Tools & Site Equipment

The DEWALT DCK2110L2 XR Brushless Sub-Compact Twin Pack, contains the following: 1 x 12V DCD701 XR Brushless Sub-Compact Drill Driver has a lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. Compatible with your existing 10.8V batteries and tools. Chuck: 10mm Keyless. No Load Speed: 0-425/0-1,500/min. Max. Torque: 57.5Nm, 15 Settings. Capacity: Wood 20mm. Weight: 0.9kg. 1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Compatible with your existing 10.8V batteries and tools. No Load Speed: 0-950/0-1,950/0-2,850/min. Impact Rate: 0-3,600/bpm. Max. Torque: 163Nm. Bare Unit Weight: 0.8kg. Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x 10.8-18V DCB112 XR Multi-Voltage Li-ion Charger and 1 x TSTAK II Kit Box.

The DEWALT DCS570 XR Brushless Circular Saw is ideal for general purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power on job site cutting tasks and joinery materials. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. Specifications: No Load Speed: 5,500/min. Max Cutting Depth @90º: 64mm. Blade: 184mm, 16mm Bore. Bevel Capacity: 57°. The DEWALT DCS570N XR Brushless 184mm Circular Saw is supplied as a bare unit, no battery or charger.

Welded steel construction. 250 x 250mm platform. Rubberised feet provide slip resistance and floor protection. 80mm wide steps for extra comfort. Powder coated grey for neutral wipe clean protection. EN131 - 125Kg rating for - DOMESTIC USE ONLY.

"Safety Rigger Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof membrane system Rubber heel counter Ankle support Fitted leg stem Wider fitting Triple stitched seams Pull on loop Shaped collar K3 Rubber Outsole Breathable lining"

The DEWALT DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger and lock-off switch for quick controlled cuts and enhanced work safety. The brushless motor offers incredible efficiency and increased power delivery, resulting in less wear and increased longevity of the tool. With a 4-position pendulum action that controls the aggressiveness or smoothness of cuts. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible. Bare Unit, No Battery or Charger Supplied. Specifications: Strokes at No Load: 0-3,200/min. Stroke Length: 26mm. Bevel Capacity: 0-45°. Capacity: Metal 10mm, Wood 135mm.

The DEWALT DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. Specifications: No Load Speed: 9,000/min. Disc Diameter: 125mm, M14 Spindle. The DEWALT DCG405N XR Brushless Grinder is supplied as a bare unit, no battery or charger supplied.

The Einhell TE-CD 18/48 Li-i Power X-Change Impact Drill delivers power with pinpoint accuracy exactly where it is needed. Ideal for drilling in harder materials such as stone and brick on restoration and renovation jobs. Electronic speed control ensures the impact drill driver can be adjusted to the particular material and application. Its ergonomic soft grip provides exceptionally easy handling and a firm, secure grip. An LED light provides an optimum view of the work area, even in dark areas. The lithium-ion battery has a battery management system for optimum discharge control and long battery life. Thanks to the battery capacity indicator with 3 LEDs, you can check the current charge level at a glance. Its Power X-Change system battery can be used in all products from the Power X-Change family. Supplied with: 2 x 18V 2.0Ah Power X-Change Li-ion Batteries. 1 x Power X-Change Li-ion Charger. 1 x Carry Case. Specifications: Drill Chuck: Single Sleeve 13mm. No Load Speed: 0-400/0-1,500/min. Impact Rate: 0-6,400/0-24,000/bpm. Max. Torque: 48Nm. Torque Settings: 23. Charging Time: 80min.. Weight: 1.5kg.

"A premium dry core bit with spiral barrel design for swift dust removal. Fast start segments. Side vents help keep the bits cool resulting in longer life. Suitable for use in masonry, brick, concrete with light or medium steel reinforcing. Also effective for granite, marble and stone." "A premium dry core bit with spiral barrel design for swift dust removal. Fast start segments. Side vents help keep the bits cool resulting in longer life. Suitable for use in masonry, brick, concrete with light or medium steel reinforcing. Also effective for granite, marble and stone."

Welded steel construction. 250 x 250mm platform. Rubberised feet provide slip resistance and floor protection. 80mm wide steps for extra comfort. Powder coated grey for neutral wipe clean protection. EN131 - 125Kg rating for - DOMESTIC USE ONLY.

The Einhell TE-HD 18 Li Cordless Rotary Hammer has a robust and versatile design, ideal for screwing and drilling jobs with an additional powerful hammer function. It's pneumatic hammer mechanism offers highly effective propulsion in concrete. The powerful motor and metal gearing produce a high torque and provide increased durability. The finely adjustable speed electronics allow for additional control in sensitive jobs. Ergonomic soft grip handle for comfortable, safe handling every time. Quick stop, LED light and the automatic SDS-Plus chuck enable comfortable operations. Compatible with all other Power X-Change tools and batteries. Supplied with: 1 x 18V 1.5Ah Li-ion Power X-Change Battery, 1 x 18V Power X-Charger System Fast Charger and 1 x Carry Case. Specifications: Modes: Screwdriving, Drilling, Hammer Drilling In Concrete. No Load Speed: 0-1,100/min. Impact Rate: 0-5,700/bpm with 1.2 joules. Capacity: Concrete 12mm. Charging Time: 30 Minutes.

"Safety Rigger Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof membrane system Rubber heel counter Ankle support Fitted leg stem Wider fitting Triple stitched seams Pull on loop Shaped collar K3 Rubber Outsole Breathable lining"

The Einhell GE-CM 18/30 Li Power X-Change Lawnmower is recommended for lawns of up to 150m² in size. Fitted with a brushless motor for increased power and longer run time than a conventional carbon brush motor. Its high-quality impact-resistant plastic housing also increases product lifetime. For practical mowing, there is a 3-level axial cutting height adjustment facility. A folding long handle enables storage in minimum space. For easy transportation, there is an integrated carry handle. Its large wheels put less stress on the lawn while mowing. The battery provides the mower with a speed of up to 3,500 rpm, with a cutting width of 30cm. A battery charge level indicator with three LEDs makes it easy to keep a constant eye on the remaining power. Supplied with: 1 x 18V 3.0Ah Li-ion Battery and 1 x Charger. Specification: Cutting Width: 30cm Cutting Height Adjustment: 3 Stages, 30-70mm Grass Box Capacity: 25 litre Wheel Diameter: Front 140mm, Rear 140mm

No Load Speed: 0-3,100/min. Max. Torque: 172Nm. Capacity: Screw 4-10mm, Bolt M5-M16, HT Bolt M5-M12.

The DEWALT DCS355 XR Brushless Oscillating Multi-Tool delivers up to 57% more runtime over brushed motors. It uses the Quick-Change Accessory System that allows blades and attachments to be changed without the use of tools. The Dual-Grip Variable Speed Trigger provides the ultimate speed and application control. It has a bright LED light that illuminates dark work surfaces for accurate cutting, whilst the depth control straight cut guide increases cutting accuracy for detailed work. Specifications: No Load Speed: 0-20,000/min. Length: 310mm. DEWALT DCS355N XR Brushless Oscillating Tool 18 Volt Bare Unit. Supplied WITHOUT batteries or a charger.

The OX Pro Speedskim' SF 1200 features a tough aluminium handle and ultra-fine 0.3mm stainless steel blade for fine finishing of plaster, drywall, and tape & jointing, and is part of the new and revolutionary tool system designed to increase meterage output and enhance quality of finish. Compatible with all gypsum-based finishing plasters (both hand and spray applied), jointing systems and compounds, it comes complete with an integral blade guard. One of Speedskim's major benefits is the reduction in harmful effects of fatigue & RSI. FEATURES Speedskim' is the new and revolutionary tool system designed to increase meterage output and enhance quality of finish ' at the same time significantly reducing the harmful effects of fatigue & RSI Ultra-fine 0.3mm stainless steel blade Fine finishing of plaster, drywall & tape & jointing Compatible with all gypsum based finishing plasters (hand and spray applied), Jointing systems and compounds Complete with integral blade guard

"Safety Rigger Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof membrane system Rubber heel counter Ankle support Fitted leg stem Wider fitting Triple stitched seams Pull on loop Shaped collar K3 Rubber Outsole Breathable lining"

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Rubber anti-scuff toe protector Distinctive notched welt strip Wider fitting Triple stitched seams Punced collar Pull on loop K3 Rubber Outsole Breathable lining"

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Rubber anti-scuff toe protector Distinctive notched welt strip Wider fitting Triple stitched seams Punced collar Pull on loop K3 Rubber Outsole Breathable lining"

"Safety Lace/Zip Boot Non-metallic safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Heavy service YKK zipper Reflective piping Anti-scuff toe protector Heel & ankle support with Kick-off heel spur Breathable lining and Comfort insoles Punched collar Velcro security flap Buckshot Rubber Outsole"

"Safety Neoprene Buckbootz Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Cold insulation certified to -17°C for 30 minutes Heat insulation certified to 150°C for 30 minutes Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Reflective enhancement 5mm neoprene with rubber protection Aerospencer breathable high visibility lining Kick-off heel spur Detachable washable insole K3 Rubber Outsole Aerospencer breathable lining"

FEATURES Guaranteed to cut all construction products including metal Excellent fast cut on universal & hard materials Reinforced flange Cooling holes Semi-transparent Applications: granite, natural stone, clay products, engineering bricks, metal, concrete products, all building materials. Wear will increase on abrasive materials

The Einhell TC-JS 18 Li Power X-Change Jigsaw delivers exact cuts thanks to its smooth operation. For fast cuts, it has a selectable pendulum action. The universal blade holder, without tools, saves unnecessary hand movements, enabling the blade to be changed quickly and without the need for any tools. For optimum visibility whilst working, there is a dust blow-off function. The integrated plastic sliding element protects particularly sensitive workpieces. Cordless freedom with concentrated rechargeable battery power: The rechargeable batteries from the Einhell system family can be used in all Power X-Change devices. Supplied with: 5 x Jigsaw Blades, 1 x 18V 2.5Ah Li-ion Battery and 1 x Charger. Specifications: Strokes at No Load: 0-2,700/min. Stroke Length: 20mm. Bevel Capacity: 0-45°. Capacity: Metal 8mm, Wood 70mm, Plastic 10mm.

"Safety Dealer Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Wider fitting Dual thickness rubber scuff toe protector Rubber heel kick-off spur Tough and durable Goodyear welted construction Triple stitched uppers Riveted pull-on loop K3 Rubber Outsole Breathable lining"

"Safety Dealer Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Buckflex 'built-in shoe horn' Wider fitting Tough and durable Goodyear welted construction Triple stitched and riveted pull-on loop K3 Rubber Outsole Breathable lining"

"Safety Lace/Zip Boot Non-metallic safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Heavy service YKK zipper Reflective piping Anti-scuff toe protector Heel & ankle support with Kick-off heel spur Breathable lining and Comfort insoles Punched collar Velcro security flap Buckshot Rubber Outsole"

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Reflective piping Anti-scuff toe protector Heel & ankle support Comfort insoles Buckshot Rubber Outsole Breathable lining"

"Safety Hybridz Boot Safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof and Triple stitched uppers Waterproof elastic Reflective inserts Unique lace/dealer boot combination Anti-scuff toe protector Notched padded collar Ankle support heel piece Buckshot Rubber Outsole Breathable lining"

"Safety Lace/Zip Boot Non-metallic safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Heavy service YKK zipper Reflective piping Anti-scuff toe protector Heel & ankle support with Kick-off heel spur Breathable lining and Comfort insoles Punched collar Velcro security flap Buckshot Rubber Outsole"

"Safety Dealer Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Buckflex 'built-in shoe horn' Wider fitting Tough and durable Goodyear welted construction Triple stitched and riveted pull-on loop K3 Rubber Outsole Breathable lining"

Fast cutting unique diamond segment ensures swift and smooth cutting, making it easier and more accurate. suitable for wet and dry cutting. Applications: guaranteed to cut porcelain, all hard stone and all ceramic tiles. Mesh segment design ensures minimal chipping of material during cutting. Cooling holes for fast effective heat reduction to ensure the stability of the centre plate whilst cutting extremely hard materials. Brand new ox photo quality screen-print ensures ultimate visibility on shelf and clear overview of blade usage. FEATURES Fast cutting unique diamond segment ensures swift and smooth cutting, making it easier and more accurate Suitable for wet and dry cutting of porcelain, stone and other hard tiles Mesh segment design ensures minimal chipping of material during cutting

Input Power: 1,100W. No Load Speed: 3,450/min. Blade: 216 x 30mm Bore. Turntable Setting (Left/Right): 47°/47°. Max. Cutting Width: 90°/45°: 120/80mm. Max. Cutting Depth: 90°/45°: 60/45mm, 90°/90°: 120x60mm. Double Mitre 45°/45°: 80x45mm. Cable Length: 2m.

"Safety Dealer Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Buckflex 'built-in shoe horn' Wider fitting Tough and durable Goodyear welted construction Triple stitched and riveted pull-on loop K3 Rubber Outsole Breathable lining"

"Safety Dealer Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Buckflex 'built-in shoe horn' Wider fitting Tough and durable Goodyear welted construction Triple stitched and riveted pull-on loop K3 Rubber Outsole Breathable lining"

"Safety High-Leg Lace Boot Safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Anti-scuff toe protector Heel & ankle support Notched collar Drivers flex heel piece Double & quadruple stitched uppers Buckshot Rubber Outsole Breathable lining"

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Rubber anti-scuff toe protector Distinctive notched welt strip Wider fitting Triple stitched seams Punced collar Pull on loop K3 Rubber Outsole Breathable lining"

The Wagner Fence & Decking Sprayer is the quickest, easiest way to apply wood treatment in your garden. It will coat all types of wooden fences, sheds, decking or garden furniture for better looking, longer lasting surface protection. The gun is detachable, allowing easy change of attachment, paint, refill or to clean the gun. It has an extra fine atomisation for uniform paint coverage with a single coat. With 3 paint jet settings for horizontal, vertical or detailed spraying. The paint flow is fully adjustable for precision painting. Suitable for all standard solvent or water-based fence paint, oil, stain, varnish, wood preservatives and treatment. No need for specialist sprayable paint.

This fully adjustable Block Plane has a body made from fine grey iron which is precision machined. It is fully adjustable for depth of cut, cutter alignment and size of mouth. It is ideal for end grain and general-purpose fine finishing work and comes with a pouch for convenient storage. The precision carbon alloy steel blade is 40mm wide. Cutter seats at 21 degrees. Length: 6.1/4in. Cutter width: 1.5/8in.

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Reflective piping Anti-scuff toe protector Heel & ankle support Comfort insoles Buckshot Rubber Outsole Breathable lining"

Welded steel construction. 250 x 250mm platform. Rubberised feet provide slip resistance and floor protection. 80mm wide steps for extra comfort. Powder coated grey for neutral wipe clean protection. EN131 - 125Kg rating for - DOMESTIC USE ONLY.

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Rubber anti-scuff toe protector Distinctive notched welt strip Wider fitting Triple stitched seams Punced collar Pull on loop K3 Rubber Outsole Breathable lining"

The Einhell TE-MG 200CE Multi-Tool is a high-quality, compact and ergonomic tool for sawing, sanding, scraping and much more. The electronic speed control ensures smooth starting and enables the power to be adjusted exactly to the particular task. The soft grip provides a non-slip hold, while the extremely slim design makes it the ideal helper in hard-to-reach places. The dust extractor plus adaptor can be fitted without tools and keeps the air clean at all times, even during jobs with intensive dust development. The tool chuck of this versatile tool is adjustable, up to 12 settings for mounting various tools. A cable clip is provided for securing the wound-up cable neatly and safely in place after use. Comes with: 1 x Delta Sanding Disc, 6 x Abrasive Papers, 1 x Scraper, 1 x Plunge-Cut Blade for Wood and 1 x Hex Key. Specifications: Input Power: 200W. No Load Speed: 30,000-42,000/min. Oscillating Angle: 3°. Sandpaper Size: 93 x 93 x 93mm.

The Einhell TC-CS 1230 is a reliable, powerful DIY tool and is ideal for numerous cutting-to-size jobs in wood. The sawing depth and tilt angle of the saw can be adjusted without tools, and with the carbide blade, you can make cuts both with and across the grain. Fitted with a large, ergonomic handle, making it comfortable to hold and positive to guide. The splitter offers additional safety for users and material alike, preventing the blade from jamming. The parallel stop ensures an accurate cut and the sturdy galvanised soleplate, offers outstanding sliding properties for exact, continuous sawing. A connection for direct dust extraction is also provided. Supplied with: 1 x 160mm TCT Saw Blade, 1 x Parallel Guide and 1 x Dust Extractor Adaptor. Specifications: Input Power: 1,230 Watt. No Load Speed: 5,000/min. Blade: 160 x 16mm Bore, 24 Tooth TCT. Max. Cutting Depth: @90°: 55mm, @45°: 37mm.

"Safety Lace/Zip Boot Non-metallic safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Heavy service YKK zipper Reflective piping Anti-scuff toe protector Heel & ankle support with Kick-off heel spur Breathable lining and Comfort insoles Punched collar Velcro security flap Buckshot Rubber Outsole"

"Safety Lace/Zip Boot Non-metallic safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Heavy service YKK zipper Reflective piping Anti-scuff toe protector Heel & ankle support with Kick-off heel spur Breathable lining and Comfort insoles Punched collar Velcro security flap Buckshot Rubber Outsole"

Lightweight But Sturdy Aluminium Conforms To EN131 Safety Standard Up To 150kg (23.5 Stone) Load

"Safety Lace/Zip Boot Non-metallic safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Heavy service YKK zipper Reflective piping Anti-scuff toe protector Heel & ankle support with Kick-off heel spur Breathable lining and Comfort insoles Punched collar Velcro security flap Buckshot Rubber Outsole"

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Reflective inserts Anti-scuff toe protector Heel & ankle support Comfort insoles Buckshot Rubber Outsole Breathable lining"

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Waterproof uppers Reflective inserts Anti-scuff toe protector Heel & ankle support Comfort insoles Buckshot Rubber Outsole Breathable lining"

"Safety Lace Boot Safety toecap Anti-penetration midsole with penetration resistant outsole of 1100 Newtons Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Rubber anti-scuff toe protector Distinctive notched welt strip Wider fitting Triple stitched seams Punced collar Pull on loop K3 Rubber Outsole Breathable lining"

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

Strokes at No Load: 0-3,000/min. Stroke Length: 22mm. Sound pressure (LpA): 79.5 dB(A). Blade Length: Up to 30cm Long. Plus a 1.5Ah Li-Ion Battery.

The OX Pro Ultraflex Finishing Trowel 16" gives plaster surfaces the perfect finish with its 0.3mm ultra flexible blade, lightweight design, and comfort grip handle. Its unique twin blade technology and rounded corners help eliminate trowel lines. Its riveted handle offers added strength and durability. FEATURES Ultra-flexible 0.3mm stainless-steel blade providing the perfect finish Lightweight fully fastened shank for superior balance and strength Unique twin blade technology suitable for plaster finishing or smoothing concrete. Rounded corners to ensure a smooth finish Ergonomic soft grip handle to reduce fatigue and increase comfort

Faithfull Sledge Hammer for general use, ideal for builders and contractors. Both striking faces are precision ground, specially hardened and heat treated to withstand the highest impact applications. Virtually unbreakable fibreglass shaft with a soft-grip, non-slip handle and overstrike protection.

"Variable pitched bi-metal holesaw for multi-use. Features a smooth and fast cutting action. Aggressive penetration and swarf clearance."

Plier action roof slate tile cutter with spring loaded handles. This model also has a slate hole punch which operates by closing the handles. Approx length: 300 mm /12in. Features: Replaceable blade and punch. Punch diameter: 3.2 mm (1/8in). Cutting length: 35 mm per single pressure. Cutting width: 2.8 mm (0.109in).

The OX Pro 14" Semi Flex Plastic Finishing Trowel features tough but lightweight shank with a replaceable plastic blade. For ease of use and comfort, it comes with an ergonomic soft grip handle. FEATURES Replaceable plastic blade system Lightweight shank design Ergonomic soft grip handle

"Hardened steel hammer masonry drill bits for general purpose applications. SDS+ shank. Super flute spiral aids consistent drilling speed and efficient debris removal. Tungsten carbide tipped for longer life. Hardened steel body for extra strength and reduced breakage. Suitable for masonry, concrete and stone."

The OX Pro Ultraflex Finishing Trowel 14" gives plaster surfaces the perfect finish with its 0.3mm ultra flexible blade, lightweight design, and comfort grip handle. Its unique twin blade technology and rounded corners help eliminate trowel lines. Its riveted handle offers added strength and durability. FEATURES Ultra-flexible 0.3mm stainless-steel blade providing the perfect finish Lightweight fully fastened shank for superior balance and strength Unique twin blade technology suitable for plaster finishing or smoothing concrete. Rounded corners to ensure a smooth finish Ergonomic soft grip handle to reduce fatigue and increase comfort

Aluminium folding square with 90° and 45° for versatility of job applications. Ideal for large scale setting out of building profiles, foundations , floor tiling, paving etc. Durable yet lightweight aluminium construction. Folds into a single length for easy storage. Size: 48 x 48 x 68in (122 x 122 x 172cm)

The Monument GRIP+ Adjustable Basin Wrenches are ideal for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths. The teeth on the jaws will grip uneven shapes etc. The swivelling head allows access where fixed spanners will not operate and the solid steel handle has profiled end to allow attachment of socket and extension for longer reach. Correct heat treatment of all components ensures a long life. Made in Britain.

The Faithfull FAITRESTLESP is a pair of plastic trestles which fold flat for easy storage and transportation. The top features flip-up safety pegs to secure the workpiece and rubber inserts to prevent the workpiece slipping. They have non-slip rubber feet. Specifications: Height: 82 cm (32.1/4in). Length: 57 cm (22.1/2in). Width: 3cm (1.1/4in). Maximum recommended capacity: 158kg (348lb) per pair.

Conforms to DIN 3120 / ISO 1174. This excellent Bahco XMS offer contains: 18 x 1/2in Hex Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30 & 32mm. 2 x 1/2in Extension Bars: 125mm (5in) and 250mm (10in). 1 x 1/2in Universal Joint. 1 x 1/2in T-Adaptor. 1 x 1/2in Flexible Handle 250mm (10in). 1 x 1/2in Ratchet Handle 54-Teeth.

The Stanley Classic Box Levels have a strong construction to withstand demands of the worksite. Their soft end caps add durability and resistance to shock. The levels have a block magnified central vial to make reading easier. In addition, they have a large tubular side vial for vertical measurements. Accuracy: ± 0.5mm/m Length: 180cm.

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"BAZ Safety Lace Boot Lightweight composite safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Electrostatic discharge (ESD)"

"BAZ Safety Lace Boot Lightweight composite safety toecap Non-metallic NAIL STOP anti-penetration midsole with penetration resistant outsole of 1100 Newtons Antistatic Energy absorption seat region Heat & oil resistant rubber outsole Slip resistant - max test Electrostatic discharge (ESD)"

These Faithfull Ratchet Tie-Downs are manufactured from a 25mm wide triple layer Terylene webbing which is weatherproof, cut and abrasion resistant. The ratchet and S-style hooks ensure that loads are secured quickly and efficiently and provide ease of use. Manufactured in accordance to EN12195-2. Specification: Length: 5m Width: 25mm Breaking Strain: 600kg/daN Maximum Working Load: 300kg/daN NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT Pack quantity: 4.

For professional people who require their tools to be at hand on a regular basis, this purpose designed set comes complete with a heavy-duty blue waterproof Bailey carry bag and supplied with adjustable shoulder straps. The compact nature of this set allows them to be easily stored in the works, shed, garage or van. This Universal Drain Rod set includes 30 feet of the Bailey Blue Rods® with brass fittings. The quality, reliability and strength of this equipment ensures that the toughest jobs can be tackled - an essential product for the builder, plumber, chimney sweep or handyman. Contains: 10 x Blue Rods 3ft x 3/4in 1 x Plunger 4in 1 x Drop Scraper 4in 1 x Double Worm Screw

This 60 1/2 Block Plane features a low angle cutter seat at 13.5° and is fully adjustable for depth-of-cut, cutter alignment and size of mouth. The body is made from a fine grey iron. Particularly effective on end grain and plastic laminates. Supplied with a pouch for convenient storage. Cutter Width: 35mm. Length: 150mm (6in).

The OX Pro Stainless Steel Plasterers Trowel - 5in x 18in / 127 x 457mm's high-quality tempered stainless steel blade's edges have been pre-worn to eliminate line and ripple marks. Its lightweight aluminium shank is fully riveted for toughness. A DURAGRIP handle offers ultimate comfort and has been set for perfect balance. FEATURES Pre-worn edges to eliminate line & ripple marks High quality tempered stainless steel blade Lightweight aluminium shank - fully riveted Handle set for perfect balance Duragrip handle for ultimate comfort

FEATURES The general purpose blade with a 12mm segment All round performance Applications: building products, general purpose, kerbs and slabs, concrete paviors and blocks, roof tiles

The Faithfull Posthole Digging Bar manufactured from high-grade heat treated steel bar, with a round shank. It has a 60mm (2.3/8in) mushroom head at one end and a 64mm (2.1/2in) bevelled chisel edge at the other. Frequently used for digging deep post holes, and the mushroom head is used for tamping down.

The Olympia Tools® Circular Saw is fitted with a powerful 1,200W motor and an adjustable steel base for cutting bevels up to 45°. Its easy-to-handle design incorporates a soft grip handle for reduced fatigue. Supplied with: 1 x TCT Saw Blade 160 x 20mm, 1 x Parallel Cutting Guide, 1 x Hex Key and 1 x Pin Spanner. Specifications: Input Power: 1,200W. No Load Speed: 4,800/min. Max. Cutting Depth: @90° 52mm, @45° 37mm. Blade: 160 x 20mm Bore. Bevel Capacity: 0-45°.

The Merchant shares much of it's design with our bestselling wheelbarrow, the Contractor, but offers a tubular front support to improve weight distribution and increase the overall strength.

The IRWIN Jack Universal 880 Triple Ground Hardpoint Saw is fitted with a high-quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster-cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing 4X the added protection than conventional anti-rust agents. The handle is a proven design, light and strong with an ultrasonic welded soft grip for increased hold and enhanced comfort. 90° and 45° angles integrated in the handle aid the user when marking out. The Irwin Jack JAK880UN20 880 UN Universal Panel Saw comes with the following specification: Length: 500mm (20in) Teeth: 8 TPI

The Olympia Tools® Reciprocating Saw is fitted with a powerful 900W motor and an adjustable front shoe. A speed preselection wheel increases cutting control. Its easy-to-handle design incorporates a soft grip handle for reduced fatigue. Tool-less blade change ensures less downtime. Supplied with: 1 x Blade for Metal Cutting and 1 x Hex Key. Specifications: Input Power: 900W. Strokes at No Load: 0-2,800/min. Stroke Height: 20mm. Max. Cutting Depth: Wood 115mm, Steel 8mm.

These Faithfull heavy-duty 50mm wide ratchet straps are designed to secure really heavy loads. Manufactured from a 50mm wide triple layer Terylene webbing they are weatherproof, cut and abrasion resistant. The ratchet and J-style fixing hooks ensure that loads are secured quickly and efficiently and provide ease of use. Both the 5 and 8 metre lengths have a breaking strain of 4,000kg/daN and a working load of 2000kg/daN. Pack quantity: 1. Manufactured in accordance to EN12195-2. NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT. The Faithfull FAITDTRUCK52 has the following specifications: Length: 5m Width: 50mm Breaking strain: 4,000kg/daN Maximum working load: 2000kg/daN

The Stanley 0TR250 Heavy-Duty Staple & Nail Gun is fitted with an easy push handle penetrating the staple or nail into the workpiece with ease. The pinch point free design helps to protect cables so they do not to get crushed on application. This Stanley gun has an aluminium cast housing for greater durability and strength, is fitted with Hi/Lo adjustment to match density of materials and has easy access staple and brad insertion for faster loading. This staple and nail gun has a lock down handle system fitted for easy storage. It will accept heavy-duty staples and brads for multiple applications from cable laying, upholstery work, fencing, architrave fitting and much more. It will fire - STANLEY® Type-G staples in 6mm (1-TRA704T), 8mm (1-TRA705T), 10mm (1-TRA706T), 12mm (1-TRA708T) and 14mm (1-TRA709T) and STANLEY® Type-J Headed Brad Pins in 12mm (1-SWK-BN050T) and 15mm (1-SWK-BN625T).

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

Faithfull Tarmac Rake with 16 round teeth for evenly spreading loose stocks of tarmac. Fitted with a wooden shaft. Specification Head Width: 400mm (16in) Handle Length: 1.5m (60in)

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

"Professional TCT Blades featuring an alternate top bevel (ATB) tooth configuration for a professional finish and long cutting life. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Cooling slots to negate heat build up. Ideal for continuous use. Cooling slots also assist in clearing swarf. Body hardened and tempered to maintain trueness. Range includes blades from 150mm to 305mm diameter for coarse cutting through to fine cutting. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood. Suitable for wood with nails on blades up to 40 teeth."

The OX Pro Stainless Steel Plasterers Trowel - 5in x 14in / 127 x 356mm's high-quality tempered stainless steel blade's edges have been pre-worn to eliminate line and ripple marks. Its lightweight aluminium shank is fully riveted for toughness. A DURAGRIP handle offers ultimate comfort and has been set for perfect balance. FEATURES Pre-worn edges to eliminate line & ripple marks High quality tempered stainless steel blade Lightweight aluminium shank - fully riveted Handle set for perfect balance Duragrip handle for ultimate comfort

Voltage: 230V. Input Power: 720W. No Load Speed: 11,000/min. Disc Size: 115mm. Wire Cup Brushes: 60mm. Spindle Thread: M14.

Conforms to DIN 3120 / ISO 1174. Just look at what you are getting, the set contains: 12 x 3/8in Hex Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 & 22mm. 1 x 3/8in 60 Teeth Quick Release Ratchet. 2 x 3/8in Extension Bars: 75mm (3in) & 150mm (6in). 1 x 3/8in Universal Joint. 1 x 3/8in x 1/4in Bit Holder. 2 x 3/8in Spark Plug Sockets Hex: 16mm (5/8in) & 21mm (13/16in). 1 x 1/4in Spinner Handle, 2-Component Handle. 1 x 1/4in x 1/4in Bit Holder. 3 x 1/4in Slotted Bits: 4, 5.5 & 7mm. 4 x 1/4in Phillips Bits: PH1, PH2, PH3 & PH4. 6 x 1/4in Hex Bits: 3, 4, 5, 6, 7 & 8mm.

High quality adjustable, copper pipe cutter tool that ensures a square even cut. All parts liable to wear are heat treated. For copper, brass, aluminium and polyethylene, the fluted handle contains a spare wheel. It also has an integrated pipe-deburrer. No.1. Capacity 4 to 28mm. Spare wheel number MON273. Made in Britain. Capacity: 12 - 43mm

FEATURES Fast cutting unique diamond segment ensures swift and smooth cutting, making it easier and more accurate Suitable for wet and dry cutting of porcelain, stone and other hard tiles Mesh segment design ensures minimal chipping of material during cutting

"High speed steel drill bits for general purpose applications. Manufactured to DIN338 standards. 118° standard tip angle. Right hand cutting at 30°, Type N. Black finish. Suitable for drilling sheet metal, hard & soft wood and PVC."

The OX Pro Stainless Steel Plasterers Trowel - 4.5in x 11in / 114 x 280mm's high-quality tempered stainless steel blade's edges have been pre-worn to eliminate line and ripple marks. Its lightweight aluminium shank is fully riveted for toughness. A DURAGRIP handle offers ultimate comfort and has been set for perfect balance. FEATURES Pre-worn edges to eliminate line & ripple marks High quality tempered stainless steel blade Lightweight aluminium shank - fully riveted Handle set for perfect balance Duragrip handle for ultimate comfort

Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers.

The Einhell TC-AG 115 Mini Grinder is suitable for DIY enthusiasts who want a lightweight, handy tool provides good service on cutting, grinding and roughing jobs in the garden, workshop and garage. Fitted with a disk guard for high safety during operation and a spindle lock for fast and easy tool change. Equipped with a robust, flat metal gear head, which ensures good power transmission and is very helpful in places which are difficult to access. An additional handle that can be adjusted in two positions enables user-friendly and safe handling even during long work sessions. A flange nut wrench is also provided. Cutting Disk NOT Included. Specifications: Input Power: 500 Watt. No Load Speed: 12,000/min. Disc Diameter: 115mm.

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

The Faithfull Asphalt Rake has an all steel construction with 16 flat teeth and a long tubular steel handle. Used for spreading and raking asphalt evenly.

The Olympia Tools® Planer has a powerful 650W motor. Its soft grip handle fits securely in the hand and helps prevent fatigue. Fitted with a removable dust bag which keeps your working area clean and free from debris. Supplied with: 1 x Parallel Guide, 1 x Rebate Guide, 2 x Reversible TCT Blades, 1 x Hex Key, 1 x Spanner and 1 x Removable Dust Bag. Specifications: Input Power: 650W. No Load Speed: 16,000/min. Planing: Width 82mm, Depth 0-2mm. Rebating Depth: 0-10mm.

The Stanley Classic Box Levels have a strong construction to withstand demands of the worksite. Their soft end caps add durability and resistance to shock. The levels have a block magnified central vial to make reading easier. In addition, they have a large tubular side vial for vertical measurements. Accuracy: ± 0.5mm/m Length: 120cm

"A premium dry core bit with spiral barrel design for swift dust removal. Fast start segments. Side vents help keep the bits cool resulting in longer life. Suitable for use in masonry, brick, concrete with light or medium steel reinforcing. Also effective for granite, marble and stone."

"Professional TCT Blades featuring an alternate top bevel (ATB) tooth configuration for a professional finish and long cutting life. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Cooling slots to negate heat build up. Ideal for continuous use. Cooling slots also assist in clearing swarf. Body hardened and tempered to maintain trueness. Range includes blades from 150mm to 305mm diameter for coarse cutting through to fine cutting. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood. Suitable for wood with nails on blades up to 40 teeth."

"A right angle 25mm driver and magnetic bit holder to help loosen and tighten screws or fixings in the most inaccessible places. Helps you achieve the seemingly impossible. Suitable for all 1/4"" hexagon insert bits. Zinc alloy housing for high torque applications. 1/4"" Hex shank for quick release. Max 2000 min ⁻¹/rpm. Suitable for drills 10.8V - 18V."

"Professional TCT Blades featuring an alternate top bevel (ATB) tooth configuration for a professional finish and long cutting life. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Cooling slots to negate heat build up. Ideal for continuous use. Cooling slots also assist in clearing swarf. Body hardened and tempered to maintain trueness. Range includes blades from 150mm to 305mm diameter for coarse cutting through to fine cutting. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood. Suitable for wood with nails on blades up to 40 teeth."