Tools & Site Equipment

The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piece of carbon steel that has been harden and tempered for increased strength and durability.

The cutting edge is wider than the blade with a centre groove for rapid debris removal. The domed head design prevents splintering from continued striking with a hammer.

Made in Sheffield, Britain.

The Vitrex 10 2280 Grout Finisher is a double ended finisher, with a ball end, producing a neat grout line. It has a scraper end for removing excess grout. The VIT10 2280 is easy to clean.

The Vitrex 10 2420 Grout Rake has a tungsten carbide grit edged blade for longer life. It is fitted with a durable nylon handle designed for extra grip.
This Grout rake is used for removing old and discoloured grout.

The Bahco 317 Hacksaw is suitable for all-round use. It has a slim, comfortable frame design to improve access in confined spaces and to allow easier storage. The special grip at the front of the frame provides good support for the guiding hand to ensure superb performance.

The hacksaw frame has an alternative 90° blade mounting for flush cutting. It is supplied complete with a 300mm (12in) 24 TPI reliable and shatterproof Sandflex® bi-metal blade for excellent cutting performance.

Specification

Frame Length: 432mm
Blade Length: 300mm (12in)
Weight: 470g

The Faithfull unvarnished Hand Scrubbing Brush has stiff, short bristles, is ideal for general cleaning and for removing stubborn marks on most surfaces.

Marshalltown wooden handle with threaded end adaptor for use with M26 and M26A Swivel Pole Sanders.

Size: 1.2m (48in).

Faithfull Replacement Pick Handle to fit standard pick axe or mattock eye. Made from straight grained hardwood with a waxed finish.

Made to BS 3823 BW/BR British Standard specification which governs density, moisture content, grain, twist, knotting, finish, and staining, etc.

The Faithfull The High Carbon Steel (HCS) Hinge Bore Bit is specially designed for drilling blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. Available in 2 sizes. Suitable for use on all natural woods and man-made materials such as blockboard, melamine faced boards, chipboard and MDF.

High carbon steel (HCS) hinge bits are not recommended for repetitive work in man-made boards. These bits should always be used with a stand-mounted drill.

The Faithfull FAIHBB26HCS HCS Hinge Bore Bit has the following dimensions:
Size: 26mm diameter x 60mm long x 8mm shank.

The Faithfull The High Carbon Steel (HCS) Hinge Bore Bit is specially designed for drilling blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. Available in 2 sizes. Suitable for use on all natural woods and man-made materials such as blockboard, melamine faced boards, chipboard and MDF.

High carbon steel (HCS) hinge bits are not recommended for repetitive work in man-made boards. These bits should always be used with a stand-mounted drill.

The Faithfull FAIHBB35HCS HCS Hinge Bore Bit has the following dimensions:
Size: 35mm diameter x 60mm long x 8mm shank.

This Monument Heavy Duty Basin Wrench is used for fitting back nuts and union nuts, of pillar and bath taps behind basins, sinks and baths.
Manufactured from strong malleable material, the 327R wrench has correctly machined jaws to fit standard nuts, 15 and 22mm.
The offset design allows you to reach behind both sinks & baths easily.

Specification:

Capacity: 1/2 and 3/4in BSP.

Overall Length: 260mm.

Scan Heavy-Duty Rigger Gloves are superior quality heavy-duty cow split leather gloves with a double stitched green split leather reinforced palm, thumb and full wrapped index finger. Have a red fabric back with elasticated braid and 7cm rubberised cuffs, with reinforced fingertips and knuckle strap.

Conforms to EN388:2016 and EN ISO 21420 Standards.

Abrasion Performance Index (1-4): 3
Blade Cut Performance Index (1-5): 2
Tear Performance Index (1-4): 4
Puncture Performance Index (1-4): 4

This Faithfull heavy-duty scratch brush is aimed at the professional user and is capable of extended use in difficult environments.

Wire gauge is 28, hardened and tempered .

3 Row.

This Faithfull heavy-duty scratch brush is aimed at the professional user and is capable of extended use in difficult environments.

Wire gauge is 28, hardened and tempered.

4 Row.

This Faithfull heavy-duty scratch brush is aimed at the professional user and is capable of extended use in difficult environments.

Wire gauge is 28, hardened and tempered.

4 Row with Scraper.

Faithfull Stainless steel wire scratch brushes are used predominantly in stainless steel welding processes, where the use of an ordinary wire scratch brush would create the risk of contamination of the weld.

Tufts are of 316 grade stainless steel wire.

4 Row.

The Vitrex 10 1490 Heavy-Duty Tile Cutter is fitted with a tungsten carbide wheel (10mm) for scoring and snapping ceramic tiles up to 10mm thick. The body is manufactured from heavy-duty steel and is fitted with plastic hand grips for extra comfort during use.

Suitable for straight and freehand cutting.

Spare Parts Kit available. (VIT101493)

Faithfull fawn foot pattern Axe Handle made from top grade hickory, which is recommended for all striking tools because of its shock absorbing properties. Manufactured to BS 3823 BW/BR standards specification. Various lengths and eye sizes available.

Length: 915 x 58.5mm (36 x 2.5/16in)

The Faithfull replacement sledge hammer handle in straight grained hickory to BS3823, with a waxed finish.

Length: 600mm (24 in)

The Faithfull High Speed Steel Rosehead Chubby 90° included angle Countersink is used for countersinking screw holes for flush fitting of screw heads in mild steel, plastics and non-ferrous metals.
They are also suitable for working on wood, plywood, MDF, and other man-made boards. They can be used in both hand tools, and power drills.

Specifications:

Type: Rosehead - Chubby.
Size: 13mm (1/2in).
Shank Diameter: 6mm (1/4in).

The HiKOKI G12STX Angle Grinder has a powerful motor with excellent overload durability and a top mounted on/off switch. With a no voltage restart protection feature to prevent the tool from restarting after the power has been temporarily cut off during operation. Ideal for a multitude of applications including removal of casting and finishing of various types of steel, bronze and aluminium materials.

Supplied with: 1 x Side Handle, 1 x Wrench and 1 x FREE Diamond Blade.

Specifications:

Input Power: 600W.
No Load Speed: 11,500/min.
Disc Size: 115mm.
Spindle: M14.
Overall Length: 254mm.

The MEGABAG can hold up to 1.5 tonnes of weight – that’s the weight of a Ford Focus! Fill it to the brim, book your collection and we’ll be around to pick it up!

how it works

1 - Buy it
Order online from HIPPO now and we aim to deliver to your home the next working day: you can also get your pre-paid collection code at the same time. Alternatively, you can buy HIPPOBAGs online from all the great DIY stores.

2 - Fill it
Take your time, our HIPPOBAGs are flat-packed for easy storage, ready to fill, whenever you want. Don’t forget that, unlike some other waste companies, we’re happy to take your heavy waste: soil, rubble and bricks are no problem!

3 - Book it
When you’re ready for us to take it away, book a collection either using your pre-paid collection code or if you don’t have one, you can buy your collection online. Or, just give our friendly team a call.

4 - We collect
Contact free collection and thanks to our brilliant team of HIPPO drivers we’ll be there as quickly as we can.

**PLEASE NOTE** - PC Building Supplies Ltd is only a stockist of the HIPPO bags, we cannot collect or arrange collection on your behalf. you will need to contact HIPPO Directly.

The MIDIBAG can hold up to 1 tonne of weight – that’s the weight of a fully grown polar bear! Even when full, you’d be hard pushed to reach the weight limit.

how it works

1 - Buy it
Order online from HIPPO now and we aim to deliver to your home the next working day: you can also get your pre-paid collection code at the same time. Alternatively, you can buy HIPPOBAGs online from all the great DIY stores.

2 - Fill it
Take your time, our HIPPOBAGs are flat-packed for easy storage, ready to fill, whenever you want. Don’t forget that, unlike some other waste companies, we’re happy to take your heavy waste: soil, rubble and bricks are no problem!

3 - Book it
When you’re ready for us to take it away, book a collection either using your pre-paid collection code or if you don’t have one, you can buy your collection online. Or, just give our friendly team a call.

4 - We collect
Contact free collection and thanks to our brilliant team of HIPPO drivers we’ll be there as quickly as we can.

**PLEASE NOTE** - PC Building Supplies Ltd is only a stockist of the HIPPO bags, we cannot collect or arrange collection on your behalf. you will need to contact HIPPO Directly.

Scan High-Visibility Orange Waistcoat with panels that reflect light to maximise visibility particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

Scan High-Visibility Orange Waistcoat with panels that reflect light to maximise visibility particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

Scan High-Visibility Yellow Waistcoat with panels that reflect light to maximise visibility, particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

Scan High-Visibility Yellow Waistcoat with panels that reflect light to maximise visibility, particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

Scan 45 Piece Household & Burns First Aid Kit in weatherproof 4 pocket travel bag with handle and belt clips. Ideal for use in the home and outdoors. Suitable for burns, grazes, cuts and much more. Contents:

2 x Burn Relief Dressings (1 of each size): 2.5 x 5, 10 x 10cm
2 x Burn Blot Sachet 3.5g
1 x Sterile Medium HSE Dressing 12 x 12cm (unboxed)
10 x Assorted Clear Washproof Plasters
1 x Microporous Tape 1.25cm x 1m
1 x Finger Dressing with Adhesive Fixing 3.5cm
1 x Single Use Triangular bandage 90 x 127cm
3 x Sterile Low Adherent Dressing Pads: 5 x 5cm(x2), 7.5 x 7.5cm(x1), 10 x 10cm(x1)
1 x Conforming Bandage 5cm x 4m
2 x Sterile Dressings (1 of each size): 5 x 7.5, 7.5 x 10cm
2 x Single Pods Eye Wash 20ml
6 x Assorted Safety Pins
4 x Singled Packed Sterile Moist Saline Cleansing Wipes
1 x Pair of Stainless Steel Nurses Scissors 5in
1 x Pair of Vinyl Powder-free Gloves (Medium)
1 x Rebreath Mouth to Mouth Resuscitation Device with Valve
1 x First Aid Guidance Leaflet

Faithfull Step drills are used for cutting varying hole sizes in material up to 4 mm thick without changing the drill bit. Each drill cuts parallel holes within a specific size range, rising in 2mm increments.

Sizes 6 to 30 mm. Increments of 2.0 mm.

Max thickness 4 mm.

Made from HSS ( High-Speed Steel ).

Shank: 10 mm diameter.

1 x supplied in one of the colours shown.

The Hultafors Hi-Vis Retractable Knife has an ergonomic design. Its angled design has a pronounced finger grip and narrowing tip that affords excellent grip when measuring and cutting plasterboard in a single stroke.

The knife has a durable zinc housing with a screw wheel for easy opening without the use of tools. The handle contains a practical, spring-loaded blade magazine holding 10 spare blades (60mm). Few moving parts and magnetic fixings make changing and cleaning blades easy. The blade can be locked in 4 stages.

The Hultafors TC Curved Claw Hammer is forged in one piece for increased durability. Fitted with a vibration damping urethane plug. The thin, strong claw provides easy access without leaving marks. In addition, it is rounded to prevent it tearing your trousers. Ergonomically designed handle with clear end stop and a secure grip.

The Stanley Interlock Snap-Off Blade Knife has a die-cast metal body that is solvent resistant. The durable patented wedge lock action holds the blade securely in position. A simple finger screw action operates the locking mechanism. Suitable for heavy-duty cutting. The knife can be opened and cleaned, making it ideal for applications where material build-up is a problem.

Monument Internal / External Pipe End Deburrer is capable of deburring pipes up to 35mm in diameter.

This IRWIN Jack Twin Pack contains the following:

1 x IRWIN Jack Universal 880 Triple Ground Hardpoint Saw is fitted with a high-quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster-cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing 4X the added protection than the conventional anti-rust agents. The handle is a proven design, light and strong with an ultrasonic welded soft grip for increased hold and enhanced comfort. 90° and 45° angles integrated in the handle aid the user when marking out.

Specifications:

Length: 550mm (22in).
Teeth: 8 TPI.

1 x IRWIN Jack 990UHP Junior / Toolbox Saw with soft-grip for user comfort. The fine toothing gives a superior finish. Ideal for cutting plywood, chipboard and other man-made materials.

Specifications:

Length: 335mm (13in).
Teeth: 12 TPI.

The IRWIN Jack Xpert range of handsaws have evolved into super-efficient cutting tools that have University verified technology at their heart. This triple-ground tooth technology (TGT) not only increases efficiency but also optimises cutting performance on both the push and pull strokes - so you dont have to work so hard.

Hardpoint tenon saw with soft-grip handle for user comfort.

The ideal choice for fine carpentry and can be used with a mitre box.

Size: 250mm (10 in)
Teeth 12 tpi.

RWIN QUICK-GRIP® Clamps can be converted from a clamp to a spreader in seconds, with a clamping hold load of 136kg. The lockable swivel jaw enables uneven surfaces to be clamped and it is fitted with square XP-style protective pads to protect the work surface from damage.

Specifications:

Clamping Capacity: 300mm (12in).
Spreading Capacity: 515mm (20in).
Clamping Force: 136kg.
Pack Quantity: 2.

The Olympia Tools® Jigsaw has a powerful motor. Its adjustable steel base allows for bevel cuts up to 45°. Fitted with an ergonomic soft grip for increased user comfort. Dust extraction is possible via an adaptor (supplied), enabling you to keep the workplace clean and free of debris.

Supplied with: 1 x Vacuum Cleaner Adaptor and 1 x Hex Key.

Specifications:

Input Power: 450W.
Strokes at No Load: 3,000/min.
Stroke Length: 18mm.
Bevel Capacity: 45°.
Capacity: Steel 6mm, Wood 55mm.

Spare blades for Bahco junior hacksaw frames.

Made of hardened and tempered carbon steel.

Teeth milled and set.

Length: 150mm (6 in).
Pack of 10.
32 TPI.

The Stanley 1992B blades are heavy-duty, general-purpose blades, which fit all standard Stanley knives. The trapezoid shaped blades are highly resistant and reversible.

These blades are ideal for carpet, vinyl and any other material requiring a stiffer and stronger blade.

Specifications:

Blade length: 62mm.
Blade thickness: 0.65mm.
Blade height: 19mm.

Pack Qty. Dispenser of 10

Scan Knitshell Latex Palm Gloves are an essential garment for the protection of hands and offer maximum user comfort. Ideal for many work situations, they provide protection against minimal cuts and abrasions. The gloves have a durable non-slip latex coating which provides excellent protection and grip. Knitted wrists ensure comfort.

Conforms to EN 388:2016 and EN ISO 21420 standards.

Abrasion Performance Index (1-4): 2
Blade Cut Performance Index (1-5): 1
Tear Performance Index (1-4): 4
Puncture Performance Index (1-4): 1

These Faithfull Laminated/Wood Jigsaw Blades, in a pack of five, are a clean, precise, straight down cutting blade.
The T101BR are ideal for hardwood, softwood, laminated boards, fibre boards, and plastics.

Specifications:

Type: Carbon Steel ('T' shaft).
Cutting length: 75mm.
TPI: 10.
Quantity: Pack of 5.

Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.

This sturdy float is a lightweight one piece polyurethane moulding. The pattern face is non-absorbent and is used for applying plaster, cement and other building materials.

Large Float Size: 350 x 150mm (14 x 6in)

The Vitrex Large Spreader is a strong flexible plastic spreader with notched edge for fast adhesive application. It has a contoured handle for extra comfort.

This Vitrex 10 2962 is a Large Tile Squeegee for faster grouting. It has a strong flexible plastic blade with a squeegee edge for rapid grouting and the handle is contoured for extra comfort.

Scan Disposable Latex Gloves are lightly powdered inside to absorb moisture, keeping hands dry and sweat-free. The gloves are ambidextrous, meaning that any glove will fit either left or right hands. They are non-sterile.

Manufactured to BS EN 455 parts 1 and 2.

Size: Large
Box Quantity: 100

This Faithfull Lead Dresser is used when moulding or dressing sheet lead, copper, zinc, aluminium and other ductile material.
Lead dressers have rounded corners with a raised handle to provide sufficient clearance for the user’s knuckles when hammering.
The lead dresser is durable, manufactured from tough high density plastic to withstand hammering on the top, or sides.

The Faithfull, robust, L-shaped, plastic Line Blocks are a simple tool quickly adjusted under tension for length and height to ensure courses of bricks are running straight and true.
They feature built-in line storage and are supplied with 18 metres of orange polyethylene brick line.

Specifications:

Material: Plastic.
Length: 18m.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 10mm.
Working Length: 80mm.
Overall Length: 130mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 5mm.
Working Length: 50mm.
Overall Length: 85mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 6mm.
Working Length: 52mm.
Overall Length: 92mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 8mm.
Working Length: 75mm.
Overall Length: 120mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

5 Piece Lip & Spur Wood Drill Bit Set, these are the preferred cutting tip design for drilling wood, these alloy steel drills have a steeper twist and a deeper flute than HSS bits, for rapid clearance of waste. They are ideal for use in dowelling jigs.

Sizes: 4, 5, 6, 8 and 10mm.

4mm: Working Length: 43mm, Overall Length: 75mm.
5mm: Working Length: 50mm, Overall Length: 85mm.
6mm: Working Length: 52mm, Overall Length: 92mm.
8mm: Working Length: 75mm, Overall Length: 120mm.
10mm: Working Length: 80mm, Overall Length: 130mm.

The Irwin Lock-n-Load Quick Change Extension Bit Holders have a LOCK-N-LOAD™ System for one-handed quick release. The jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits.

A carbon steel construction sleeve and body ensures durabilty and long life.

Irwin Lock-n-Load™ Quick Change Extension Bit Holder

Specification:
Insert bit: Standard 1/4 inch.
Length: 150mm.

This R.S.T. London Pattern Brick Trowel has a durable hardened steel blade. Its handle is soft-touch to enhance user comfort.

The traditional London pattern is the standard shape for laying bricks.

Size: 250mm (10 inch).

The Faithfull Pencil Marking Set is designed to aid in the marking of hard to reach places such as drilled holes, tight corners and piping. Each pencil can be used to easily mark any surface, whether it’s wet or dry. If needed, the markings can be wiped clean with a damp cloth.

This set contains the following:

1 x Long Reach Marker.
1 x Pen Holder.
12 x Colour Refills in a handy carry case (6 Black, 3 Red, 3 Yellow).

Ragni small trowel with a flexible 8 x 3in steel blade. It has a comfortable, soft grip handle and is ideal for use in narrow places which are inaccessible to a standard size trowel.

The Monument Heavy-Duty Manhole Cover Lift Keys have rectangular shaped ends (lugs) and a triangular handles that provide a positive grip whilst allowing easy access for gloved hands. They have been zinc plated for increased protection against corrosion.

Pack Quantity: 2

The Monument 1010 are manufactured from a single piece of malleable iron for greater durability and strength, with a tee handle for greater torque and added leverage, and a D-shaped end that fits snug in to most manhole covers for easy and secured lifting.

Designed to make the removal of manhole covers an easier operation. Made with a 100mm (4in) handle and a 125mm (5in) shaft.

Pack Quantity: 2

This R.S.T. Margin Trowel has a carbon steel blade and metal tang. Primarily used to tidy cement and plaster edges.

For comfortable use, the trowel has a Soft Touch handle.

Size: 130 x 40mm (5.1/2 x 1.1/2in)

This Marshalltown Mason's Line is made from twisted nylon that has been heat set after winding to increase stability. Not affected by mortar, oil or mildew and will not absorb water.

Suitable for staking out sites, concrete and landscaping layout and brick/block laying.

Made in the U.S.A

1 x Marshalltown M631 Mason's Line 76.2m (250ft) - Fluorescent Pink.

The IRWIN Vise-Grip Max Leverge End Cutting Pliers feature PowerSlot Technology, that provides 2X more power and half the cutting effort. They are constructed of high-quality steel and are specially coated for superior rust-resistance and longer tool life. The induction-hardened cutting edges are durable enough to cut ACSR, nails, screws and even piano wire without damaging the cutting edge.

They are fitted with industry-leading, three-zone comfort grips that have been contoured for optimal cushion and control allowing the user to make more cuts comfortably. Integrated handle hooks for the Performance Lanyard system, for safer elevated working conditions and easier retrieval when stored.

They are made in Germany and backed by IRWIN's Lifetime Guarantee.

Capacity: 3mm Hard Wire.

Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

The Faithfull Straight cutting jigsaw blade is ideal for very thin sheet metals, non-ferrous metals, and aluminium.
The cutting applications include: Non-Ferrous Metals, Sheet Metal and Aluminium.



Specifications:

Type: High Speed Steel ('T' Shaft).
Cutting length: 50mm.
TPI: 35.
Pack Qty: 5.

The Faithfull straight Metal Cutting Jigsaw Blade, for thin materials, is ideal for thin sheet metals, non-ferrous metals, and aluminium.
The 8009-HSS, coming in a pack of 5, the T118A is made of a good quality, for applications which include: Non-Ferrous Metals, Sheet Metal and Aluminium.

Specifications:

Type: High Speed Steel ('T' Shaft).
Cutting length: 50mm.
TPI: 21.
Pack Qty: 5.

The Faithfull Straight Metal Cutting Jigsaw Blade are built for thick materials, ideal for thick sheet metals, non-ferrous metals, and aluminium.
The T118B come in a pack of 5 and their cutting applications include: Non-Ferrous Metals, Sheet Metal and Aluminium.

FEATURES

Blade reference 4939274652 is especially suited to cutting very thin sheet material because of its low 0.7 mm tooth pitch.

For those professionals desiring extra lifetime and durability we recommend the use of Bi-Metal blades in conjunction with a suitable cooling lubricant, the blades lifetime is double that of non Bi-Metal blades.

FEATURES

The following blades have diagonally sharpened side teeth resulting in a very clear splinter free cut.

FEATURES

Blade 4932373392 is ideally suited for cutting curves and irregular shapes. Use blade 4932373083 for straight cuts.

FEATURES

Traditional blades that deliver good and solid performance.

FEATURES

Impact rated drill bit with ¼″ hex shank optimised for impact drivers.

Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.

QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.

Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.

Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.

FEATURES

Impact rated drill bit with ¼″ hex shank optimised for impact drivers.

Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.

QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.

Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.

Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.

FEATURES

Impact rated drill bit with ¼″ hex shank optimised for impact drivers.

Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.

QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.

Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.

Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.

FEATURES

Impact rated drill bit with ¼″ hex shank optimised for impact drivers.

Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.

QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.

Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.

Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.

FEATURES

Impact rated drill bit with ¼″ hex shank optimised for impact drivers.

Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.

QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.

Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.

Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.

FEATURES

Impact rated drill bit with ¼″ hex shank optimised for impact drivers.

Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.

QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.

Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.

Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.

FEATURES

Custom engineered steel - Milwaukee® custom metal formula makes the SHOCKWAVE™ bits more resistant to shock from impacting.

Optimised SHOCK ZONE™ absorbs up to 3X more torque.

Dual internal magnets ensure magnetism to fasteners.

Auto-Locking - One handed bit release.

¼″ Hex reception (DIN 3126 - E 6.3). Very suitable for high torque and impact applications.

FEATURES

Custom engineered steel and heat treatment for maximum strength and flexibility.

Optimised SHOCK ZONE™ absorbs up to 3X more torque for more resistance to shock from impacting.

Strong magnetic tip for secure grip.

¼″ Hex reception (DIN 3126 - E 6.3). Very suitable for high torque and impact applications.

FEATURES

THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.

Parabolic web cross section: Large web thickness. Strength built in.

Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.

135° Split point - Precision starting, drill bit won't walk on material surface.

Polished finish reduces friction and extends drill bit life.

Impact resistant ABS case with added rubber corner protection.

Accepts higher feed pressure and torque equalling less breakages.

FEATURES
THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.

Parabolic web cross section: Large web thickness. Strength built in.

Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.

135° Split point - Precision starting, drill bit won't walk on material surface.

Polished finish reduces friction and extends drill bit life.

Impact resistant ABS case with added rubber corner protection.

Accepts higher feed pressure and torque equalling less breakages.

FEATURES

THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.

Parabolic web cross section: Large web thickness. Strength built in.

Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.

135° Split point - Precision starting, drill bit won't walk on material surface.

Polished finish reduces friction and extends drill bit life.

Impact resistant ABS case with added rubber corner protection.

Accepts higher feed pressure and torque equalling less breakages.

FEATURES

THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.

Parabolic web cross section: Large web thickness. Strength built in.

Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.

135° Split point - Precision starting, drill bit won't walk on material surface.

Polished finish reduces friction and extends drill bit life.

Impact resistant ABS case with added rubber corner protection.

Accepts higher feed pressure and torque equalling less breakages.

FEATURES

THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.

Parabolic web cross section: Large web thickness. Strength built in.

Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.

135° Split point - Precision starting, drill bit won't walk on material surface.

Polished finish reduces friction and extends drill bit life.

Impact resistant ABS case with added rubber corner protection.

Accepts higher feed pressure and torque equalling less breakages.

FEATURES

THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of a standard drill bit.

Parabolic web cross section: Large web thickness. Strength built in.

Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.

135° Split point - Precision starting, drill bit won't walk on material surface.

Polished finish reduces friction and extends drill bit life.

Impact resistant ABS case with added rubber corner protection.

Accepts higher feed pressure and torque equalling less breakages.

FEATURES

Designed for use with impact drivers the SHOCKWAVE™ IMPACT DUTY accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs.

Laser hardened WEAR GUARD TIP™ for improved wear resistance and protection of the fit over the life of the bit.

SHOCK ZONE™ Geometry - designed to flex:

SHOCK ZONE™ reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE™ design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.

Custom engineered steel - Milwaukee® custom metal formula makes the SHOCKWAVE™ bits more resistant to shock from impacting.

FEATURES
Designed for use with impact drivers the SHOCKWAVE™ IMPACT DUTY accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs.

Laser hardened WEAR GUARD TIP™ for improved wear resistance and protection of the fit over the life of the bit.

SHOCK ZONE™ Geometry - designed to flex:

SHOCK ZONE™ reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE™ design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.

Custom engineered steel - Milwaukee® custom metal formula makes the SHOCKWAVE™ bits more resistant to shock from impacting.

This Faithfull handy pocket-sized caliper is manufactured from a lightweight non-marring carbon fibre material. The digital selection button enables readings to be displayed in either metric or imperial format and will provide precision readings from 0.01mm and 0.0005in.

The calipers have an easy-to-read clear liquid crystal display and can perform internal, external and step measurement functions. A convenient pocket clip is provided to help keep the calipers close at hand and safe.

Specifications:

Measuring range: 0-75mm (0-3in).
Resolution: 0.01mm (0.0005in).
Accuracy: ± 0.02mm (0.001in).
Auto off: 5 minutes.
Display: LCD, character height 8mm.