Tools & Site Equipment

The OX Pro Sponge Rubber Float - Coarse includes cell pads cemented into an aluminium backing plate for strength and durability.

FEATURES

Sponge rubber Coarse cell pad
Cemented to aluminium backing plate
Durable plastic handle

The OX Pro Dry Wall Scarifier 300mm / 22" for effective preparation and keying before applying plaster finishes. This high-quality scarifier comes with heat treated tines locked into a strong aluminium back.

FEATURES

High quality Scarifier for the preparation of drywall surfaces to help keying of plaster
Heat treated tines fitted in strong aluminium back
10 inch / 250mm

The OX Pro Mixing Paddle - 80 x 400mm Hex Shaft with positive ribbon is ideal for mixing low to medium materials quickly and effectively. Its high quality chrome plated steel shaft ensures durability and makes it easy to clean.

FEATURES

Positive ribbon / hex shaft
General purpose use on low to medium viscosity materials
Chrome plated durable, high quality steel
80 x 400mm

The OX Pro Margin Trowel ' 5" x 2" / 125 x 50mm features a flat rectangular precision tapered ground blade made from high quality carbon steel. Its DURAGRIP handle provides extreme comfort.

FEATURES

High quality carbon steel
Flat rectangular blade
DURAGRIP handle for extreme comfort
Precision tapered ground blade

OX Pro Nylon 350ft Brickline is made of a high quality durable tough twisted nylon, coloured in OX blue for maximum visibility.

FEATURES

Made from tough braided nylon line
OX blue colour for high visability
Very high quality durable material
High tension to minimise sagging
105m / 350ft length

The OX Pro 25mm Tuck Pointer features a high quality one piece carbon steel blade and a soft DURAGRIP handle for added comfort while you work.

FEATURES

One piece high quality carbon steel blade
DURAGRIP handle with finger protection
Soft grip handle for extreme comfort

The OX Pro 8mm Tuck Pointer features a high quality one piece carbon steel blade and a soft DURAGRIP handle for added comfort while you work.

FEATURES

One piece high quality carbon steel blade
DURAGRIP handle with finger protection
Soft grip handle for extreme comfort

The OX Pro Chalk Powder (white), contained in a refillable easy-pour container, is formulated for good adhesion and high visibility and can be used for both interior and exterior use. Comes in four different colours: white, red, yellow and blue.

FEATURES

Powder formulated for good adhesion and high visability
For both interior & exterior use
For use with chalk lines
Easy pour, refillable bottle
White Colour, 226 Grams

The OX Pro Chalk Powder (yellow), contained in a refillable easy-pour container, is formulated for good adhesion and high visibility and can be used for both interior and exterior use. Comes in four different colours: white, red, yellow and blue.

FEATURES

Powder formulated for good adhesion and high visability
For both interior & exterior use
For use with chalk lines
Easy pour, refillable bottle
Yellow Colour, 226 Grams

The OX Pro Chalk Powder (blue), contained in a refillable easy-pour container, is formulated for good adhesion and high visibility and can be used for both interior and exterior use. Comes in four different colours: white, red, yellow and blue.

FEATURES

Powder formulated for good adhesion and high visability
For both interior & exterior use
For use with chalk lines
Easy pour, refillable bottle
Blue Colour, 226 Grams

The OX Pro Chalk Powder (red), contained in a refillable easy-pour container, is formulated for good adhesion and high visibility and can be used for both interior and exterior use. Comes in four different colours: white, red, yellow and blue.

FEATURES

Powder formulated for good adhesion and high visability
For both interior & exterior use
For use with chalk lines
Easy pour, refillable bottle
Red Colour, 226 Grams

The OX Pro Torpedo Level is ideal for levelling up in areas with limited access. Featuring three solid block vials with lifetime warranty, a strong aircraft grade aluminium profile for strength with fine milled lower edge incorporating rare-earth magnets and V-groove for accurate and easy placement on pipes and curved surfaces allowing hands free levelling.

FEATURES

Die-cast aluminium body
3 Solid block vials
Fine milled surface with V-groove
Rare earth magnets for strong grip to metal surface
Accuracy <.5" / " (.5mm/m)

The tough 900mm OX Trade Level features unique highly accurate UV resistant magnified dual Easy View vials which are backed by a lifetime 'Vial Warranty'. The strong but lightweight aluminium profile is fine milled on the base edge for 100% precision. Shock resistant end caps protect against drops and bumps on site.

FEATURES

Lifetime vial warranty
3 solid acrylic vials with accuracy of .5mm/m or .0005in/in
UV resistant vials
Milled surface on base up to 1200mm length
Shock absorbing rubber end caps
Strong, lightweight aluminium profile
Tough rubber end caps

The OX Trade 8M/ 16FT Tape Measure comes in a DURAGRIP molded rubber case with a 25mm wide nylon-coated steel blade with both metric and imperial markings. Features shock absorbing blade return bumper and easy slide thumb lock.

FEATURES

Duragrip moulded rubber case
Nylon coated steel blade
Shock absorbing blade return bumper
Quick release bottom strip
25mm wide blade, 8m length, metric and imperial

The OX Trade 5M/ 16FT Tape Measure comes in a DURAGRIP molded rubber case with a 25mm wide nylon-coated steel blade with both metric and imperial markings. Features shock absorbing blade return bumper and easy slide thumb lock.

FEATURES

Duragrip moulded rubber case
Nylon coated steel blade
Shock absorbing blade return bumper
Quick release bottom strip
25mm wide blade, 5m length, metric and imperial

FEATURES

The general purpose blade with a 12mm segment
All round performance
Applications: building products, general purpose, kerbs and slabs, concrete paviors and blocks, roof tiles

FEATURES
6mm wide segment blade
Fantastic value for money product
Applications: mortar raking, brick raking, abrasive materials

FEATURES

Non-slip grip handle with shock reduction
Precision balanced
Forged, one piece steel construction
High quality steel for durability

The OX Pro 3'/75mm Joint Knife is excellent for surface preparation and application of fillers and compounds. It features a high quality flexible stainless steel blade while its soft DURAGRIP handle ensures comfort during use and incorporates a hammer end.

FEATURES

Stainless steel rivet secures the blade inside the handle more securely
Rugged polypropylene handle core
TPR soft-grip & ergonomic engineered handle that absorbs shock and reduces user fatigue
Safety finger stop/ thumb bolster for more comfortable holding
Superior quality with fully hardened, mirror polished blade.

The OX Pro Small Tool 13mm is drop forged from a single piece high quality carbon steel. Perfectly engineered, ground, and polished the small tool is perfect for intricate mortar and masonry work.

FEATURES

High quality carbon steel
One piece drop forged
Precision ground & tempered

The OX Pro Small Tool 16mm is drop forged from a single piece high quality carbon steel. Perfectly engineered, ground, and polished the small tool is perfect for intricate mortar and masonry work.

FEATURES

High quality carbon steel
One piece drop forged
Precision ground & tempered

The OX Pro Small Tool 19mm is drop forged from a single piece high quality carbon steel. Perfectly engineered, ground, and polished the small tool is perfect for intricate mortar and masonry work.

FEATURES

High quality carbon steel
One piece drop forged
Precision ground & tempered

FEATURES

Sleek styling and lightweight design
Padded temples ensure comfortable wear
Polycarbonate lenses provide protection from impact and block harmful UV rays
Conform to EN166
Clear Lens

FEATURES

Sleek styling and lightweight design
Padded temples ensure comfortable wear
Polycarbonate lenses provide protection from impact and block harmful UV rays
Conform to EN167
Smoked Lens

FEATURES

Features a warm acrylic 10 gauge liner so ideal for working in cold conditions
Also suitable for more heavy outdoor tasks
Conforms to EN388 standards
Size 9 / Large

The OX Pro Dry Wall Internal Corner Trowel features a flexible stainless steel blade with strong aluminium mounting ensuring perfect 90' corners. Its curved corners eliminate lines in the plaster and its DURAGRIP handle makes it comfortable in use.
FEATURES
Flexible stainless steel blade
Strong aluminium mounting
Flexes for perfect 90' corners
DURAGRIP handle for extreme comfort
Curved corners to eliminate lines in plaster

The OX Pro 2'/50mm Joint Knife is excellent for surface preparation and application of fillers and compounds. It features a high quality flexible stainless steel blade while its soft DURAGRIP handle ensures comfort during use and incorporates a hammer end.
FEATURES
Stainless steel rivet secures the blade inside the handle more securely
Rugged polypropylene handle core
TPR soft-grip & ergonomic engineered handle that absorbs shock and reduces user fatigue
Safety finger stop/ thumb bolster for more comfortable holding
Superior quality with fully hardened, mirror polished blade.

The OX Pro Stainless Steel Plasterers Trowel - 5in x 18in / 127 x 457mm's high-quality tempered stainless steel blade's edges have been pre-worn to eliminate line and ripple marks. Its lightweight aluminium shank is fully riveted for toughness. A DURAGRIP handle offers ultimate comfort and has been set for perfect balance.
FEATURES
Pre-worn edges to eliminate line & ripple marks
High quality tempered stainless steel blade
Lightweight aluminium shank - fully riveted
Handle set for perfect balance
Duragrip handle for ultimate comfort

The OX Pro Stainless Steel Plasterers Trowel - 5in x 14in / 127 x 356mm's high-quality tempered stainless steel blade's edges have been pre-worn to eliminate line and ripple marks. Its lightweight aluminium shank is fully riveted for toughness. A DURAGRIP handle offers ultimate comfort and has been set for perfect balance.
FEATURES
Pre-worn edges to eliminate line & ripple marks
High quality tempered stainless steel blade
Lightweight aluminium shank - fully riveted
Handle set for perfect balance
Duragrip handle for ultimate comfort

The OX Pro Stainless Steel Plasterers Trowel - 4.5in x 11in / 114 x 280mm's high-quality tempered stainless steel blade's edges have been pre-worn to eliminate line and ripple marks. Its lightweight aluminium shank is fully riveted for toughness. A DURAGRIP handle offers ultimate comfort and has been set for perfect balance.
FEATURES
Pre-worn edges to eliminate line & ripple marks
High quality tempered stainless steel blade
Lightweight aluminium shank - fully riveted
Handle set for perfect balance
Duragrip handle for ultimate comfort

FEATURES

Designed for clearing out mortar from between brickwork prior to pointing
Strong aluminium handle contoured to fit the hand
Two hardwearing wheels and replaceable point

The OX Pro 10/13mm Heavy Duty Brick Jointer made from high quality steel and leaves a perfect finish on mortar pointing.
FEATURES
For a professional finish to joints between bricks
Heavy duty design
High quality steel
Sizes clearly engraved onto tool

The OX Pro 16/19mm Heavy Duty Brick Jointer made from high quality steel and leaves a perfect finish on mortar pointing.
FEATURES
For a professional finish to joints between bricks
Heavy duty design
High quality steel
Sizes clearly engraved onto tool

The OX Pro 13/16mm Heavy Duty Brick Jointer made from high quality steel and leaves a perfect finish on mortar pointing.
FEATURES
For a professional finish to joints between bricks
Heavy duty design
High quality steel
Sizes clearly engraved onto tool

The OX Pro 10mm Tuck Pointer features a high quality one piece carbon steel blade and a soft DURAGRIP handle for added comfort while you work.

FEATURES

One piece high quality carbon steel blade
DURAGRIP handle with finger protection
Soft grip handle for extreme comfort

The OX Pro 6" London Pointing Trowel is made from high quality carbon steel and is tempered and ground for optimum accuracy and durability. Its DURAGRIP handle with finger protection is calibrated to give perfect balance and angle of lift.

FEATURES

DURAGRIP handle with finger protection
High quality carbon steel
Straight welded shank
Soft grip handle for extreme comfort

The OX Pro 4" London Pointing Trowel is made from high quality carbon steel and is tempered and ground for optimum accuracy and durability. Its DURAGRIP handle with finger protection is calibrated to give perfect balance and angle of lift.
FEATURES
DURAGRIP handle with finger protection
High quality carbon steel
Straight welded shank
Soft grip handle for extreme comfort

The OX Trade Heavy Duty Chalk Line Reel - 100ft / 30M Chalk features a high impact cast metal body and stainless-steel hook. This versatile tool can also double as a plumb bob.
FEATURES
Dual use ' can be used as plumb bob
High impact cast metal body
Stainless-steel hook
3M Chalkline length

FEATURES
Made from forged chrome vanadium steel
Dual hand guard
Soft grip handle
For cutting splitting of bricks masonry

FEATURES
Forged chrome vanadium steel
Dual hand guard
Soft grip handle
For cutting breaking of concrete

The OX Pro 12'/300mm Taping Knife has a high quality stainless steel blade flexible blade mounted on a strong aluminium backing plate for maximum strength and is ideal for spreading compounds. The DURAGRIP soft but durable handle is comfortable to use and reduces fatigue.
FEATURES
High quality flexible stainless steel blade
DURAGRIP soft handle for extreme comfort
Strong aluminium back
10 inch / 250mm Blade

FEATURES
The general purpose blade with a 12mm segment
All round performance
Applications: building products, general purpose, kerbs and slabs, concrete paviors and blocks, roof tiles

FEATURES
The general purpose blade with a 12mm segment
All round performance
Applications: building products, general purpose, kerbs and slabs, concrete paviors and blocks, roof tiles

FEATURES
Guaranteed to cut all construction products including metal
Excellent fast cut universal & hard materials
Reinforced flange
Cooling holes
Semi-transparent
Applications: granite, natural stone, clay products, engineering bricks, metal, concrete products, all building materials. Wear will increase on abrasive materials

FEATURES
Guaranteed to cut all construction products including metal
Excellent fast cut on universal & hard materials
Reinforced flange
Cooling holes
Semi-transparent
Applications: granite, natural stone, clay products, engineering bricks, metal, concrete products, all building materials. Wear will increase on abrasive materials

FEATURES
8mm segment height.
Cuts all types of tiles, including granite and marble.

Scan Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles. Manufactured from high density polyethylene and featuring a rain gutter and a six-point polyethylene harness adjustable from 530mm-630mm.

Conforms to EN397:2012 + A1:2012.

Scan Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles. Manufactured from high density polyethylene and featuring a rain gutter and a six-point polyethylene harness adjustable from 530mm-630mm.

Conforms to EN397:2012 + A1:2012.

Scan Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles. Manufactured from high density polyethylene and featuring a rain gutter and a six-point polyethylene harness adjustable from 530mm-630mm.

Conforms to EN397:2012 + A1:2012.

Scan Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles. Manufactured from high density polyethylene and featuring a rain gutter and a six-point polyethylene harness adjustable from 530mm-630mm.

Conforms to EN397:2012 + A1:2012.

The Scan Disposable Overall has been designed for hard-wearing use and provides protection against solid particles and water based paints and sprays. With a concealed zip and externally triple-stitched seams for strength.

This Scan Disposable Overall has the following specification:

Size: L
Colour: Navy
Chest: 100-108cm (39-42in)
Height: 174-181cm (5ft 8in)

Scan High-Visibility Orange Waistcoat with panels that reflect light to maximise visibility particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

Scan High-Visibility Orange Waistcoat with panels that reflect light to maximise visibility particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

Scan High-Visibility Yellow Waistcoat with panels that reflect light to maximise visibility, particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

Scan High-Visibility Yellow Waistcoat with panels that reflect light to maximise visibility, particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

Scan Disposable Latex Gloves are lightly powdered inside to absorb moisture, keeping hands dry and sweat-free. The gloves are ambidextrous, meaning that any glove will fit either left or right hands. They are non-sterile.

Manufactured to BS EN 455 parts 1 and 2.

Size: Large
Box Quantity: 100

This Scan First Aid Kit comes in a compact 'briefcase' style kit box made of polycarbonate. Inculdes sufficient content to safeguard 1-25 persons in a workplace. Approved by the British Standards Institute. Contains:

1 x CoolTherm Burn Relief Dressing 10 x 10cm
2 x Single Use Triangular Bandages 90 x 127cm
40 x Assorted Waterproof Plasters
2 x Medium Sterile HSE Dressings 12 x 12cm (unboxed)
2 x Large Sterile HSE Dressings 18 x 18cm (unboxed)
1 x Conforming Bandage 7.5cm x 4m
1 x Finger Dressing with Adhesive Fixing 3.5cm
2 x Sterile Eye Pad Dressing no.16 with Bandage (Flow Wrapped)
1 x Microporous Tape 2.5cm x 5m
20 x Cleansing Wipes
1 x Pair of Small Universal Shears 6in
1 x Adult Sized Foil Blanket 130 x 210cm
6 x Pairs of Nitrile Gloves
1 x Rebreath Mouth to Mouth Resuscitation Device with Valve
1 x First Aid Guidance Leaflet

These Scan Black PU Coated Gloves are made from knitted nylon with a seamless finish and a fine polyurethane coating over the palm and fingers. The back of the glove is uncoated to provide ventilation to the hand, avoiding perspiration and clamminess. These gloves are suited to work where a high level of dexterity is needed along with a good protection factor.

Typical applications include packing, inspection and fine component assembly operations.

Conforms to EN 388:2016 and EN ISO 21420 Standards.

Abrasion Performance Index (1-4): 4
Blade Cut Performance Index (1-5): 1
Tear Performance Index (1-4): 3
Puncture Performance Index (1-4): 1

The Scan Flexi Spectacles have a sports style, designed for protection against low energy, high-speed impacts of up to 45m/s (100mph). They are manufactured using a single piece, wraparound lens to provide maximum peripheral vision and side protection. The lens is scratch and impact resistant with an anti-fog coating and is UV resistant to EN 170. The spectacles are user-friendly, ultra-lightweight with super flexible arms and feature a soft nose bridge for added comfort.

Coloured lens helps filter light to enhance your visibility from indoor low light to outdoors where bright light can be an issue. Selecting the correct shade (lens filter) will improve visibility in many applications by enhancing the contrast and protecting eyes from excessive glare.

Conforms to EN 166:1F and EN 170 UV ray protection.

The Scan Flexi Spectacle Amber are ideal for low light applications, indoors.

The Scan Flexi Spectacles have a sports style, designed for protection against low energy, high-speed impacts of up to 45m/s (100mph). They are manufactured using a single piece, wraparound lens to provide maximum peripheral vision and side protection. The lens is scratch and impact resistant with an anti-fog coating and is UV resistant to EN 170. The spectacles are user-friendly, ultra-lightweight with super flexible arms and feature a soft nose bridge for added comfort.

Coloured lens helps filter light to enhance your visibility from indoor low light to outdoors where bright light can be an issue. Selecting the correct shade (lens filter) will improve visibility in many applications by enhancing the contrast and protecting eyes from excessive glare.

Conforms to EN 166:1F and EN 170 UV ray protection.

The Scan Flexi Spectacle Smoke are ideal for outdoor use, for protection from excessive glare.

The Scan Flexi Spectacles have a sports style, designed for protection against low energy, high-speed impacts of up to 45m/s (100mph). They are manufactured using a single piece, wraparound lens to provide maximum peripheral vision and side protection. The lens is scratch and impact resistant with an anti-fog coating and is UV resistant to EN 170. The spectacles are user-friendly, ultra-lightweight with super flexible arms and feature a soft nose bridge for added comfort.

Coloured lens helps filter light to enhance your visibility from indoor low light to outdoors where bright light can be an issue. Selecting the correct shade (lens filter) will improve visibility in many applications by enhancing the contrast and protecting eyes from excessive glare.

Conforms to EN 166:1F and EN 170 UV ray protection.

The Scan Flexi Spectacle Clear are ideal for general use indoors, under normal lighting conditions.

These Scan Classic Spectacles offer protection against low-energy, high-speed impacts of up to 45m/s (100mph). They are wraparound with a one-piece, scratch-resistant, clear polycarbonate lens that provides UV protection. The built-in side shields provide extra lateral protection. The spectacles are lightweight with adjustable ratchet arms, which give greater comfort and fit.

Conforms to EN 166:1F standard.

The Scan Moulded Valved Safety Goggles are lightweight but strong and cover most eye protection requirements. These goggles will withstand medium energy, high-speed impacts of up to 120m/s (270mph). They have a blue tinted PVC frame with a clear impact resistant lens that will protect against liquid splash, debris and flying particles. The valve caps are removable to allow use as either indirect or direct vent goggles. The adjustable elastic headband is attached with a ball joint.

Conforms to EN 166:1B.

Scan Tapered Foam Earplugs made from soft energy absorbing polymer foam, which compresses and then expands for a perfect fit in the ear canal with the benefit of attached cords to avoid dropping or loss and are visible in use. Reduces sound levels to the ear drum while maintaining aural contact. Easy insertion and removal. Supplied as 6 pairs, in 3 re-sealable containers each with 2 pairs of earplugs.

Conforms to EN352-2:2002.

SNR = 38dB (Single Number Rating (SNR) = the number of decibels reduced by the product).

Scan Collapsible Ear Defenders are suitable for general purpose use. Effective in reducing noise levels, whilst still allowing the wearer to hear normal conversation. The soft and wide PVC ear cushions enhance comfort, and the adjustable cup height is designed to fit the majority of wearers. Foldable for easy storage.

Conform to EN 352-1:2002 standard.

Scan Professional Gel Kneepads are top of the range, made using 13mm thick high-density cell foam with an 'Ultra' comfort gel inner pad for increased comfort in use. Typical applications include kneeling on uneven surfaces, laminate flooring, roofing work, concrete and laying patios etc.

They feature oversized caps - which give added protective coverage to the knee - and have 2 adjustable fastening straps for added comfort and security.

The lower strap is a fully adjustable neoprene strap with a hook and loop fastening and it secures below the knee for all-day comfort. The top strap is elasticated and fully adjustable via means of a quick clip buckle.

Conforms to EN 14404 standard.

Scan Heavy-Duty Rigger Gloves are superior quality heavy-duty cow split leather gloves with a double stitched green split leather reinforced palm, thumb and full wrapped index finger. Have a red fabric back with elasticated braid and 7cm rubberised cuffs, with reinforced fingertips and knuckle strap.

Conforms to EN388:2016 and EN ISO 21420 Standards.

Abrasion Performance Index (1-4): 3
Blade Cut Performance Index (1-5): 2
Tear Performance Index (1-4): 4
Puncture Performance Index (1-4): 4

Scan Nitrile Coated Knitted Gloves are resilient to both grease and fuel, making them ideal for handling small oily parts. The tough palm and finger nitrile coating provides effective abrasion and puncture resistance. A 13g knitted seamless polyester liner improves comfort.

Conforms to EN420 and EN388 Standards.

The Scan Waterproof Latex Gloves offer both warmth and water resistance. They have been double dipped in latex for excellent abrasion resistance. The 15g nylon liner and elasticated knitted cuff help keep your hands warm.

Conforms to EN420 and EN388 Standards.

Abrasion Performance Index (1-4): 2
Blade Cut Performance Index (1-5): 1
Tear Performance Index (1-4): 3
Puncture Performance Index (1-4): 1

Scan Knitshell Latex Palm Gloves are an essential garment for the protection of hands and offer maximum user comfort. Ideal for many work situations, they provide protection against minimal cuts and abrasions. The gloves have a durable non-slip latex coating which provides excellent protection and grip. Knitted wrists ensure comfort.

Conforms to EN 388:2016 and EN ISO 21420 standards.

Abrasion Performance Index (1-4): 2
Blade Cut Performance Index (1-5): 1
Tear Performance Index (1-4): 4
Puncture Performance Index (1-4): 1

These Scan FPP3 Premier valved disposable masks are designed to cover the nose, mouth and chin. The construction is made of the filter material itself, and the exhalation valve makes breathing easier. These masks have passed the optional Dolomite clogging test, giving the user better breathing resistance for longer. They are flat folding for easy pocket storage. They are ideal for use with:
- Brick dust
- Toxic waste disposal
- Casting metals
- Smoke fumes
- Paint and varnish fumes
- Welding
- Hand and power sanding of soft and hard wood and MDF dust
- Masonry and concrete dust
- Metalworking with power tools
- Loft insulation/fibre glass
- Mineral fibres
- Silica
- Conforms to EN149:2001+A1:2009.

With a FPP3 protection level, these masks will protect lungs against very fine particles (less than 2 microns), such as very fine dusts, fibres, aqueous mists and oil-based mists. For a guide on protection levels, please see below.

The masks have elasticated retaining straps to keep them securely in place. In addition they have an adjustable nose clip and full PVC face seal for custom fitting. The non-irritating inner face piece ensures added comfort. To be disposed of after each period of work or 8 hour shift.

The masks conform to EN149: 2001 + A1: 2009

Disposable Mask Protection Levels:
FFP1: Particles larger than 5 microns. Dusts, Fumes, Aqueous mists, Oil based mists
FFP2 Particles between 2 and 5 microns. Fine dusts, Fibres, Aqueous mists, Oil based mists
FFP3 Particles less than 2 microns. Very fine dusts, Fibres, Aqueous mists, Oil based mists
EN149 Filtering Face Piece for Particulates.

Scan Fold Flat Disposable Masks for protection against fine particles. This mask has a low breathing resistance, a non-irritating inner face piece and an adjustable nose clip with soft foam nosepiece. Secured by elasticated retaining straps.

FFP2 NR For use with: brick dust, ceramic tile dust, hand sanding of wood & MDF, and loft insulation.

Conforms to EN149:2001 A1:2009
Supplied as pack of 3 or a box of 20.

Pack of 3 Scan Fold Flat Disposable Masks FFP2 Protection

3-IN-ONE is a specially formulated lubricating, penetrating and cleaning oil. 3-IN-ONE's unique set of ingredients enable it to lubricate as well as protect metal surfaces, on nuts and bolts, hand and power tools, bearings, locks, fans, firearms, bicycles, rollers, wheels, drill bits, saw blades, ladders, seals, bearings, shafts, trailer hitches, skateboards, and moving parts...nearly everything that moves.

Since 1894, 3-IN-ONE's versatile multi-purpose drip oil has been a trusted tool used by professional tradesmen and do-it-yourselfers to lubricate moving parts, penetrate rust, clean and protect tools, and much more.

Its precise, easy-to-use drip spout enables precise application, with no over spray or splatter, and its updated packaging has a fill level indicator strip that shows you when you're running low. 3-IN-ONE oil can be used to lubricate tools, hinges, nuts and bolts, bicycles, wheels, fans and many other moving parts.

Lubricate hinges to keep them from squeaking
Loosen rusted nuts, bolts, and screws
Lubricate stuck locks
Prevent rust and corrosion
Extend the life of hand and power tools
Bicycle maintenance
Maintain and lubricate garage door parts
Keep drill bits and saw blades cool
Lubricate wheel bearings
Clean and lubricate trailer hitches
Lubricate fan bearings
Restore garden shears and snips

3-IN-ONE is a specially formulated lubricating, penetrating and cleaning oil. 3-IN-ONE's unique set of ingredients enable it to lubricate as well as protect metal surfaces, on nuts and bolts, hand and power tools, bearings, locks, fans, firearms, bicycles, rollers, wheels, drill bits, saw blades, ladders, seals, bearings, shafts, trailer hitches, skateboards, and moving parts...nearly everything that moves.

Since 1894, 3-IN-ONE's versatile multi-purpose drip oil has been a trusted tool used by professional tradesmen and do-it-yourselfers to lubricate moving parts, penetrate rust, clean and protect tools, and much more.

Its precise, easy-to-use drip spout enables precise application, with no over spray or splatter, and its updated packaging has a fill level indicator strip that shows you when you're running low. 3-IN-ONE oil can be used to lubricate tools, hinges, nuts and bolts, bicycles, wheels, fans and many other moving parts.

Lubricate hinges to keep them from squeaking
Loosen rusted nuts, bolts, and screws
Lubricate stuck locks
Prevent rust and corrosion
Extend the life of hand and power tools
Bicycle maintenance
Maintain and lubricate garage door parts
Keep drill bits and saw blades cool
Lubricate wheel bearings
Clean and lubricate trailer hitches
Lubricate fan bearings
Restore garden shears and snips

FEATURES
• Guaranteed to cut all construction products including metal
• Excellent fast cut universal & hard materials
• Reinforced flange
• Cooling holes
• Semi-transparent
• Applications: granite, natural stone, clay products, engineering bricks, metal, concrete products, all building materials. Wear will increase on abrasive materials

FEATURES

• The general purpose blade with a 12mm segment
• All round performance
• Applications: building products, general purpose, kerbs and slabs, concrete paviors and blocks, roof tiles

Mandatory Signs are a Blue circle containing a white image denoting that a specific course of action must be taken. These signs help workers and members of the public instantly understand what course of action is required of them, using simple verbal commands and easily recognisable icons

• Use to highlight areas in and around your facility that the relevant PPE must be worn
• Available in a range of sizes and materials
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry surface <

Mandatory Signs are a Blue circle containing a white image denoting that a specific course of action must be taken. These signs help workers and members of the public instantly understand what course of action is required of them, using simple verbal commands and easily recognisable icons

• Fire door action signs provide essential, detailed information in the event of a fire
• Available in a range of sizes and materials
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry surface <

Mandatory Signs are a Blue circle containing a white image denoting that a specific course of action must be taken. These signs help workers and members of the public instantly understand what course of action is required of them, using simple verbal commands and easily recognisable icons

• Fire door action signs provide essential, detailed information in the event of a fire
• Available in a range of sizes and materials
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry surface <

Prohibition Signs are a Red circular band with a diagonal bar on a White Background. The Black symbol behind indicates what type of action employees and visitors need to avoid doing for their own safety and comply with company rules and regulations

• No smoking signs must be displayed at each entrance to your workplace
• Additional no smoking signs can be used internally to help ensure your smoke free policy is adhered to
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry surface <

Prohibition Signs are a Red circular band with a diagonal bar on a White Background. The Black symbol behind indicates what type of action employees and visitors need to avoid doing for their own safety and comply with company rules and regulations

• No smoking signs must be displayed at each entrance to your workplace
• Additional no smoking signs can be used internally to help ensure your smoke free policy is adhered to
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry surface <

Hazard Warning signs are a Yellow triangle with a black border and symbol denoting a hazard in the environment. These signs are essential to warn employees, visitors and the general public about potential risks in the immediate vicinity.

• Hazard signs must be displayed to warn workers, visitors and the general public of hazardous areas or materials on your premises
• Enables employees and visitors to take adequate safety measures to avoid personal injury
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry surface

Hazard Warning signs are a Yellow triangle with a black border and symbol denoting a hazard in the environment. These signs are essential to warn employees, visitors and the general public about potential risks in the immediate vicinity.

• Hazard signs must be displayed to warn workers, visitors and the general public of hazardous areas or materials on your premises
• Enables employees and visitors to take adequate safety measures to avoid personal injury
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry surface

Fire Safety and Safe Condition signs offer a wide range of safety signs which provides information on Fire Assembly, Fire Exit and Evacuation, Safety Instruction and First Aid Treatment. All our signs conform to the BS EN ISO 7010 regulation, ensuring that all graphical safety symbols are consistent and compliant.

• Helps people to clearly identify the exit route off the premises in the event that an evacuation is required due to a fire
• Position around a facility to show where the nearest fire exit is
• Available in a range of sizes and materials
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry sur

Fire Safety and Safe Condition signs offer a wide range of safety signs which provides information on Fire Assembly, Fire Exit and Evacuation, Safety Instruction and First Aid Treatment. All our signs conform to the BS EN ISO 7010 regulation, ensuring that all graphical safety symbols are consistent and compliant.

• Helps people to clearly identify the exit route off the premises in the event that an evacuation is required due to a fire
• Position around a facility to show where the nearest fire exit is
• Available in a range of sizes and materials
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry sur

Fire Safety and Safe Condition signs offer a wide range of safety signs which provides information on Fire Assembly, Fire Exit and Evacuation, Safety Instruction and First Aid Treatment. All our signs conform to the BS EN ISO 7010 regulation, ensuring that all graphical safety symbols are consistent and compliant.

• Helps people to clearly identify the exit route off the premises in the event that an evacuation is required due to a fire
• Position around a facility to show where the nearest fire exit is
• Available in a range of sizes and materials
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry sur

Fire Safety and Safe Condition signs offer a wide range of safety signs which provides information on Fire Assembly, Fire Exit and Evacuation, Safety Instruction and First Aid Treatment. All our signs conform to the BS EN ISO 7010 regulation, ensuring that all graphical safety symbols are consistent and compliant.

• Helps people to clearly identify the exit route off the premises in the event that an evacuation is required due to a fire
• Position around a facility to show where the nearest fire exit is
• Available in a range of sizes and materials
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry sur

Fire Safety and Safe Condition signs offer a wide range of safety signs which provides information on Fire Assembly, Fire Exit and Evacuation, Safety Instruction and First Aid Treatment. All our signs conform to the BS EN ISO 7010 regulation, ensuring that all graphical safety symbols are consistent and compliant.

• Advises actions needed to exit your premises in an emergency evacuation situation
• Self adhesive backing
• Making it easy to apply to a clean dry surface
• Designed and manufactured in the UK

The Bahco S330 Socket Set contains sockets made from high performance alloy steel. With a Dynamic Drive™ profile to protect the sockets from wear and damage. Supplied in an oil and temperature resistant polypropylene case. Conforms to DIN 3120 / ISO 1174.

Contains:

12 x 3/8in Hex Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 & 22mm.
1 x 3/8in 60 Teeth Quick Release Ratchet.
2 x 3/8in Extension Bars: 75mm (3in) & 150mm (6in).
1 x 3/8in Universal Joint.
1 x 3/8in x 1/4in Bit Holder.

2 x 3/8in Spark Plug Sockets Hex: 16mm (5/8in) & 21mm (13/16in).

1 x 1/4in Spinner Handle, 2-Component Handle.

1 x 1/4in x 1/4in Bit Holder.

3 x 1/4in Slotted Bits: 4, 5.5 & 7mm.
4 x 1/4in Phillips Bits: PH1, PH2, PH3 & PH4.
6 x 1/4in Hex Bits: 3, 4, 5, 6, 7 & 8mm.

These Scan Work Socks have a reinforced heel and toe with an ergonomic shape for optimum fit. The non-slip bridge helps to keep the sock in position for added comfort.

Supplied as a twin pack, 2 pairs included.

Material: 80% cotton, 17% polyamide, 3% elastane.

The Olympia Tools® Reciprocating Saw is fitted with a powerful 900W motor and an adjustable front shoe. A speed preselection wheel increases cutting control. Its easy-to-handle design incorporates a soft grip handle for reduced fatigue. Tool-less blade change ensures less downtime.

Supplied with: 1 x Hex Key.

Specifications:

Input Power: 900W.
Strokes at No Load: 0-2,800/min.
Stroke Height: 20mm.
Max. Cutting Depth: Wood 115mm, Steel 8mm.

Tin of 10 Faithfull Multi-Purpose Cutting Discs. Ideal for cutting a wide range of materials used in the construction and fabrication industries. At only 1mm thick they are able to provide a fast cutting action with less waste and dust. Multi-Cut discs solve the problem of cutting several different materials at once and are ideal for cutting modern-day composite materials used throughout industry. Will cut sheet metal, stainless steel (inox), pipes and profiles, brick, stone, ceramic tiles and other building materials along with plastics/ PVC.

These versatile discs are available in the three most popular sizes and are supplied in a sturdy metal storage tin of ten for safekeeping.

Specifications:

Diameter: 115mm.
Thickness: 1.0mm.
Bore: 22.23mm.
Max. RPM: 13,300.

The Bahco 317 Hacksaw is suitable for all-round use. It has a slim, comfortable frame design to improve access in confined spaces and to allow easier storage. The special grip at the front of the frame provides good support for the guiding hand to ensure superb performance.

The hacksaw frame has an alternative 90° blade mounting for flush cutting. It is supplied complete with a 300mm (12in) 24 TPI reliable and shatterproof Sandflex® bi-metal blade for excellent cutting performance.

Supplied with 3 extra blades FREE.

Specifications:

Frame Length: 432mm.
Blade Length: 300mm (12in).
Weight: 470g.

1 x supplied in one of the colours shown.

The Hultafors Hi-Vis Retractable Knife has an ergonomic design. Its angled design has a pronounced finger grip and narrowing tip that affords excellent grip when measuring and cutting plasterboard in a single stroke.

The knife has a durable zinc housing with a screw wheel for easy opening without the use of tools. The handle contains a practical, spring-loaded blade magazine holding 10 spare blades (60mm). Few moving parts and magnetic fixings make changing and cleaning blades easy. The blade can be locked in 4 stages.

3 Pairs of Scan Orange/Black Knitshell Thermal Gloves. These high-visibility gloves have a black latex wrinkle finish coating to the palm and fingers. They give excellent grip in both wet and dry conditions. Ideal for the construction, automotive and handling industries.

Conforms to EN ISO 21420 and EN 388.

STANLEY® FatMax® 37 Piece Socket & Bit Set. All sockets feature a Maxidrive profile to maximise contact between the socket and nut, and visible dimensions to easily identify socket size.

Supplied in a PRO-STACK case with a transparent lid for easy and fast content identification. Compatible with the STANLEY® FATMAX® PRO-STACK storage system. Fixable to the Medium and Large PRO-STACK casing, this module offers a true mobile and secure solution for your mechanics tools. Contains:

11 x 1/4in 6 Point Sockets: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm.

3 x 1/4in Pozidriv Bits: PZ1, PZ2 and PZ3.

3 x 1/4in Philips Bits: PH1, PH2 and PH3.

6 x 1/4in Hex Bits: 3, 4, 5, 5.5, 6 and 7.

6 x 1/4in Slotted Bits: 3, 4, 5, 6, 7 and 8mm.

6 x 1/4in TEMPERTORX Bits: T10, T15, T20, T25, T27 and T30.

1 x 1/4in Socket Holder.

1 x 1/4in Ratchet-Wrench 60T.

Scan Flexi Safety Glasses are worn for protection against low energy, high speed impacts. These Flexible Safety Glasses are packed with features, including highly flexible arms, soft nose bridge for user comfort, as well as a UV, scratch and impact resistant lens with anti-fog coating. The wrap-around single piece lens of these ultra-lightweight protective glasses also provides maximum peripheral vision.

Conforms to EN166:1F – withstands low energy high speed impacts up to 45m/s (100mph) and EN170.

This Twin Pack contains:

1 x Pair of Clear Lens Safety Glasses for general indoor applications.

1 x Pair of Smoke Lens Safety Glasses for outdoor protection against excessive glare.