Tools & Site Equipment

The IRWIN Jack Universal 880 Triple Ground Hardpoint Saw is fitted with a high-quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster-cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing 4X the added protection than conventional anti-rust agents.

The handle is a proven design, light and strong with an ultrasonic welded soft grip for increased hold and enhanced comfort. 90° and 45° angles integrated in the handle aid the user when marking out.

The Irwin Jack JAK880UN20 880 UN Universal Panel Saw comes with the following specification:

Length: 500mm (20in)
Teeth: 8 TPI

IRWIN Jack Hardpoint fleam toothed crosscut handsaw with soft grip for user comfort. The ideal jobbing builders saw.

The Jack Irwin JAK770UHP550 770UHP-550 Hardpoint Soft Grip Handsaw comes with the following specifications:
Blade Length: 550mm (22 inch).
Teeth: 7 TPI

Irwin Jack Fine Handsaw with a soft grip for user comfort. The fine toothing gives a superior finish. Ideal for cutting plywood, chipboard and other man-made materials.

The Jack Irwin JAK990UHP550 990UHP-550 Soft Grip Handsaw comes with the following specifications:
Blade Length: 550mm (22 inch).
Teeth: 9 TPI.

IRWIN Jack Xpert Pro Light Concrete Saw with specially designed large teeth for cutting cellular concrete. The 1mm thick high quality steel blade ensures maximum stability and power transfer. Xpert soft-grip handle provides a positive, lightweight but durable grip, even during prolonged use. 45° and 90° angles on the handle which are useful for marking.

Length 700mm (28 in)
Hardpoint Teeth 2 tpi

The IRWIN Jack 880UN Universal Toolbox Saw has all the features and benefits of a standard Jack 880, with the convenience of a 14in 'short' blade. The saw is fitted with a high quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing four times the added protection than conventional anti-rust agents.

The handle has integrated 90° and 45° angles to aid the user when marking out.

Blade Length: 350mm (14 inch).
Teeth: 8 TPI.

This Faithfull Aluminium Triangular Scale Rule is graduated with six different scales for precision drawing. (1:20, 1:25, 1:50, 1:75, 1:100, and 1:125). The graduations are clear and easy to read.
The unique triangular profile keeps fingers well away from any knife edge when used for cutting or scoring card etc.

Specification:

Length: 300mm (12 in).

Faithfull Twisted Nylon Chalk Lines are ideal for most applications in the building trade and can be used as chalk or brick lines.

Used with coloured powdered chalk to mark between two points to give a straight line.

Twisted nylon line is cheaper than braided.

To stop the line fraying at the end hold over a lighted match for a few seconds to melt and weld the ends together.

Length: 36 metres

This Faithfull heavy steel bodied plumb bob has a pointed end to assist when marking out and is available in two weights. A centre and cross hole fixing system permit a line to be attached through the centre line of the bob helping to provide an accurate centre reading.

The plumb bob is a simple to use, essential tool for establishing a vertical or plumb line when carrying out building, decorating and many other projects where an accurate vertical line is required.

Weight: 140g (5oz).

Orange polyethylene ranging line is heavier gauge than the brick line and is commonly used for marking out ground on building sites.

Length: 30 metres

Type: Orange Polyethylene

The Faithfull Double Scaffold Spanner Holder is made to a high specification using quality heavy-duty hide. This Faithfull holder is made to last and provide dependable service.
It has two loops for scaffold spanners or socket bars, the holder will fit most belts.

Specification:

Size: 150 x 100mm (6 x 4in).

Mixing paddles have a robust construction for heavy-duty work. They are great for mixing plaster, render, paint, adhesives, mortar, paste and screed. Use with 13mm (1/2 inch) capacity chuck power drills of at least 600 watt.

Size: 600 x 100mm.
For 10-20Kg.

Mixing paddles have a robust construction for heavy-duty work. They are great for mixing plaster, render, paint, adhesives, mortar, paste and screed. Use with 13mm (1/2 inch) capacity chuck power drills of at least 600 watt.

Size: 400 mm x 80mm.
For 5-10Kg.

The Marshalltown 26BH-X Swivel Pole Sander Head is made from lightweight, reinforced die-cast aluminium and bonded to a foam rubber pad for extra durability. Fitted with quick-change locking clamps for quicker sandpaper replacement. Ideal for sanding drywall joints.

Specification:

Size: 240 x 83mm (9.3/8 x 3.1/4in)

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

5 Piece Lip & Spur Wood Drill Bit Set, these are the preferred cutting tip design for drilling wood, these alloy steel drills have a steeper twist and a deeper flute than HSS bits, for rapid clearance of waste. They are ideal for use in dowelling jigs.

Sizes: 4, 5, 6, 8 and 10mm.

4mm: Working Length: 43mm, Overall Length: 75mm.
5mm: Working Length: 50mm, Overall Length: 85mm.
6mm: Working Length: 52mm, Overall Length: 92mm.
8mm: Working Length: 75mm, Overall Length: 120mm.
10mm: Working Length: 80mm, Overall Length: 130mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 10mm.
Working Length: 80mm.
Overall Length: 130mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 8mm.
Working Length: 75mm.
Overall Length: 120mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 6mm.
Working Length: 52mm.
Overall Length: 92mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 5mm.
Working Length: 50mm.
Overall Length: 85mm.

Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depressed centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications.

Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs with a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications.

Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work
Don't use Depressed Centre cutting discs as grinding wheels

Roughneck Brick Hammer manufactured from drop forged alloy steel, hardened and tempered and with a fully polished head. The tubular steel handle has a strong head to shaft connection.

The ergonomically designed grip is riveted to the handle for additional safety. Unique treble injected TPR soft grip handle for comfort during use and to reduce fatigue.

RTR101 DIY Philadelphia pattern pointing trowels with a hardened and tempered steel blade and soft touch handle.

Soft touch handle

Size 150mm (6 in).

This R.S.T. London Pattern Brick Trowel has a durable hardened steel blade. Its handle is soft-touch to enhance user comfort.

The traditional London pattern is the standard shape for laying bricks.

Size: 250mm (10 inch).

This 2-in-1 plastic funnel features a brass filter to prevent the ingress of unwanted matter and a 13in detachable flexible nylon spout.

Faithfull Lightweight Aviation Tinsnips manufactured to a high specification which includes a safety locking latch, strong opening spring and slip guards for protection on each handle.

Designed to cut up to 1. 2mm sheet steel, non-ferrous material, vinyls, plastic and rubber. Formed blades in satin finish are serrated to prevent sheet metal slipping.

Specification

Length: 250mm (10in).
Cutting Capacity: Sheet Steel: 1.2mm.

These Faithfull ;Compound Aviation Snips ;have the following specification:

Cut Type: Straight.
Length: 250mm (10in).
Cutting Capacity: Sheet Steel: 1.2mm.

Plier action roof slate tile cutter with spring loaded handles. This model also has a slate hole punch which operates by closing the handles. Approx length: 300 mm /12in.

Features:

Replaceable blade and punch.

Punch diameter: 3.2 mm (1/8in).

Cutting length: 35 mm per single pressure.

Cutting width: 2.8 mm (0.109in).

The Faithfull general-purpose Club Hammer with precision ground striking faces specially hardened and heat treated to withstand the most high-impact heavy applications.
Fitted with a fibreglass handle, with a rubber grip.

1 x Faithfull Club Hammer Fibreglass Handled 1.81kg (4 lb).

The Faithfull general-purpose Club Hammer with precision ground striking faces specially hardened and heat treated to withstand the most high-impact heavy applications.
Fitted with a fibreglass handle, with a rubber grip.

1 x Faithfull Club Hammer Fibreglass Handled 1.13kg (2.1/2 lb).

These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights.

The malleable iron head is fitted with one hide and one copper face on a polished wooden handle.

(No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)

Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.

Size: 2
Weight 1070g (2.1/2lb).
Diameter 38mm (1.1/2in).

Faithfull Slaters Ripper for sliding under slates to pull out or sheer off fixing nails prior to replacing with new slates. Features a flexible steel blade with PVC grip.

This Marshalltown Mason's Line is made from twisted nylon that has been heat set after winding to increase stability. Not affected by mortar, oil or mildew and will not absorb water.

Suitable for staking out sites, concrete and landscaping layout and brick/block laying.

Made in the U.S.A

1 x Marshalltown M631 Mason's Line 76.2m (250ft) - Fluorescent Pink.

The Marshalltown M48D gauging trowel solid forged from high grade tool steel and carefully taper ground and polished. Used primarily for measuring, mixing and applying small quantities of cement. The DuraSoft® handle provides a soft feel, reduces fatigue and offers excellent durability.

Size: 180 x 86mm (7 x 3.3/8in).

Universal Tool that can be used for pointing or cementing any small scale brickwork. It has a trowel profile at one end and a squared profile at the other.

Made from high carbon steel.

Size 19 x 265mm (3/4 x 10 1/2 in)

Universal Tool that can be used for pointing or cementing any small scale brickwork. It has a trowel profile at one end and a squared profile at the other.

Made from high carbon steel.

Size 16 x 265mm (5/8 x 10 1/2 in)

Universal Tool that can be used for pointing or cementing any small scale brickwork. It has a trowel profile at one end and a squared profile at the other.

Made from high carbon steel.

Size 12mm x 265mm (1/2 in x 10 1/2 in)

This R.S.T. Margin Trowel has a carbon steel blade and metal tang. Primarily used to tidy cement and plaster edges.

For comfortable use, the trowel has a Soft Touch handle.

Size: 130 x 40mm (5.1/2 x 1.1/2in)

R.S.T. gauging trowel with a carbon steel blade and soft touch handle. Used primarily for mixing and applying small quantities of cement.

Size: 180mm (7in).

This RST bucket trowel has a blade manufactured from carbon steel. This tool is primarily used for mixing or 'gauging' small quantities of plaster, sand & cement. Its rounded corners make cleaning of buckets easy. It is fitted with a soft touch handle.

Size: 180mm (7in).

Faithfull edging trowels are commonly use to apply a rounded finished edge to concrete and render. The carbon steel blade with one long curved edge is fitted with a full sized soft grip handle for user comfort.

Size: 280 x 120mm (11 x 4.3/4in).

R.S.T. Notched trowel has a strong, durable all steel blade with square notches and is ideal for applying adhesive to walls and floors prior to applying tiles.

The trowel has a steel ferrule and tang, and a soft touch handle for user comfort.

Size: 280 x 115mm (11 x 4 1/2 in).

R.S.T. Taping Knife with a blued steel blade. Suitable for drywall lining. Fitted with a soft touch handle for increased user comfort.

The blade is made from blued steel.

Size: 200mm (8 inch).

This R.S.T. Plasterers finishing trowel has a strong and durable carbon steel blade, which is fixed with invisible rivets. Finishing trowels are used in smoothing and finishing the surface of plaster. They help to compact the surface and add to the quality and durability of the work.

Size: 280 x 115mm (11 x 4.1/2in).

Fitted with a banana shaped wooden handle.

The R.S.T. Drywall Putty Knife with a soft touch handle for increased user comfort. Available with stiff or flexible blades up to 150mm/6in wide.

Flexible blade.

Size: 10.2cm (4 inch).

The R.S.T. Drywall Putty Knife with a soft touch handle for increased user comfort. Available with stiff or flexible blades up to 150mm/6in wide.

Flexible blade.

Size: 15.2cm (6 inch).

This R.S.T. Scarifier is used for scratching plaster undercoat. It has a blue steel blade and its soft touch handle increases user comfort.

Size: 200mm (8 inch).

R.S.T. Taping Knife with a blued steel blade. Suitable for drywall lining. Fitted with a soft touch handle for increased user comfort.

The blade is made from blued steel.

This sturdy float is a lightweight one piece polyurethane moulding. The pattern face is non-absorbent and is used for applying plaster, cement and other building materials.

Small Float Size: 280 x 110mm (11 x 4 1/4 in)

This sturdy float is a lightweight one piece polyurethane moulding. The pattern face is non-absorbent and is used for applying plaster, cement and other building materials.

Large Float Size: 350 x 150mm (14 x 6in)

Ragni small trowel with a flexible 8 x 3in steel blade. It has a comfortable, soft grip handle and is ideal for use in narrow places which are inaccessible to a standard size trowel.

The Footprint 620 Line Pins are made from drop-forged, hardened steel with a chrome plated finish. Designed for use when building a wall. Use in conjunction with a length of nylon cord or builder's string to make sure that a course of bricks is straight and true.

Length: 160mm (6.1/4in).

2 x Footprint 620 Line Pins.

Universal Plunger

Builds up pressure of water which forces the obstruction clear.

Size 100mm (4 in)

Universal Drop Scraper which glides over small obstructions and drops into a vertical scraping position to allow offending material to be dragged back towards the operator.

Size: 4 in.

Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.

Size 150mm (6 in)

The Wagner Fence & Decking Sprayer is the quickest, easiest way to apply wood treatment in your garden. It will coat all types of wooden fences, sheds, decking or garden furniture for better looking, longer lasting surface protection. The gun is detachable, allowing easy change of attachment, paint, refill or to clean the gun. It has an extra fine atomisation for uniform paint coverage with a single coat. With 3 paint jet settings for horizontal, vertical or detailed spraying. The paint flow is fully adjustable for precision painting.

Suitable for all standard solvent or water-based fence paint, oil, stain, varnish, wood preservatives and treatment. No need for specialist sprayable paint.

"Advanced high adhesion, dual-sided, textured 'scrub & clean' wipes that quickly & effectively capture & remove a wide variety of construction and maintenance muck & grime such as; PU expanding foam, silicone, acrylic sealants, epoxy fillers, solvent based paints, adhesives, grease, gap fill, oil & much more from hands, tools & surfaces. 100% Biodegradable, made from wood pulp fibres from FSC approved forests Non-bleach, no dye, super-soft fabric is exceptionally absorbent Ideal for cleaning surfaces (counters, worktops, window frames/sills, cabinets/casing, tiles, flooring) as they effectively soak up unwanted leftover dirt & grime to leave any job looking clean and professional Certified antiviral (EN14476) & antibacterial (EN1276) Big Wipes clean AND disinfect to protect you, your colleagues and your customers and keep your workspace and equipment sanitised Dermatologically tested with FOUR skin conditioners to protect & nourish hands, ideal for tradespeople on the move Free of artificial preservatives, parabens & sulphates Non toxic, hazardous & flammable Biodegradable"

Big Wipes Heavy-Duty have a high-performance, dual-sided, textured 'scrub & clean' fabric to quickly and effectively 'grab & remove' even the most stubborn muck and grime. These Heavy-Duty wipes don't mess around easily removing paint, oil, PU foam, silicone, grease, gap fill, adhesive and more from hands, tools & surfaces.

Certified antiviral (EN14476) & antibacterial (EN1276) Big Wipes clean AND disinfect to protect you, your colleagues and your customers and keep your workspace and equipment sanitised

The IRWIN Jack Xpert range of handsaws have evolved into super-efficient cutting tools that have University verified technology at their heart. This triple-ground tooth technology (TGT) not only increases efficiency but also optimises cutting performance on both the push and pull strokes - so you dont have to work so hard.

Hardpoint tenon saw with soft-grip handle for user comfort.

The ideal choice for fine carpentry and can be used with a mitre box.

Size: 250mm (10 in)
Teeth 12 tpi.

The DEWALT Cordless Extreme Framing Circular Saw Blade has a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage.

Suitable for ripping and cross-cutting natural timbers and cutting composite wood based sheet materials e.g. Plywood, MDF and chipboard. NOT recommended for timbers that contains nails.

The DEWALT DT10624QZ Cordless Extreme Framing Circular Saw Blade has the following specifications:

Blade Diameter: 165mm.
Bore Size: 20mm.
Tooth Count: 24.

The Stanley Dual Temp melt, all-purpose glue Sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements.

Use the low setting for bonding paper and heat sensitive products, and the high setting for china, leather etc. (non-porous products).

The Stanley STA1GS20DT Dual Temp Glue Sticks 100mm (4 inch) comes in a pack of 24.

These Faithfull mitre blocks are made from high-quality European beech, the sides and bases are glued and screwed together to provide extra strength and durability.

With accurate slots for cutting 45° or 90° angles, they are designed for use with tenon or backsaws.

Ideal for use when cutting picture frame joints and general carpentry work.

Block Length: 300mm (12in)

Block Width: 64mm (2.1/2in)

Blackedge Carpenter's Pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain.

Available in 3 grades:

Green (hard): for hardwoods, brickwork and plastered walls.
Red (medium): for general carpentry.
Blue (soft): for softwoods and newly felled timber.

Blackedge Carpenter's Pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain.

Available in 3 grades:

Green (hard): for hardwoods, brickwork and plastered walls.
Red (medium): for general carpentry.
Blue (soft): for softwoods and newly felled timber.

Blackedge Carpenter's Pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain.

Available in 3 grades:

Green (hard): for hardwoods, brickwork and plastered walls.
Red (medium): for general carpentry.
Blue (soft): for softwoods and newly felled timber.

Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.

Size 75mm (3 in)

This fully adjustable Block Plane has a body made from fine grey iron which is precision machined. It is fully adjustable for depth of cut, cutter alignment and size of mouth.
It is ideal for end grain and general-purpose fine finishing work and comes with a pouch for convenient storage. The precision carbon alloy steel blade is 40mm wide.

Cutter seats at 21 degrees.

Length: 6.1/4in.
Cutter width: 1.5/8in.

This Stanley Adjustable Quick Square has a black body with yellow graduations providing maximum readability in all light conditions. It features the Common Jack and Hip and Valley scales.
This square has a heavy-duty construction, and it is multipurpose with an adjustable design which means it can be used as a rafter square, saw guide.

Specification:

Size: 170mm (6.3/4in).

Stanley 8 or 9 Piece Folding Hexagon Key Set with a bi-material grip for increased comfort and a chamfered tip to aid location. With a phosphate finish for corrosion protection.

The 2-69-265 is a 9 piece imperial set comprising of the following:

5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32 and 1/4in.

Stanley Hex Key Set manufactured from High Tensile steel for strength and resilience.

Comes in folding open case.

Set of 8 Keys.

Teh 0-69-252 Imperial set has the followng sizes:

1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4in.

Stanley Hex Key Set manufactured from High Tensile steel for strength and resilience.

Comes in folding open case.

Set of 8 Keys.

The 0-69-251 Metric set has the following sizes: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm.

Stanley 8 Piece TORX Key Folding Set with a bi-material grip for increased comfort. Chamfered tip to aid location. Phosphate finish for corrosion protection.

Sizes: TX9, TX10, TX15, TX20, TX25, TX27, TX30, TX40.

Stanley 8 or 9 Piece Folding Hexagon Key Set with a bi-material grip for increased comfort and a chamfered tip to aid location. With a phosphate finish for corrosion protection.

The Stanley 2-69-264 is a 8-piece metric set comprising of the following:

1.5, 2, 2.5, 3, 4, 5, 6 and 8mm.

This Stanley Magnetic Bit Holder has been precision machined. The magnetic recess holds 1/4in insert bits securely when in use.

Sold singularly or as a box of 5 bits.

Length: 60mm

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140.

Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.

1 x Pack of 1000 Stanley TRA709T Heavy-Duty Staples 14mm

The Stanley Precision Moulding Pry Bars are manufactured from forged and tempered high-carbon steel for safety and long life. With polished bevel claws, one has a wide flat surface to cleanly pry moulding and trim, thus reducing material damage. The contoured bar makes pulling, prying and lifting easier

1 x Stanley Precision Moulding Pry Bar 250mm (10in)

The Stanley FatMax® Pozidriv Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws. The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.

Stanley FatMax® VDE Insulated Screwdriver Pozidriv Tip has the following specification:.

Tip Size: PZ0.
Blade Length: 75mm (3in).

The Stanley FatMax® Phillips Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws.

The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.

Stanley FatMax® VDE Insulated Screwdriver Phillips Tip has the following specification:.

Tip Size: PH2.
Blade Length: 125mm (5in).

The Stanley FatMax® Phillips Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws.

The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.

Stanley FatMax® VDE Insulated Screwdriver Phillips Tip has the following specification:.

Tip Size: PH0.
Blade Length: 75mm (3in).

The Stanley FatMax® Parallel Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws.

The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.

Stanley FatMax® VDE Insulated Screwdriver Parallel Tip has the following specification:.

Tip Size: 5.5mm.
Blade Length: 150mm (6in).

The Stanley FatMax® Parallel Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws.

The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.

Stanley FatMax® VDE Insulated Screwdriver Parallel Tip has the following specification:.

Tip Size: 4.0mm.
Blade Length: 100mm (4in).

The Stanley FatMax® Parallel Tip VDE Insulated Screwdrivers have a VDE insulated screwdriver tip that is individually tested to 10,000 volts and guaranteed to 1,000 volts. The soft grip handle gives the perfect combination of great grip plus reduced fatigue and its large diameter offers greater torque needed for driving wood screws.

The handle is moulded directly to the bar giving a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current.

Stanley FatMax® VDE Insulated Screwdriver Parallel Tip has the following specification:.

Tip Size: 3.5mm.
Blade Length: 75mm (3in).

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140.

Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.

1 x Pack of 1000 Stanley TRA708T Heavy-Duty Staples 12mm

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140.

Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.

1 x Pack of 1000 Stanley TRA706T Heavy-Duty Staple 10mm