reinforcement for maximum strength. A tough bonded melinex film gives excellent weathering performance. Minimum life of 30 years.
MANUFACTURED IN UK
Manufactured to BS EN ISO 9001:2008 quality standard, our automated continuous pultrusion plant in Coventry. All available from stock for rapid delivery to site.
NO MAINTENANCE
The inherent qualities of the materials make the valleys UV light and acid rain resistant, and the smooth surface finish inhibits the growth of moss, lichen and the build up of debris.
Valley Weights
Standard valley troughs: 1.64kg/m²
Heavy Duty valley troughs: 2.10kg/m²
Valley Thicknesses
Standard valley troughs: 1.3mm
Heavy Duty troughs: 1.6mm
Valley boards should be fitted of sufficient width to provide support for the roofing battens, either: min.12mm ply lay boards set between rafters, or 6mm continuous ply boards laid over the rafters.
A single strip of roofing underlay should be laid up the centre of the valley.
Counter battens the same depth as the roofing battens should be fitted onto the valley boards.
The main roofing underlay should be laid over th counter batten. Roofing battens should be fitted with the ends firmly located onto the valley boards, positioned close to the counter batten, with care taken to avoid damaging the underlay.
The fascia board should be cut to allow the GRP valley trough to pass through and discharge into the gutter without flattening out. The end of the GRP valley trough should be trimmed using a fine toothed hacksaw to the appropriate centre line of the gutter - which normally entails a ‘v’ shaped cut.
The GRP valley trough should be fitted with care taken to ensure it is centrally located between the valley boards: the sides should be nailed to the counter battens at max: 500mm centres.
Warning: Concealed water troughs behind the mortar bonding strip MUST be kept clear and not blocked with mortar.Take care to maintain correct width between cut edges. NFRC recommend that tiles should not be cut in situ and should not be laid dry and then back fill pointed.
Properties
LEAD REPLACEMENT
GRP lasts as long as lead, is tougher, cheaper, more resistant to accidental damage, and is less prone to theft or vandalism. Using preformed GRP valley troughs saves significant installation time over traditional methods. Roofers report elimination of many problems with valley troughs when changing from lead to CORODRAIN GRP. Coloured lead grey as standard (other colours available on request).
DURABILITY
Made with high quality un-filled polyester resin with glass fibre reinforcement for maximum strength. A tough bonded melinex film gives excellent weathering performance. Minimum life of 30 years.
MANUFACTURED IN UK
Manufactured to BS EN ISO 9001:2008 quality standard, our automated continuous pultrusion plant in Coventry. All available from stock for rapid delivery to site.
NO MAINTENANCE
The inherent qualities of the materials make the valleys UV light and acid rain resistant, and the smooth surface finish inhibits the growth of moss, lichen and the build up of debris.
Valley Weights
Standard valley troughs: 1.64kg/m²
Heavy Duty valley troughs: 2.10kg/m²
Valley Thicknesses
Standard valley troughs: 1.3mm
Heavy Duty troughs: 1.6mm
£28.37
Black Jack® 903 Bitumen Trowel Mastic 1 litre
40047
Everbuild Black Jack® 903 Bitumen Trowel Mastic is a black, heavily filled, bituminous compound with added fibres for reinforcement, that is applied by trowel. It is used primarily for patching holes in roofs and bituminous coatings. The product forms a surface skin, but the mass below remains soft to allow for moderate movement.
£13.15
Brett Martin 105mm Round Cast Iron Effect Downpipe Bracket - Classic Black
57084
"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£5.92
Brett Martin 105mm Round Cast Iron Effect Plain Coupler - Classic Black
57083
"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£14.20
Brett Martin 106mm Prostyle Cast Iron Effect External 90° Gutter Angle - Classic Black
55047
"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£21.38
Brett Martin 106mm Prostyle Cast Iron Effect Fascia Bracket - Classic Black
55041
"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£5.41
Brett Martin 106mm Prostyle Cast Iron Effect Gutter x 4m - Classic Black
74045
"This modern and contemporary Prostyle gutter measures 106mm across and is ideal for bungalows and conservatories, whilst it has sufficient capacity to handle larger houses due to its unique design. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£55.25
Brett Martin 106mm Prostyle Cast Iron Effect Internal 90° Gutter Angle - Classic Black
55046
"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£21.38
Brett Martin 106mm Prostyle Cast Iron Effect Left-Hand External Stopend - Classic Black
55044
"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative."
£13.74
Brett Martin 106mm Prostyle Cast Iron Effect Right-Hand External Stopend - Classic Black
55045
"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative."
£13.74
Brett Martin 106mm Prostyle Cast Iron Effect Running Outlet - Classic Black
55043
"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£21.46
Brett Martin 106mm Prostyle Cast Iron Effect Union Bracket - Classic Black
55042
"Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£15.38
Brett Martin 106mm Prostyle External 45° Angle - Black
60095
"Quick & easy to install. Lightweight. UV Resistant."
£13.46
Brett Martin 106mm Prostyle External 90° Angle - Black
60098
"Quick & easy to install. Lightweight. UV Resistant."
£11.66
Brett Martin 106mm Prostyle Fascia Bracket - Black
60102
"Quick & easy to install. Lightweight. UV Resistant."
£2.58
Brett Martin 106mm Prostyle Internal 45° Angle - Black
60096
"Quick & easy to install. Lightweight. UV Resistant."
£13.46
Brett Martin 106mm Prostyle Internal 90° Angle - Black
60094
"Quick & easy to install. Lightweight. UV Resistant."
£11.66
Brett Martin 106mm Prostyle Left Hand External Stopend - Black
60100
"Quick & easy to install. Lightweight. UV Resistant."
£4.88
Brett Martin 106mm Prostyle Left Hand External Stopend - Black
60097
"Quick & easy to install. Lightweight. UV Resistant."
£4.88
Brett Martin 106mm Prostyle Left Hand Stopend Outlet - Black
60099
"Quick & easy to install. Lightweight. UV Resistant."
£11.66
Brett Martin 106mm Prostyle Right Hand Stopend Outlet - Black
60101
"Quick & easy to install. Lightweight. UV Resistant."
£11.66
Brett Martin 106mm Prostyle Running Outlet - Black
60092
"Quick & easy to install. Lightweight. UV Resistant."
£11.66
Brett Martin 106mm Prostyle Union Bracket - Black
60093
"Quick & easy to install. Lightweight. UV Resistant."
£7.72
Brett Martin 106mm x 4m Prostyle Gutter - Black
74039
"This modern and contemporary Prostyle gutter measures 106mm across and is ideal for bungalows and conservatories, whilst it has sufficient capacity to handle larger houses due to its unique design. Quick & easy to install. Lightweight. UV Resistant."
£44.92
Brett Martin 112mm Roundstyle 135° Gutter Angle - Black
18023
"Designed to allow the continuation of the 112mm Roundstyle gutter system at 135° right angles. It features rubber seals and integral clips at both sides for fixing to the gutter. Quick & easy to install. Lightweight. UV Resistant."
£6.88
Brett Martin 112mm Roundstyle 90° Gutter Angle - Black
18024
"Designed to allow the continuation of the 112mm Roundstyle gutter system at 90° right angles. It features rubber seals and integral clips at both sides for fixing to the gutter. Quick & easy to install. Lightweight. UV Resistant."
£6.09
Brett Martin 112mm Roundstyle 90° Gutter Angle - Brown
57078
"Designed to allow the continuation of the 112mm Roundstyle gutter system at 90° right angles. It features rubber seals and integral clips at both sides for fixing to the gutter. Quick & easy to install. Lightweight. UV Resistant."
£8.69
Brett Martin 112mm Roundstyle Cast Iron Effect 135° Gutter Angle - Classic Black
16005
Designed to allow the continuation of the 112mm Roundstyle gutter system at 135° right angles. It features rubber seals and integral clips at both sides for fixing to the gutter.
Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.
Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.
£16.62
Brett Martin 112mm Roundstyle Cast Iron Effect 90° Gutter Angle - Classic Black
16002
Designed to allow the continuation of the 112mm Roundstyle gutter system at 90° right angles. It features rubber seals and integral clips at both sides for fixing to the gutter.
Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.
Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.
£16.62
Brett Martin 112mm Roundstyle Cast Iron Effect External Stopend - Classic Black
16006
This fits to the end of the 112mm Roundstyle gutter length on the outside and prevents rainwater falling from the end of the gutter.
Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.
Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.
£8.42
Brett Martin 112mm Roundstyle Cast Iron Effect Fascia Bracket - Classic Black
16008
This uPVC gutter clip is designed to hold the 112mm Roundstyle gutter in place. It features an integral flexible clip to simply lock the gutter in place and pre-drilled holes for quick and easy fixing to fascia boards.
Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.
Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.
£2.86
Brett Martin 112mm Roundstyle Cast Iron Effect Gutter x 2m - Classic Black
74040
"Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.
An affordable cast iron alternative.
Ready to fit.
10 Year Warranty."
Authentic Cast Iron architectural detailing and finish.
An affordable cast iron alternative.
Ready to fit.
10 Year Warranty."
£17.36
Brett Martin 112mm Roundstyle Cast Iron Effect Gutter x 4m - Classic Black
74014
"This classic 112mm roundstyle gutter is ideal for a range of single and multi-storey dwellings. The half round gutter is used with the 68mm round downpipe and fittings. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative."
£34.74
Brett Martin 112mm Roundstyle Cast Iron Effect Internal Stopend - Anthracite Grey
57085
"This fits to the end of the 112mm Roundstyle gutter run, on the inside, to prevent rainwater spilling from the end of the gutter. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£5.95
Brett Martin 112mm Roundstyle Cast Iron Effect Internal Stopend - Classic Black
16007
This fits to the end of the 112mm Roundstyle gutter run, on the inside, to prevent rainwater spilling from the end of the gutter.
Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.
Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.
£7.37
Brett Martin 112mm Roundstyle Cast Iron Effect Running Outlet - Classic Black
16001
The design of the 112mm running outlet allows it to be converted into a stopend outlet. Simply trim off the exposed fixing lug and insert an internal stopend, thus preventing the need for handed stopend outlet components.
Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.
Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.
£16.23
Brett Martin 112mm Roundstyle Cast Iron Effect Union Bracket - Classic Black
16009
Used to join two lengths of gutter together. It features integral seals to ensure water tightness and pre-drilled fixing holes for easy fixing.
Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.
Quick & easy to install.
Authentic Cast Iron architectural detailing and finish.
£12.43
Brett Martin 112mm Roundstyle External Stopend - Arctic White
18012
"This fits to the end of the 112mm Roundstyle gutter length on the outside and prevents rainwater falling from the end of the gutter. Quick & easy to install. Lightweight. UV Resistant."
£2.41
Brett Martin 112mm Roundstyle External Stopend - Black
18025
"This fits to the end of the 112mm Roundstyle gutter length on the outside and prevents rainwater falling from the end of the gutter. Quick & easy to install. Lightweight. UV Resistant."
£2.41
Brett Martin 112mm Roundstyle Gutter Support Bracket - Arctic White
18008
"This uPVC gutter clip is designed to hold the 112mm Roundstyle gutter in place. It features an integral flexible clip to simply lock the gutter in place and pre-drilled holes for quick and easy fixing to fascia boards. Quick & easy to install. Lightweight. UV Resistant."
£1.19
Brett Martin 112mm Roundstyle Gutter Support Bracket - Black
18021
"This uPVC gutter clip is designed to hold the 112mm Roundstyle gutter in place. It features an integral flexible clip to simply lock the gutter in place and pre-drilled holes for quick and easy fixing to fascia boards. Quick & easy to install. Lightweight. UV Resistant."
£1.19
Brett Martin 112mm Roundstyle Gutter Union Bracket - Arctic White
18007
Used to join two lengths of gutter together. It features integral seals to ensure water tightness and pre-drilled fixing holes for easy fixing.
Quick & easy to install.
Quick & easy to install.
£4.00
Brett Martin 112mm Roundstyle Gutter Union Bracket - Black
18020
"Used to join two lengths of gutter together. It features integral seals to ensure water tightness and pre-drilled fixing holes for easy fixing. Quick & easy to install. Lightweight. UV Resistant."
£4.00
Brett Martin 112mm Roundstyle Gutter x 4m - Black
74012
"This classic 112mm roundstyle gutter is ideal for a range of single and multi-storey dwellings. The half round gutter is used with the 68mm round downpipe and fittings. Quick & easy to install. Lightweight. UV Resistant."
£21.00
Brett Martin 112mm Roundstyle Internal Stopend - Arctic White
18013
"This fits to the end of the 112mm Roundstyle gutter run, on the inside, to prevent rainwater spilling from the end of the gutter. Quick & easy to install. Lightweight. UV Resistant."
£2.22
Brett Martin 112mm Roundstyle Internal Stopend - Black
18026
"This fits to the end of the 112mm Roundstyle gutter run, on the inside, to prevent rainwater spilling from the end of the gutter. Quick & easy to install. Lightweight. UV Resistant."
£2.22
Brett Martin 112mm Roundstyle Rafter Side Gutter Bracket - Silver
16004
This metal rafter side bracket is used in conjunction with the 112mm fascia bracket to fix Brett Martin’s 112mm Roundstyle gutter system to buildings where there is no fascia board, commonly found on barns and country houses.
Quick & easy to install.
Lightweight.
Quick & easy to install.
Lightweight.
£13.48
Brett Martin 112mm Roundstyle Running Outlet - Arctic White
18006
"The design of the 112mm running outlet allows it to be converted into a stopend outlet. Simply trim off the exposed fixing lug and insert an internal stopend, thus preventing the need for handed stopend outlet components. Quick & easy to install. Lightweight. UV Resistant."
£5.40
Brett Martin 112mm Roundstyle Running Outlet - Black
18019
"The design of the 112mm running outlet allows it to be converted into a stopend outlet. Simply trim off the exposed fixing lug and insert an internal stopend, thus preventing the need for handed stopend outlet components. Quick & easy to install. Lightweight. UV Resistant."
£5.40
Brett Martin 112mm Roundstyle Stopend Outlet - Black
57079
"Quick & easy to install. Lightweight. UV Resistant."
£10.31
Brett Martin 112mm Roundstyle to Half Round Adaptor - Black
16026
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£8.85
Brett Martin 112mm Roundstyle to Half Round Adaptor - White
16027
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£8.85
Brett Martin 112mm x 2m Roundstyle Gutter - Arctic White
74032
"This classic 112mm roundstyle gutter is ideal for a range of single and multi-storey dwellings and is used with the 68mm round downpipe and fittings. Quick & easy to install. Lightweight. UV Resistant.."
£12.85
Brett Martin 112mm x 2m Roundstyle Gutter - Black
74031
"This classic 112mm roundstyle gutter is ideal for a range of single and multi-storey dwellings and is used with the 68mm round downpipe and fittings. Quick & easy to install. Lightweight. UV Resistant.."
£12.85
Brett Martin 112mm x 4m Roundstyle Gutter - Artic White
74013
"This classic 112mm roundstyle gutter is ideal for a range of single and multi-storey dwellings. The half round gutter is used with the 68mm round downpipe and fittings. Quick & easy to install. Lightweight. UV Resistant."
£21.00
Brett Martin 114mm Squarestyle 135° Gutter Angle - Arctic White
17015
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£6.88
Brett Martin 114mm Squarestyle 135° Gutter Angle - Black
17030
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£6.88
Brett Martin 114mm Squarestyle 90° Gutter Angle - Arctic White
17010
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£6.09
Brett Martin 114mm Squarestyle 90° Gutter Angle - Black
17025
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£6.09
Brett Martin 114mm Squarestyle External Stopend - Arctic White
17013
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£2.41
Brett Martin 114mm Squarestyle Gutter Support Bracket - Arctic White
17008
Used to hold the 114mm Squarestyle gutter in place. It features an integral flexible clip to simply lock the gutter in place and pre-drilled holes for quick and easy fixing to fascia boards.
Quick & easy to install.
Lightweight.
Quick & easy to install.
Lightweight.
£1.19
Brett Martin 114mm Squarestyle Gutter Support Bracket - Black
17023
Used to hold the 114mm Squarestyle gutter in place. It features an integral flexible clip to simply lock the gutter in place and pre-drilled holes for quick and easy fixing to fascia boards.
Quick & easy to install.
Lightweight.
Quick & easy to install.
Lightweight.
£1.19
Brett Martin 114mm Squarestyle Gutter Union Bracket - Arctic White
17009
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£4.00
Brett Martin 114mm Squarestyle Gutter Union Bracket - Black
17024
Quick & easy to install.
Lightweight.
UV Resistant.
Integral fixing clips.
Lightweight.
UV Resistant.
Integral fixing clips.
£4.00
Brett Martin 114mm Squarestyle Internal Stopend - Arctic White
17012
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£2.22
Brett Martin 114mm Squarestyle Internal Stopend - Black
17027
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£2.22
Brett Martin 114mm Squarestyle Internal Stopend - Black
17028
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£2.41
Brett Martin 114mm Squarestyle Running Outlet - Arctic White
17014
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£5.40
Brett Martin 114mm Squarestyle Running Outlet - Black
17029
Quick & easy to install.
Lightweight.
UV Resistant.
Integral fixing clips.
Lightweight.
UV Resistant.
Integral fixing clips.
£5.40
Brett Martin 114mm Squarestyle Stopend Outlet - Arctic White
17011
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£5.81
Brett Martin 114mm Squarestyle Stopend Outlet - Black
17026
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£5.81
Brett Martin 114mm Squarestyle to 112mm Roundstyle Adaptor - Arctic White
16025
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£9.26
Brett Martin 114mm Squarestyle to 112mm Roundstyle Adaptor - Black
16024
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£9.26
Brett Martin 114mm x 2m Squarestyle Gutter - Arctic White
74030
"The contemporary style gutter is suitable for larger domestic roofs and is compatible with the 65mm square downpipe. Quick & easy to install. Lightweight. UV Resistant."
£12.85
Brett Martin 114mm x 2m Squarestyle Gutter - Black
74029
"The contemporary style gutter is suitable for larger domestic roofs and is compatible with the 65mm square downpipe. Quick & easy to install. Lightweight. UV Resistant."
£13.50
Brett Martin 114mm x 4m Squarestyle Gutter - Artic White
74011
"The contemporary style gutter is suitable for larger domestic roofs and is compatible with the 65mm square downpipe. Quick & easy to install. Lightweight. UV Resistant."
£21.00
Brett Martin 114mm x 4m Squarestyle Gutter - Black
74010
"The contemporary style gutter is suitable for larger domestic roofs and is compatible with the 65mm square downpipe. Quick & easy to install. Lightweight. UV Resistant. 4 colour options."
£21.00
Brett Martin 115mm Deepstyle Cast Iron Effect 135° Gutter Angle - Classic Black
55022
"Designed to allow the continuation of the 115mm Deepstyle gutter system at 135° right angles. It features rubber seals and integral clips at both sides for fixing to the gutter. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£24.75
Brett Martin 115mm Deepstyle Cast Iron Effect 90° Gutter Angle - Classic Black
55023
"Designed to allow the continuation of the 115mm Deepstyle gutter system at 90° right angles. It features rubber seals and integral clips at both sides for fixing to the gutter. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£21.53
Brett Martin 115mm Deepstyle Cast Iron Effect External Stopend - Classic Black
55020
"This fits to the end of the 115mm Deepstyle gutter run, on the outside, to prevent rainwater spilling from the end of the gutter. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£12.10
Brett Martin 115mm Deepstyle Cast Iron Effect Fascia Bracket - Classic Black
55017
"Used to hold the 115mm Deepstyle gutter in place. It features an integral flexible clip to simply lock the gutter in place and pre-drilled holes for quick and easy fixing to fascia boards. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£3.90
Brett Martin 115mm Deepstyle Cast Iron Effect Gutter x 4m - Classic Black
74015
"A semi elliptical system offering higher drainage capacity for larger roofs. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative."
£49.72
Brett Martin 115mm Deepstyle Cast Iron Effect Internal Stopend - Classic Black
55019
"This fits to the end of the 115mm Deepstyle gutter run, on the inside, to prevent rainwater spilling from the end of the gutter. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£11.75
Brett Martin 115mm Deepstyle Cast Iron Effect Running Outlet - Classic Black
55018
"This allows rainwater to leave the gutter and flow into the downpipe. It features integral seals and clips at each side for connecting to the gutter as well as pre-drilled holes for fixing to the fascia board. It also features an outlet for connecting to the 68mm Downpipe. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£19.79
Brett Martin 115mm Deepstyle Cast Iron Effect Union Bracket - Classic Black
55021
"Used to join two lengths of 115mm Deepstyle gutter. It features integral seals to ensure water tightness and pre-drilled fixing holes for easy fixing. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty."
£15.25
Brett Martin 115mm Deepstyle Gutter 4m - Anthracite Grey
75005
"A semi elliptical system offering higher drainage capacity for larger roofs. Quick & easy to install. Lightweight. UV Resistant."
£42.00
Brett Martin 115mm Deepstyle Gutter 4m - Black
75003
"A semi elliptical system offering higher drainage capacity for larger roofs. Quick & easy to install. Lightweight. UV Resistant ".
£42.00
Brett Martin 65mm Downpipe 92.5 Bend - Black
17018
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£4.23
Brett Martin 65mm Square 112.5° Bend - Arctic White
17004
This is commonly used to allow the 65mm square downpipe to connect to the running outlet on the gutter and return to the wall to continue the downpipe system
Quick & easy to install.
Lightweight.
Quick & easy to install.
Lightweight.
£4.23
Brett Martin 65mm Square 112.5° Bend - Black
17019
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£4.23
Brett Martin 65mm Square Downpipe 112½° Branch - Arctic White
17006
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£10.33
Brett Martin 65mm Square Downpipe 112½° Branch - Black
17021
Quick & easy to install.
Lightweight.
UV Resistant.
Lightweight.
UV Resistant.
£10.33
Min: £0.00 Max: £2,160.00
£0 £2160
Payment options
