Tools & Site Equipment

Scan 45 Piece Household & Burns First Aid Kit in weatherproof 4 pocket travel bag with handle and belt clips. Ideal for use in the home and outdoors. Suitable for burns, grazes, cuts and much more. Contents:

2 x Burn Relief Dressings (1 of each size): 2.5 x 5, 10 x 10cm
2 x Burn Blot Sachet 3.5g
1 x Sterile Medium HSE Dressing 12 x 12cm (unboxed)
10 x Assorted Clear Washproof Plasters
1 x Microporous Tape 1.25cm x 1m
1 x Finger Dressing with Adhesive Fixing 3.5cm
1 x Single Use Triangular bandage 90 x 127cm
3 x Sterile Low Adherent Dressing Pads: 5 x 5cm(x2), 7.5 x 7.5cm(x1), 10 x 10cm(x1)
1 x Conforming Bandage 5cm x 4m
2 x Sterile Dressings (1 of each size): 5 x 7.5, 7.5 x 10cm
2 x Single Pods Eye Wash 20ml
6 x Assorted Safety Pins
4 x Singled Packed Sterile Moist Saline Cleansing Wipes
1 x Pair of Stainless Steel Nurses Scissors 5in
1 x Pair of Vinyl Powder-free Gloves (Medium)
1 x Rebreath Mouth to Mouth Resuscitation Device with Valve
1 x First Aid Guidance Leaflet

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

The Stanley MaxSteel adjustable wrenches have a narrow head design for limited space applications and Laser-marked SAE and metric jaw scale for easy fastener size. The forged alloy-steel body increases strength and the extra wide jaw capacity opens wider than standard adjustable wrenches.

They have a bi-material handle for a comfortable grip. Ideal for automotive maintenance and repair, plumbing and general assembly tasks.

Stanley STA090949 Adjustable Wrench.

Size: 250mm (10 in).
Jaw capacity: 33mm.

The BlueSpot Ratchet Tie-Down Straps are designed for quick and easy securing and transporting of cargo. They are ideal for cars, trucks, boats, bikes and trailers. They feature a quick thumb release mechanism for easy adjustment and removal of strap. With vinyl coated S-hooks, metal buckle and wide nylon webbing that provides a secure hold without scratching.

Specification

Length: 4.5m.
Width: 25mm.
Load Capacity: 225kg.
Breaking Strength: 450kg.

These Scan Black PU Coated Gloves are made from knitted nylon with a seamless finish and a fine polyurethane coating over the palm and fingers. The back of the glove is uncoated to provide ventilation to the hand, avoiding perspiration and clamminess. These gloves are suited to work where a high level of dexterity is needed along with a good protection factor.

Typical applications include packing, inspection and fine component assembly operations.

Conforms to EN 388:2016 and EN ISO 21420 Standards.

Abrasion Performance Index (1-4): 4
Blade Cut Performance Index (1-5): 1
Tear Performance Index (1-4): 3
Puncture Performance Index (1-4): 1

The OX Pro Polyurethane Plasterers Hawk is made from a high quality lightweight material with sturdy construction for increased durability.

FEATURES

Lightweight sturdy construction
13" x 13" / 330 x 330mmm
Lightweight aluminium shank - fully riveted

The Vitrex Self-Adhesive Diamond Tile Drill Kits offer both the necessary lubrication to extend the life of the drill bit and secure positioning for quick and accurate drilling. Uses self adhesive pads for secure positioning and includes water delivery and collection cups for clean drilling.

Use when installing wall fixings through tiles in kitchens and bathrooms, for a wide range of fixtures such as shelves, towel rails or copper pipe.

The Vitrex 102771 Self-Adhesive Diamond Tile Drill Kit.

Bit Size: 8mm.

"Popular range of precision made blades designed for a variety of applications. Ideal for rough, fast cuts in hardwoods and softwoods."

The OX Pro 12'/300mm Taping Knife has a high quality stainless steel blade flexible blade mounted on a strong aluminium backing plate for maximum strength and is ideal for spreading compounds. The DURAGRIP soft but durable handle is comfortable to use and reduces fatigue.
FEATURES
High quality flexible stainless steel blade
DURAGRIP soft handle for extreme comfort
Strong aluminium back
10 inch / 250mm Blade

The Footprint Brick Bolsters are fully drop-forged, making them ideal for heavy-duty use such as cutting bricks and other general building uses.

The bolsters provide extra strength because the handle, blade and head are drop-forged as a whole rather than just forging the blade. The blade is specially hardened and tempered to provide a long-lasting edge.

The bolsters have a domed head which helps to extend the usable life by preventing splintering and mushrooming from continued use. They are fitted with a high-quality hand guard for added safety.

Manufactured to BS 3066.
Made in the UK.

Roughneck Brick Hammer manufactured from drop forged alloy steel, hardened and tempered and with a fully polished head. The tubular steel handle has a strong head to shaft connection.

The ergonomically designed grip is riveted to the handle for additional safety. Unique treble injected TPR soft grip handle for comfort during use and to reduce fatigue.

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

STANLEY Torpedo Level with a shock resistant, bi-material body and rubber end caps that protect finished work surfaces from damage. Its rigid aluminium frame has a V-groove edge that is ideal for pipework. The magnetic base allows for hands-free operation on metal surfaces. Fitted with 3 vials: horizontal, plumb and 45°.

Specification:

Length: 230mm (9in)

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

1/2in Shank

Cutting Diameter: 12.7 mm 1/2in.

Cutting Length: 63 mm.

Shank Diameter: 1/2in.

The Irwin IRW10507695 Folding Trapezoid Knife has a quick change mechanism that allows for easy blade removal and reversal without opening. It also has a built in wire stripper for convenience. The compact design is lightweight and durable with an extended thumb ledge that is made from stainless steel, to provide better handling.

The knife also features a safety lock, with a 45° angle quick change to prevent accidental release, and a built-in belt clip for convenient storage.

The IRW10507695 Irwin Folding Trapezoid Knife is supplied with 3 shatterproof Blue Blade Bi Metal Technology blades.

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

The Stanley FatMax® is a hardened and tempered blade for durability and long life.

The moulded handle combines high impact plastic and soft touch inserts for improved comfort and control.

The large smooth end pad to facilitate pushing and twisting the blade through plasterboard. Sharp point for piercing board, and aggressive triple bevel teeth for a faster cleaner cut.

Specifications:
Blade Length: 150mm (6in).
Teeth: 7 TPI.

The OX Pro Torpedo Level is ideal for levelling up in areas with limited access. Featuring three solid block vials with lifetime warranty, a strong aircraft grade aluminium profile for strength with fine milled lower edge incorporating rare-earth magnets and V-groove for accurate and easy placement on pipes and curved surfaces allowing hands free levelling.

FEATURES

Die-cast aluminium body
3 Solid block vials
Fine milled surface with V-groove
Rare earth magnets for strong grip to metal surface
Accuracy <.5" / " (.5mm/m)

Bahco ERGO™ Handled Engineering Flat File with a tapered shape for easier access into angles and corners. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. Suitable for general work on iron and steel. The surfaces have a double cut and the edge is single cut.


Specification:

Length: 200mm
Cut: Bastard
Width: 20mm
Thickness: 5mm
Teeth per cm: 10

FEATURES

Fast cutting universal blade, with 10mm segment
Features super fast turbo segment and cooling holes
Applications: concrete products, clay products, granite, engineering bricks, building products

The MEGABAG can hold up to 1.5 tonnes of weight – that’s the weight of a Ford Focus! Fill it to the brim, book your collection and we’ll be around to pick it up!

how it works

1 - Buy it
Order online from HIPPO now and we aim to deliver to your home the next working day: you can also get your pre-paid collection code at the same time. Alternatively, you can buy HIPPOBAGs online from all the great DIY stores.

2 - Fill it
Take your time, our HIPPOBAGs are flat-packed for easy storage, ready to fill, whenever you want. Don’t forget that, unlike some other waste companies, we’re happy to take your heavy waste: soil, rubble and bricks are no problem!

3 - Book it
When you’re ready for us to take it away, book a collection either using your pre-paid collection code or if you don’t have one, you can buy your collection online. Or, just give our friendly team a call.

4 - We collect
Contact free collection and thanks to our brilliant team of HIPPO drivers we’ll be there as quickly as we can.

**PLEASE NOTE** - PC Building Supplies Ltd is only a stockist of the HIPPO bags, we cannot collect or arrange collection on your behalf. you will need to contact HIPPO Directly.

The Faithfull Crutch Pattern Stopcock Key also has additional 1/2 and 3/4 in square valve fittings. Turning handle has one pointed end for lifting covers.

Length 114cm (44.3/4in).

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

The Stanley Precision Moulding Pry Bars are manufactured from forged and tempered high-carbon steel for safety and long life. With polished bevel claws, one has a wide flat surface to cleanly pry moulding and trim, thus reducing material damage. The contoured bar makes pulling, prying and lifting easier

1 x Stanley Precision Moulding Pry Bar 250mm (10in)

FEATURES

Standard black face for general work
Semi hard white face that will not mark or discolour
Strong and light fibreglass handle
Comfortable grip
Suitable applications include shaping, moulding or hammering materials

These Faithfull Metal Cutting Sabre Saw Blades are made from HSS Fully-Hardened Super-Speed Steel. Suitable for cutting applications in metal, aluminium and non-ferrous metals. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S918H Sabre Saw Blades are ideal for medium to thick sheet metal (3-8mm) fine, closed pipes and profiles (10-100mm).

Specification:

Length: 150mm (6in)
Teeth: 10 TPI

Bahco ERGO™ Handled Tapered Flat File for general work on iron and steel. Double cut on both sides and single cut on both edges. Tapered shape for easier access into angles and corners.

Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work.

This Bahco ERGO™ Handled Tapered Edge Flat File has the following specification:

Size: 200mm (8in)
Cut: Second
File Width: 20mm
File Thickness: 5mm
Teeth per cm: 15

Bahco Coping Saw ideal for cutting curves, slots and intricate shapes in many materials, wood, fibre board, plywood, plastic, laminates, glass fibre.

The blades can be turned through 360º to cut any curve, and can be easily tensioned through the twist action wooden handle.

Length: 165mm (6.1/2in).
Teeth: 14 tpi.

The Faithfull general-purpose Club Hammer with precision ground striking faces specially hardened and heat treated to withstand the most high-impact heavy applications.
Fitted with a fibreglass handle, with a rubber grip.

1 x Faithfull Club Hammer Fibreglass Handled 1.81kg (4 lb).

FEATURES
Forged chrome vanadium steel
Dual hand guard
Soft grip handle
For cutting breaking of concrete

The Monument Automatic Pipe Cutter is ideal for cutting copper pipe in confined spaces. A tough ABS housing covers the steel mechanism which takes any of the strain.

The pipe cutter is easy to use, it cuts once the gate of the tool is closed over the pipe, and allows cutting in two directions.

To ensure long life, occasionally dis-assemble the tool and clean away flux residues and other dirt. NOT for use on stainless steel.

Replacement Wheel Number MONW15PC.

Monument Automatic Copper Pipe Cutter.

Size: 15 mm.

FEATURES

Deeply grooved jaws for instant grip and ratcheting action
Tough robust construction
35mm / 14 inch
5mm Jaw Opening

Faithfull Lightweight Aviation Tinsnips manufactured to a high specification which includes a safety locking latch, strong opening spring and slip guards for protection on each handle.

Designed to cut up to 1. 2mm sheet steel, non-ferrous material, vinyls, plastic and rubber. Formed blades in satin finish are serrated to prevent sheet metal slipping.

Specification

Length: 250mm (10in).
Cutting Capacity: Sheet Steel: 1.2mm.

These Faithfull ;Compound Aviation Snips ;have the following specification:

Cut Type: Straight.
Length: 250mm (10in).
Cutting Capacity: Sheet Steel: 1.2mm.

FEATURES
8mm segment height.
Cuts all types of tiles, including granite and marble.

Manufactured to European standards<br>
Cleaned propane and butane gas for cleaner combustion and to improve the working environment<br>
Fully synthetic oil for reduced carbon deposition<br>
High quality propellant to prevent leakage and increase shelf life<br>
Gas filled in accordance with European Regulations (75/324/EWG)<BR>
Fuel Cell Quantity: 2<BR>
UFI Number: TVFS-62M4-J10Q-5PHF<BR>
First Fix

The Stanley Mole grips are a Straight Jaw Mole Grip which is suitable for gripping a wide variety of objects. The forged and machined jaws offer a maximum durability and the body is chrome plated to resist corrosion.

The knurled screw at the base of the handle adjusts the clamping pressure and the non-pinching pull jaw release lever improves safety and ease of opening.

These Stanley Tools Straight Jaw Locking Pliers have the following specification:

Length: 229mm (9in).

The Roughneck® Square Point Shovel is strong yet lightweight, with a fully hardened pressed steel construction. Treads on the blade allow for increased pressure to be applied with reduced risk of slippage.

The Power Ring socket, steel reinforced plug, provides stronger blade to handle connection. It has a fibreglass shaft for reduced overall weight, with a comfortable, double-injected D grip handle. Ideal as a general-purpose shovel for moving sand, gravel, cement, earth and for shovelling out and filling trenches.

Specification

Blade Width: 215mm
Overall Length: 914mm (36in)

The Roughneck® Square Point Shovel is strong yet lightweight, with a fully hardened pressed steel construction. Treads on the blade allow for increased pressure to be applied with reduced risk of slippage.

The Power Ring socket, steel reinforced plug, provides stronger blade to handle connection. It has a fibreglass shaft for reduced overall weight, with a comfortable, double-injected D grip handle. Ideal as a general-purpose shovel for moving sand, gravel, cement, earth and for shovelling out and filling trenches.

Specification

Blade Width: 215mm
Overall Length: 914mm (36in)

Specifications:

Clamping Capacity: 300mm (12in).
Spreading Capacity: 515mm (20in).
Clamping Force: 136kg.
Pack Quantity: 2.

The Monument Cutter Twin Pack contains the following:

1715C: Size: 15mm.
1722Y: Size: 22mm.

3 x Slotted Screwdrivers: 3.5 x 100mm, 4.0 x 100mm & 5.5 x 125mm.
2 x Phillips Screwdrivers: PH1 x 80mm & PH2 x 100mm.
1 x PlusMinus Screwdriver: SL/PZ2 x 100mm.

"Professional TCT thin kerf blades designed for cordless machines to reduce power drain. Thin kerf for increased efficiency and runtime on cordless machines. Quality blades featuring an alternate top bevel (ATB) tooth configuration for the professional tradesman. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Suitable for use on rip saws. Anti-kickback for smooth action & safety during use. Body hardened and tempered to maintain trueness. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood."

Bacho 10-21 Bowsaw is a lightweight yet heavy-duty bowsaw for all round use. The integrated, ergonomic handle, with its built in hand guard, protects user's knuckles.

A unique mechanism in the handle makes blade changing and tensioning adjustments effortless. The sturdy blade fittings and high blade tension make precision cutting easier than ever before.

51 code represents DRY cutting blade.
23 code represents WET cutting blade.

The Bahco 10-24-51 Bowsaw is supplied with a peg tooth blade, for dry cutting.

Specification

Size: 600mm (24in).

"Professional TCT thin kerf blades designed for cordless machines to reduce power drain. Thin kerf for increased efficiency and runtime on cordless machines. Quality blades featuring an alternate top bevel (ATB) tooth configuration for the professional tradesman. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Suitable for use on rip saws. Anti-kickback for smooth action & safety during use. Body hardened and tempered to maintain trueness. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood."

FEATURES

Made from solid forged carbon steel for ultimate strength
For use with OX scutch combs
Designed for preparation of masonry surfaces prior to rendering
Features the OX Grip

FEATURES
Made from forged chrome vanadium steel
Dual hand guard
Soft grip handle
For cutting splitting of bricks masonry

The Monument 358J Deep Box Immersion Spanner has an octagonal box ring at the base of a steel cylinder. The deep box design allows easy access to heaters that are surrounded by insulation or recessed. Supplied with a separate tommy bar.

The Monument Automatic Pipe Cutter is ideal for cutting copper pipe in confined spaces. A tough ABS housing covers the steel mechanism which takes any of the strain.

The pipe cutter is easy to use, it cuts once the gate of the tool is closed over the pipe, and allows cutting in two directions.

To ensure long life, occasionally dis-assemble the tool and clean away flux residues and other dirt. NOT for use on stainless steel.

Replacement Wheel Number MONW15PC.

Monument Automatic Copper Pipe Cutter.

Size: 22mm.

The Stanley MaxSteel adjustable wrenches have a narrow head design for limited space applications and Laser-marked SAE and metric jaw scale for easy fastener size. The forged alloy-steel body increases strength and the extra wide jaw capacity opens wider than standard adjustable wrenches.

They have a bi-material handle for a comfortable grip. Ideal for automotive maintenance and repair, plumbing and general assembly tasks.

Stanley STA090950 Adjustable Wrench 300mm.

Size: 300mm (12 in).
Jaw capacity: 39mm.

Bahco 332-21-51 ERGO™ Bowsaw is a lightweight, heavy-duty saw with high blade tension for straight cutting. The pointed nose for better access in tight areas, such as roofing and gardening.

Made from high-quality steel and protected from rust and corrosion by a coating of high-impact enamel paint, and has an innovative easy-to-use mechanism that allows for maximum tension and safe handling.

Integrated knuckle protector for protection of the hand

Size: 530mm (21in).

These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights.

The malleable iron head is fitted with one hide and one copper face on a polished wooden handle.

(No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)

Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.

Size: 2
Weight 1070g (2.1/2lb).
Diameter 38mm (1.1/2in).

The Roughneck Ratcheting Bar Clamp and Separator has an easy change mechanism to convert from clamp to spreader.

The clamp allows fast, one handed operation and has extra large pads for better grip and for protecting the work area. The clamp has a clamping force of up to 150kg.

Clamp Capacity: 150mm (6in)
Spread Capacity: 340mm (13in)

Bahco 2-in-1 ERGO™ Homeowner's Metal File with a two-component handle for maximum comfort and excellent grip. Developed according to the scientific ERGO™ process. With 2 different filing surfaces:

Double cut: rough sharpening of edges on spades, hoes, mower blades, axes, etc.
Single cut: fine sharpening of edges on above implements and on knives and scissors

Specification:

Shape: flat, parallel, with 2 flat, uncut edges
Length: 200mm (8in)

Faithfull Plug Cutters are used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes. For best performance, the power drill should be held in a stand. For a perfect grain match use an offcut from the timber being plugged. To ensure an accurate fit we suggest you use the same screwsink from the Faithfull brand.

The set of 4 contains sizes No 6, 8, 10 and 12.

Set of Four - Cuts size 6 (7mm), 8 (8mm), 10 (10mm) and 12 (11.5mm) Plugs

Convenient three piece set consisting of sharpening stone , bottle of lubricating oil and a honing guide. Guides the user to achieve a precise sharp edge that is square to the blade. Angle setting gauge with pre-set markings of 25°, 30° or 35°.

"Variable pitched premium 8% cobalt holesaw for professional use. 8% cobalt for resistance and long life. Features a smooth and fast cutting action. Precision set teeth for aggressive material penetration and swarf clearance. 38mm cutting depth. Enhanced heat and wear resistance for greater product life. Will cut thin and thick gauge materials. Suitable for cutting stainless steel, steel, aluminium, sheet metal, metal/mild metal, non-ferrous metals, cast iron, hard/soft wood and PVC."

Vitrex Standard Diamond Blade with a continuous rim for a cleaner cut. Suitable for cutting ceramic, terracotta and quarry tiles, slate, marble, masonry, concrete and stone.

Wheel supplied with 22mm dia bore, and is supplied with a 16mm brass reduction ring.

For use with Vitrex 103402NDE.

Diameter: 110mm.

Vitrex Glass Diamond Blade for cutting glass tiles. Precise diamond arrangement and alignment on each blade, to control wear and increase cutting speed.

In some situations, this technology can increase the cutting speed by 50% while doubling a normal blades life.

Designed for use with the Vitrex 103402NDE.

FEATURES

Forged and machined jaws for ultra strong grip on multiple surface shapes
Ideal for gripping pipes and bolts
Chrome plated durable body
Quick jaw release lever for ease of opening
23mm / 9 Inch

"Professional TCT thin kerf blades designed for cordless machines to reduce power drain. Thin kerf for increased efficiency and runtime on cordless machines. Quality blades featuring an alternate top bevel (ATB) tooth configuration for the professional tradesman. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Suitable for use on rip saws. Anti-kickback for smooth action & safety during use. Body hardened and tempered to maintain trueness. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood."

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 12.00mm.
Working length: 101mm.
Overall length: 151mm.

Manufactured from hard silicon carbide abrasive, rubbing bricks are used for heavy-duty applications such as rubbing floors, cleaning and scouring castings, rubbing down concrete, and removing mould marks. Available in a plain or fluted version.

Most commonly used to clean or dress floor
tiles and concrete floors.
Type: Fluted
Size: 200 x 50 x 50mm (8 x 2 x 2in)

This Faithfull Lead Dresser is used when moulding or dressing sheet lead, copper, zinc, aluminium and other ductile material.
Lead dressers have rounded corners with a raised handle to provide sufficient clearance for the user’s knuckles when hammering.
The lead dresser is durable, manufactured from tough high density plastic to withstand hammering on the top, or sides.

The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces.

The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified.

Not for use on stainless steel.

Made in Britain.

Bahco 2-in-1 ERGO™ Homeowner's Wood File with a two-component handle for maximum comfort and excellent grip. Developed according to the scientific ERGO™ process. With 2 different filing surfaces:

Rasp cut: rough filing of wood, plywood, soft plastics, etc.
Double cut: fine filing of metals, iron and plastics, etc.

Specification:

Shape: flat, parallel, with 2 flat, uncut edges
Length: 200mm (8in)

This 7 piece Faithfull Multi-Function Tool Blade Set contains a selection of the most popular blades for cutting wood, man-made boards and metal and removing grout. Compatible with many multi-function oscillating power tools.

The set comprises of:

3 x Multi-Function Tool CrV Flush Cut Wood Blades Side Set, 2 x 34mm and 68mm.
This fast-cutting saw blade has a broad range of applications with ground, side set hardened teeth. Quick cutting performance in softwood, plastics, plasterboard, plastic pipes and similar materials.

2 x Multi-Function Tool Bi-Metal Flush Cut Wood/Metal Blade 22mm.
The HSS wavy set teeth on this bi-metal blade make it ideal for sawing wood, copper and aluminium pipes, sheet metal, plastics and profiles. Ideal for many flush cutting applications and plunge cutting in plasterboard.

1 x Multi-Function Tool Bi-Metal Radial Blade Wood/Metal 87mm.
The HSS wavy set teeth on this bi-metal blade make it ideal for sawing wood, copper and aluminium pipes, sheet metal, plastics and profiles. Ideal for cutting veneered and laminated boards as well as parquet in flooring and partition wall applications.

1 x Multi-Function Tool Radial Carbide Grit Blade 65mm.
Ideal for a broad range of applications with carbide grit edge. Cuts tiles, plaster, porous concrete and similar construction materials. Suitable for cutting out damaged tile joint and for cutting grooves in plaster, porous concrete and similar construction materials.

"High speed steel drill bits for general purpose applications. Manufactured to DIN338 standards. 118° standard tip angle. Right hand cutting at 30°, Type N. Black finish. Suitable for drilling sheet metal, hard & soft wood and PVC."

The Stanley MR77 all-steel riveter has a head that rotates 360° for use at any angle. It has 4 nosepieces and a wrench store in its handle for versatility and convenient storage.

It accepts 3, 4, and 5mm aluminium and steel rivets for a wide range of applications.

Faithfull Slaters Ripper for sliding under slates to pull out or sheer off fixing nails prior to replacing with new slates. Features a flexible steel blade with PVC grip.

These Faithfull Metal Cutting Sabre Saw Blades are made from Bi-Metal, Bi-metallic blades contain eight percent Cobalt M42, and are particularly suitable for materials that are hard to cut. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved.

Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.

The Faithfull S1118BF Saber Saw Blades are ideal for pallet repair, with nails/metal (5-150mm), sheet metal, pipes, aluminium profiles (3-12mm). They have a flexible flush cut.

Specification:

Length: 200mm (8in)
Teeth: 10 TPI

The Vitrex 10 2430 Tile Nipper / Cutter has tungsten carbide tipped jaws for cutting and shaping wall tiles. It is ideal for awkward shaped cuts around pipes, switches, sills and fittings.
It has a soft feel handle for extra grip and comfort.

FEATURES
• Guaranteed to cut all construction products including metal
• Excellent fast cut universal & hard materials
• Reinforced flange
• Cooling holes
• Semi-transparent
• Applications: granite, natural stone, clay products, engineering bricks, metal, concrete products, all building materials. Wear will increase on abrasive materials

The Hultafors TC Curved Claw Hammer is forged in one piece for increased durability. Fitted with a vibration damping urethane plug. The thin, strong claw provides easy access without leaving marks. In addition, it is rounded to prevent it tearing your trousers. Ergonomically designed handle with clear end stop and a secure grip.

he Olympia Tools® Multi-Sander has a powerful 130W motor and uses a hook & loop sanding sheet fastening system. Its ergonomic, soft grip handle makes it easy to hold and provides precise handling. Fitted with a dust collection box to keep your working area clean and free from debris.

Supplied with: 3 x Sanding Sheets and 1 x Removable Dust Box.

Specifications:

Input Power: 130W.
Oscillating Speed: 14,000/min.
Orbit Diameter: 1.6mm.
Sand Paper Size: 140 x 140 x 80mm.

NOT FOR SALE TO PERSONS UNDER 18 YEARS OF AGE. BY PLACING AN ORDER FOR THIS PRODUCT, YOUR ARE DECLARING YOU ARE AGED 18 OR OVER.ID WILL BE REQUESTED UPON COLLECTION OR DELIVERY.

These Faithfull Screwsinks can be used for drilling, countersinking and counter-boring in one operation. The countersinking part can be slid up and down the drill part of the tool by means of a hexagon key to suit the depth of hole being drilled.

To ensure an accurate fit, it is suggested that the corresponding plug cutter is used from the Faithfull range.

Each screwsink is supplied with a hexagon key.

Set of 4 Containing: No.6 (7mm), No.8 (8mm), No.10 (10mm), and No.12 (11.5mm).

"Professional TCT thin kerf blades designed for cordless machines to reduce power drain. Thin kerf for increased efficiency and runtime on cordless machines. Quality blades featuring an alternate top bevel (ATB) tooth configuration for the professional tradesman. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Suitable for use on rip saws. Anti-kickback for smooth action & safety during use. Body hardened and tempered to maintain trueness. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood."

"Popular range of precision made blades designed for a variety of applications. Variable tooth spacing for cuts in different materials, flexible and shatter-proof. For cutting metals, woods with nails and synthetics."

Scan Professional Gel Kneepads are top of the range, made using 13mm thick high-density cell foam with an 'Ultra' comfort gel inner pad for increased comfort in use. Typical applications include kneeling on uneven surfaces, laminate flooring, roofing work, concrete and laying patios etc.

They feature oversized caps - which give added protective coverage to the knee - and have 2 adjustable fastening straps for added comfort and security.

The lower strap is a fully adjustable neoprene strap with a hook and loop fastening and it secures below the knee for all-day comfort. The top strap is elasticated and fully adjustable via means of a quick clip buckle.

Conforms to EN 14404 standard.

The Monument Wide Jaw Adjustable Wrench has a plastic rubber cushion handle, which is permanently adhered to the shank of the tool. Its soft, anti-slip material ensures a comfortable and strong grip.

The jaw configuration of the wrench results in a stronger and better 'tool to fastener' contact point, providing a substantially durable tool.

Made from Chrome Vanadium Steel with a Phosphate finish.

The Monument Wide Jaw Adjustable Wrench has the following specification:

Length: 150mm (6in).
Jaw Capacity: 34mm.

The Stanley Classic Box Levels have a strong construction to withstand demands of the worksite. Their soft end caps add durability and resistance to shock.

The levels have a block magnified central vial to make reading easier. In addition, they have a large tubular side vial for vertical measurements.

Accuracy: ± 0.5mm/m

Length: 60cm.

The IRWIN Vise-Grip Max Leverge End Cutting Pliers feature PowerSlot Technology, that provides 2X more power and half the cutting effort. They are constructed of high-quality steel and are specially coated for superior rust-resistance and longer tool life. The induction-hardened cutting edges are durable enough to cut ACSR, nails, screws and even piano wire without damaging the cutting edge.

They are fitted with industry-leading, three-zone comfort grips that have been contoured for optimal cushion and control allowing the user to make more cuts comfortably. Integrated handle hooks for the Performance Lanyard system, for safer elevated working conditions and easier retrieval when stored.

They are made in Germany and backed by IRWIN's Lifetime Guarantee.

Capacity: 3mm Hard Wire.

Bahco ERGO™ Handled Half-Round File with a tapered shape for easier access into angles and corners. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work.

This Bahco ERGO™ Handled Half-Round File has the following specification:

Size: 200mm (8in)
Cut: Second
File Width: 20.5mm
File Thickness: 6mm
Teeth per cm: 15

The OX Pro Notch Trowel 115 x 280mm with 6mm notch is used to spread adhesive with even and accurate placement during the tiling process. Featuring a heavy duty aluminium shank with comfort soft grip handle and strong carbon steel blade for strength.

FEATURES

Carbon steel blade
Aluminium heavy duty shank
DURAGRIP handle for comfort

The Monument Drain Auger comes with a hollow spring 1/4in diameter wire cable with a bulbous head for unblocking sinks, urinals, and small drains etc.
The rotating crank handle, with thumbscrew, fits over and locks the cable and can be entered through strainers.
The 3344K drain auger can also be used without the handle as a refill for the MON3313.

Specifications:

Length: 7.5m (25ft) long retractable.
Diameter: 6mm (1/4 in).

The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces.

The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified.

Not for use on stainless steel.

Made in Britain.

Monument MON1722 Autocut Pipe Cutter.

Size: 22mm.

The Bahco 244+ Barracuda Handsaw is a high-quality general purpose hard point saw suitable for cutting softwood, worktops, chipboard and MDF.

The Super sharp toothing and thicker blade offer faster cutting with improved stability and precision during use and the screwed 2-component handle can be used for approximate 45° and 90° marking guides.

This Bahco 244P-20-U7-HP Barracuda Handsaw has the following specification:

Blade Length: 500mm (20in).
Tooth Pitch: 7 TPI.
Type: Universal hard point.

"Professional TCT Blades featuring an alternate top bevel (ATB) tooth configuration for a professional finish and long cutting life. Unique 'gold' coating creates ultra low friction and wear resistance. Reamed bore ensures precise fit to spindle. Front bevel tooth form for a superior quality of cut. Cooling slots to negate heat build up. Ideal for continuous use. Cooling slots also assist in clearing swarf. Body hardened and tempered to maintain trueness. Range includes blades from 150mm to 305mm diameter for coarse cutting through to fine cutting. Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood. Suitable for wood with nails on blades up to 40 teeth."