Tools & Site Equipment

The R.S.T. Drywall Putty Knife with a soft touch handle for increased user comfort. Available with stiff or flexible blades up to 150mm/6in wide.

Flexible blade.

Size: 15.2cm (6 inch).

This R.S.T. Scarifier is used for scratching plaster undercoat. It has a blue steel blade and its soft touch handle increases user comfort.

Size: 200mm (8 inch).

R.S.T. Taping Knife with a blued steel blade. Suitable for drywall lining. Fitted with a soft touch handle for increased user comfort.

The blade is made from blued steel.

This sturdy float is a lightweight one piece polyurethane moulding. The pattern face is non-absorbent and is used for applying plaster, cement and other building materials.

Small Float Size: 280 x 110mm (11 x 4 1/4 in)

This sturdy float is a lightweight one piece polyurethane moulding. The pattern face is non-absorbent and is used for applying plaster, cement and other building materials.

Large Float Size: 350 x 150mm (14 x 6in)

Ragni small trowel with a flexible 8 x 3in steel blade. It has a comfortable, soft grip handle and is ideal for use in narrow places which are inaccessible to a standard size trowel.

The Footprint 620 Line Pins are made from drop-forged, hardened steel with a chrome plated finish. Designed for use when building a wall. Use in conjunction with a length of nylon cord or builder's string to make sure that a course of bricks is straight and true.

Length: 160mm (6.1/4in).

2 x Footprint 620 Line Pins.

Universal Plunger

Builds up pressure of water which forces the obstruction clear.

Size 100mm (4 in)

Universal Drop Scraper which glides over small obstructions and drops into a vertical scraping position to allow offending material to be dragged back towards the operator.

Size: 4 in.

Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.

Size 150mm (6 in)

The Wagner Fence & Decking Sprayer is the quickest, easiest way to apply wood treatment in your garden. It will coat all types of wooden fences, sheds, decking or garden furniture for better looking, longer lasting surface protection. The gun is detachable, allowing easy change of attachment, paint, refill or to clean the gun. It has an extra fine atomisation for uniform paint coverage with a single coat. With 3 paint jet settings for horizontal, vertical or detailed spraying. The paint flow is fully adjustable for precision painting.

Suitable for all standard solvent or water-based fence paint, oil, stain, varnish, wood preservatives and treatment. No need for specialist sprayable paint.

"Advanced high adhesion, dual-sided, textured 'scrub & clean' wipes that quickly & effectively capture & remove a wide variety of construction and maintenance muck & grime such as; PU expanding foam, silicone, acrylic sealants, epoxy fillers, solvent based paints, adhesives, grease, gap fill, oil & much more from hands, tools & surfaces. 100% Biodegradable, made from wood pulp fibres from FSC approved forests Non-bleach, no dye, super-soft fabric is exceptionally absorbent Ideal for cleaning surfaces (counters, worktops, window frames/sills, cabinets/casing, tiles, flooring) as they effectively soak up unwanted leftover dirt & grime to leave any job looking clean and professional Certified antiviral (EN14476) & antibacterial (EN1276) Big Wipes clean AND disinfect to protect you, your colleagues and your customers and keep your workspace and equipment sanitised Dermatologically tested with FOUR skin conditioners to protect & nourish hands, ideal for tradespeople on the move Free of artificial preservatives, parabens & sulphates Non toxic, hazardous & flammable Biodegradable"

Big Wipes Heavy-Duty have a high-performance, dual-sided, textured 'scrub & clean' fabric to quickly and effectively 'grab & remove' even the most stubborn muck and grime. These Heavy-Duty wipes don't mess around easily removing paint, oil, PU foam, silicone, grease, gap fill, adhesive and more from hands, tools & surfaces.

Certified antiviral (EN14476) & antibacterial (EN1276) Big Wipes clean AND disinfect to protect you, your colleagues and your customers and keep your workspace and equipment sanitised

The IRWIN Jack Xpert range of handsaws have evolved into super-efficient cutting tools that have University verified technology at their heart. This triple-ground tooth technology (TGT) not only increases efficiency but also optimises cutting performance on both the push and pull strokes - so you dont have to work so hard.

Hardpoint tenon saw with soft-grip handle for user comfort.

The ideal choice for fine carpentry and can be used with a mitre box.

Size: 250mm (10 in)
Teeth 12 tpi.

The DEWALT Cordless Extreme Framing Circular Saw Blade has a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage.

Suitable for ripping and cross-cutting natural timbers and cutting composite wood based sheet materials e.g. Plywood, MDF and chipboard. NOT recommended for timbers that contains nails.

The DEWALT DT10624QZ Cordless Extreme Framing Circular Saw Blade has the following specifications:

Blade Diameter: 165mm.
Bore Size: 20mm.
Tooth Count: 24.

The Stanley Dual Temp melt, all-purpose glue Sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements.

Use the low setting for bonding paper and heat sensitive products, and the high setting for china, leather etc. (non-porous products).

The Stanley STA1GS20DT Dual Temp Glue Sticks 100mm (4 inch) comes in a pack of 24.

These Faithfull mitre blocks are made from high-quality European beech, the sides and bases are glued and screwed together to provide extra strength and durability.

With accurate slots for cutting 45° or 90° angles, they are designed for use with tenon or backsaws.

Ideal for use when cutting picture frame joints and general carpentry work.

Block Length: 300mm (12in)

Block Width: 64mm (2.1/2in)

Blackedge Carpenter's Pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain.

Available in 3 grades:

Green (hard): for hardwoods, brickwork and plastered walls.
Red (medium): for general carpentry.
Blue (soft): for softwoods and newly felled timber.

Blackedge Carpenter's Pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain.

Available in 3 grades:

Green (hard): for hardwoods, brickwork and plastered walls.
Red (medium): for general carpentry.
Blue (soft): for softwoods and newly felled timber.

Blackedge Carpenter's Pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain.

Available in 3 grades:

Green (hard): for hardwoods, brickwork and plastered walls.
Red (medium): for general carpentry.
Blue (soft): for softwoods and newly felled timber.

Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.

Size 75mm (3 in)

This fully adjustable Block Plane has a body made from fine grey iron which is precision machined. It is fully adjustable for depth of cut, cutter alignment and size of mouth.
It is ideal for end grain and general-purpose fine finishing work and comes with a pouch for convenient storage. The precision carbon alloy steel blade is 40mm wide.

Cutter seats at 21 degrees.

Length: 6.1/4in.
Cutter width: 1.5/8in.

This Stanley Adjustable Quick Square has a black body with yellow graduations providing maximum readability in all light conditions. It features the Common Jack and Hip and Valley scales.
This square has a heavy-duty construction, and it is multipurpose with an adjustable design which means it can be used as a rafter square, saw guide.

Specification:

Size: 170mm (6.3/4in).

Stanley 8 or 9 Piece Folding Hexagon Key Set with a bi-material grip for increased comfort and a chamfered tip to aid location. With a phosphate finish for corrosion protection.

The 2-69-265 is a 9 piece imperial set comprising of the following:

5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32 and 1/4in.

Stanley Hex Key Set manufactured from High Tensile steel for strength and resilience.

Comes in folding open case.

Set of 8 Keys.

Teh 0-69-252 Imperial set has the followng sizes:

1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4in.

Stanley Hex Key Set manufactured from High Tensile steel for strength and resilience.

Comes in folding open case.

Set of 8 Keys.

The 0-69-251 Metric set has the following sizes: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm.

Stanley 8 Piece TORX Key Folding Set with a bi-material grip for increased comfort. Chamfered tip to aid location. Phosphate finish for corrosion protection.

Sizes: TX9, TX10, TX15, TX20, TX25, TX27, TX30, TX40.

Stanley 8 or 9 Piece Folding Hexagon Key Set with a bi-material grip for increased comfort and a chamfered tip to aid location. With a phosphate finish for corrosion protection.

The Stanley 2-69-264 is a 8-piece metric set comprising of the following:

1.5, 2, 2.5, 3, 4, 5, 6 and 8mm.

This Stanley Magnetic Bit Holder has been precision machined. The magnetic recess holds 1/4in insert bits securely when in use.

Sold singularly or as a box of 5 bits.

Length: 60mm

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140.

Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.

1 x Pack of 1000 Stanley TRA709T Heavy-Duty Staples 14mm

The Stanley Precision Moulding Pry Bars are manufactured from forged and tempered high-carbon steel for safety and long life. With polished bevel claws, one has a wide flat surface to cleanly pry moulding and trim, thus reducing material damage. The contoured bar makes pulling, prying and lifting easier

1 x Stanley Precision Moulding Pry Bar 250mm (10in)

The Stanley FatMax® Pozidriv Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws. The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.

Stanley FatMax® VDE Insulated Screwdriver Pozidriv Tip has the following specification:.

Tip Size: PZ0.
Blade Length: 75mm (3in).

The Stanley FatMax® Phillips Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws.

The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.

Stanley FatMax® VDE Insulated Screwdriver Phillips Tip has the following specification:.

Tip Size: PH2.
Blade Length: 125mm (5in).

The Stanley FatMax® Phillips Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws.

The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.

Stanley FatMax® VDE Insulated Screwdriver Phillips Tip has the following specification:.

Tip Size: PH0.
Blade Length: 75mm (3in).

The Stanley FatMax® Parallel Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws.

The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.

Stanley FatMax® VDE Insulated Screwdriver Parallel Tip has the following specification:.

Tip Size: 5.5mm.
Blade Length: 150mm (6in).

The Stanley FatMax® Parallel Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws.

The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.

Stanley FatMax® VDE Insulated Screwdriver Parallel Tip has the following specification:.

Tip Size: 4.0mm.
Blade Length: 100mm (4in).

The Stanley FatMax® Parallel Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws.

The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.

Stanley FatMax® VDE Insulated Screwdriver Parallel Tip has the following specification:.

Tip Size: 3.5mm.
Blade Length: 75mm (3in).

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140.

Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.

1 x Pack of 1000 Stanley TRA708T Heavy-Duty Staples 12mm

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140.

Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.

1 x Pack of 1000 Stanley TRA706T Heavy-Duty Staple 10mm

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140.

Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.

1 x Pack of 1000 Stanley TRA705T Heavy-Duty Staple 8mm

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140.

Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.

1 x Pack of 1000 Stanley TRA704T Heavy-Duty Staples 6mm

The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability.

The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.

Type - Pozidriv
Tip Size PZ.2
Blade Length 250mm (10 in)

The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability.

The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.

Type - Flared
Tip Size 10.0mm
Blade Length 200mm (8 in)

The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability.

The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.

Type - Pozidriv
Tip Size PZ.3
Blade Length 150mm (6 in)

The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability.

The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.

Type - Pozidriv
Tip Size PZ.2
Blade Length 125mm (5 in)

The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability.

The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.

Type - Pozidriv
Tip Size PZ.1
Blade Length 100mm (4 in)

The Stanley FatMax® Phillips Tip Screwdrivers have a chrome vanadium steel bar that allows high torque and reduces the risk of tip breakage. The handle is moulded directly to the shaft for a virtually unbreakable bond, which gives long life and durability.

The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour-coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action, and the large diameter handle offers higher torque when driving wood screws.

Type: Phillips
Tip Size: PH1
Blade Length: 100mm (4in)

The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability.

The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.

Type - Flared
Tip Size 5.5mm
Blade Length 100mm (4 in)

The Stanley FatMax® Parallel tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to shaft for a virtually unbreakable bond which gives long life and durability.

The soft grip handle provides great grip and reduced fatigue in use. Colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.

Parallel tips are ideal if the screw needs to be driven below the material surface.

Type - Parallel
Tip Size 4.0mm
Blade Length 100mm (4 in)

The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability.

The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.

Type - Flared
Tip Size 4.0mm
Blade Length 100mm (4 in)

The Stanley FatMax® Parallel tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to shaft for a virtually unbreakable bond which gives long life and durability.

The soft grip handle provides great grip and reduced fatigue in use. Colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.

Parallel tips are ideal if the screw needs to be driven below the material surface.

Type - Parallel
Tip Size 3.5mm
Blade Length 75mm (3 in)

The Stanley FatMax® Parallel tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability.

The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.

Parallel tips are ideal if the screw needs to be driven below the material surface.

Type - Parallel
Tip Size 6.5mm
Blade Length 30mm (1 3/16 in).

The Stanley FatMax® Parallel tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability.

The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.

Parallel tips are ideal if the screw needs to be driven below the material surface.

Type - Parallel
Tip Size 5.5mm
Blade Length 30mm (1 3/16 in)

The Stanley 0TR250 Heavy-Duty Staple & Nail Gun is fitted with an easy push handle penetrating the staple or nail into the workpiece with ease. The pinch point free design helps to protect cables so they do not to get crushed on application.
This Stanley gun has an aluminium cast housing for greater durability and strength, is fitted with Hi/Lo adjustment to match density of materials and has easy access staple and brad insertion for faster loading.
This staple and nail gun has a lock down handle system fitted for easy storage. It will accept heavy-duty staples and brads for multiple applications from cable laying, upholstery work, fencing, architrave fitting and much more.

It will fire - STANLEY® Type-G staples in 6mm (1-TRA704T), 8mm (1-TRA705T), 10mm (1-TRA706T), 12mm (1-TRA708T) and 14mm (1-TRA709T) and STANLEY® Type-J Headed Brad Pins in 12mm (1-SWK-BN050T) and 15mm (1-SWK-BN625T).

Type 53 light-duty staple.

Fit Stanley: TR40, TR45, 69-721, 69-701, 69-702, 69-720, 69-721, ST10, ST14, FMHT0-80550 and FMHT81394-9 staplers and hammer tacker.

Size: 10mm

Qty: 1000

Type 53 light-duty staple.

Fit Stanley: TR40, TR45, 69-721, 69-701, 69-702, 69-720, 69-721, ST10, ST14, FMHT0-80550 and FMHT81394-9 staplers and hammer tacker.

Size: 8mm

Qty: 1000

Type 53 light-duty staple.

Fit Stanley: TR40, TR45, 69-721, 69-701, 69-702, 69-720, 69-721, ST10, ST14, FMHT0-80550 and FMHT81394-9 staplers and hammer tacker.

Size: 6mm

Qty: 1000

The Stanley FatMax® VDE Insulated Voltage Tester has an insulated plastic handle for complete safety. Its blade is made from chrome vanadium steel for long life.

Tip: Parallel 3 x 65mm.

The Stanley Tylon™ Pocket Tape has a corrosion resistant, long-life Tylon™ coated blade with positive blade lock for accurate measurements. Shows both metric and imperial graduations. Fitted with a Tru-zero hook, that compensates accurately for internal and external measurements, with triple rivet construction for improved strength and durability. The impact resistant ABS plastic case is fitted with an ergonomic overmould for all day comfort.

This Stanley Tylon™ Pocket Tape has metric and imperial graduations, and is supplied Carded.

Blade Length: 3m/10ft
Blade Width: 12.7mm
Accuracy: EC Class II

The Stanley PowerLock® Classic Pocket Tape has a Mylar® coated steel blade that is up to 10 times more resistant to abrasion than normal lacquered blades. Tipped by a super-strong 3 rivet, automatically adjustable, tru-zero end hook. Supplied in a high-impact, chrome plated ABS plastic case with a smooth, quick-grab autolocking mechanism and a conventional steel belt clip.

Available with metric only or metric and imperial graduations.

This Stanley PowerLock® Classic Pocket Tape has metric and imperial graduations.

Blade Length: 5m/16ft
Blade Width: 19mm
Accuracy: EC Class II

The Stanley Mole grips are a Straight Jaw Mole Grip which is suitable for gripping a wide variety of objects. The forged and machined jaws offer a maximum durability and the body is chrome plated to resist corrosion.

The knurled screw at the base of the handle adjusts the clamping pressure and the non-pinching pull jaw release lever improves safety and ease of opening.

These Stanley Tools Straight Jaw Locking Pliers have the following specification:

Length: 229mm (9in).

The Stanley MaxSteel adjustable wrenches have a narrow head design for limited space applications and Laser-marked SAE and metric jaw scale for easy fastener size. The forged alloy-steel body increases strength and the extra wide jaw capacity opens wider than standard adjustable wrenches.

They have a bi-material handle for a comfortable grip. Ideal for automotive maintenance and repair, plumbing and general assembly tasks.

Stanley STA090950 Adjustable Wrench 300mm.

Size: 300mm (12 in).
Jaw capacity: 39mm.

The Stanley MaxSteel adjustable wrenches have a narrow head design for limited space applications and Laser-marked SAE and metric jaw scale for easy fastener size. The forged alloy-steel body increases strength and the extra wide jaw capacity opens wider than standard adjustable wrenches.

They have a bi-material handle for a comfortable grip. Ideal for automotive maintenance and repair, plumbing and general assembly tasks.

Stanley STA090949 Adjustable Wrench.

Size: 250mm (10 in).
Jaw capacity: 33mm.

The Stanley MaxSteel adjustable wrenches have a narrow head design for limited space applications and Laser-marked SAE and metric jaw scale for easy fastener size. The forged alloy-steel body increases strength and the extra wide jaw capacity opens wider than standard adjustable wrenches.

They have a bi-material handle for a comfortable grip. Ideal for automotive maintenance and repair, plumbing and general assembly tasks.

Stanley STA090947 Adjustable Wrench.

Size: 150mm (6 in).
Jaw capacity: 24mm.

This Stanley Combination Square has a precision die cast body with 3 precision machined faces for accuracy. It can be used as a try and mitre square, depth and height gauge and spirit level and it has a 360-degree vial for all round visibility.
The steel blade is etched with metric and imperial graduations, and coated for high visibility and is rust resistant. It has a high-quality brass nut and scriber fittings for long life.

Specification:

Size: 300mm.

The Stanley DynaGrip™ Nail Punch is induction heat treated for safety and improved performance. With a cupped tip for easy alignment. Its long length allows for setting nails in hard to reach places. Fitted with a over-moulded DynaGrip™ grip, to help dampen vibrations and reduce slipping during use. The grip is colour coded by tip size for easy identification.

Used for driving finish nails beneath trim work.

This set of 3 punches contains the following tip sizes:
1/32in (0.8mm) Yellow Sleeve
1/16in (1.6mm) Grey Sleeve
3/32in (2.4mm) Red Sleeve

Overall Length: 125 mm / 5in

A patented cam lock clamping feature secures workpiece for easy accurate cutting. A built-in saw stop prevents cutting into the mitre box.

The mitre box has 90° and 45° mitre slots as well as 22.5° slots for octagon shapes and is of a one piece injection moulded design for extra strength.

Available with or without a fine tooth tenon saw.

Comes complete with Tenon Saw (Fine Tooth).

Size: 310 x 130mm

Maximum depth of cut: 80mm

Junior Hacksaw with square steel frame, moulded grip handle and lower blade tensioner. A lever is incorporated in the handle enabling easy and rapid blade changing. Deep throat for good work capacity.
Spare blade included.

Blade length: 150mm (6in).

The three cutting surfaces of the Combination Shave Hook are shaped to aid the removal of paint from both flat or contoured surfaces. Fitted with a DYNAGRIP™ handle.

The curved claw head is made from forged, heat-treated steel and the oval tubular steel shaft combines strength with a lightweight feel.
The flock filled vinyl grips are impervious to heat, oil and most solvents.

Weight 567g (1 1/4 lb)

The curved claw head is made from forged, heat-treated steel and the oval tubular steel shaft combines strength with a lightweight feel.
The flock filled vinyl grips are impervious to heat, oil and most solvents.

Weight: 454g (1 lb).

These Stanley Spare Blades are to fit the Stanley Junior Hacksaw.

The Stanley Open Reel Fibreglass Tape has a 13mm wide, durable fibreglass blade with easy to read markings in both metric and imperial graduations. The blade is non-corrosive, printed on both sides for easier reading and resists fading.

Its high-visibility yellow ABS case makes it easy to find on the job site and there is a bi-material grip for comfort. The folding rewind crank with rotating fingertip knob makes blade rewind smoother and easier.

This Stanley Open Reel Fibreglass Tape has both metric and imperial graduations.

Blade Length: 30m/100ft
Blade Width: 13mm
Accuracy: EC Class III

This Stanley Chalk Line has an ergonomic design, with a high impact ABS case for durability. It has an on-board hook storage, a crank which folds into a case for storage and a sliding door which allows for quick and easy refill (30g. Chalk Capacity).
It has a stainless steel end hook for added durability and rust prevention, and can hold 30m of string.

Supplied with 113g blue chalk and line level.

Stanley Aluminium Rivets - Available in short, medium and long lengths.

Stanley Aluminium Rivets - Available in short, medium and long lengths.

Stanley Aluminium Rivets - Available in short, medium and long lengths.

Stanley Aluminium Rivets - Available in short, medium and long lengths.

Stanley Aluminium Rivets - Available in short, medium and long lengths.

Stanley Aluminium Rivets - Available in short, medium and long lengths.

Stanley Aluminium Rivets - Available in short, medium and long lengths.

The Stanley MR77 all-steel riveter has a head that rotates 360° for use at any angle. It has 4 nosepieces and a wrench store in its handle for versatility and convenient storage.

It accepts 3, 4, and 5mm aluminium and steel rivets for a wide range of applications.

The Stanley Surform® Round File is useful for wood turning and wood sculpture. Also for enlarging holes in wood and smooth concave surfaces. There is a thumb grip at one end and a polypropylene handle at the other to provide more control when in use. It is supplied with a 250mm (10in) blade.

Overall Length: 400mm (16in).

The Stanley Heavy-Duty Glue Gun with convenient fold down stand for use between applications. Uses dual melt 11.3mm glue sticks for full range of materials, and has a high/low melt switch.

Input Power: 25W.
Glue Sticks: 11.3mm Dual Melt.

The Stanley Dual Temp melt, all-purpose glue Sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements.

Use the low setting for bonding paper and heat sensitive products, and the high setting for china, leather etc. (non-porous products).

The STA1GS10DT Dual Temp Glue Sticks have the following specifications:

Length: 100mm (4 inches).
Diameter: 7mm.

Pack of 24.

The Stanley Dual Temp melt, all-purpose glue Sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements.

Use the low setting for bonding paper and heat sensitive products, and the high setting for china, leather etc. (non-porous products).

The Stanley STA1GS20DT Dual Temp Glue Sticks 100mm (4 inch) comes in a pack of 24.

This Stanley Line Level 042287 is used for setting out levels over large areas where precision is of secondary importance e.g., ideal for landscape gardening.
It has a lightweight metal body for long life and includes hooks for using on string.

The Stanley Moulded Body Surform® Block Plane for use on all types of wood, aluminium, copper, plastics and laminates. The blade is reversible for bull nose work, and it has a lightweight plastic moulded body with a thumb screw for quick release. Fitted with a 140mm (5.1/2in) fine cut blade. The blade can be changed without the use of additional tools.

This 60 1/2 Block Plane features a low angle cutter seat at 13.5° and is fully adjustable for depth-of-cut, cutter alignment and size of mouth. The body is made from a fine grey iron.
Particularly effective on end grain and plastic laminates.
Supplied with a pouch for convenient storage.

Cutter Width: 35mm.
Length: 150mm (6in).

Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.