Tools & Site Equipment

Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact.

Designed to drive nail heads below the surface of the wood.

Point Diameter: 5mm (3/16in)
Length: 100mm (4in)

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140.

Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.

1 x Pack of 1000 Stanley TRA708T Heavy-Duty Staples 12mm

Monument pipe cutter wheels are made from high quality, heat treated steels.

Suitable for both 268 and 289 pipe slices 15 mm and 22 mm copper tube and MON 240C and MON 303 21 mm and 28 mm.

The Masterlock Twin Wire Bungee Cord offers twice the strength of an ordinary bungee and its rounded hooks eliminate the risk of scratching.
The reverse hook bends away allowing more room to attach.
TUV certified.

The MasterLock Twin Wire Bungee Cords have the following specification:

Length: 60cm.
Diameter: 8mm
Resistance Limit: 40kg.
Colour: Red.
Quantity: 2 Piece.

Faithfull Centre Punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.

Point Diameter: 2.5mm (3/32in).
Length: 100mm (4in).

Faithfull Centre Punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.

Point Diameter: 3mm (1/8in).
Length: 100mm (4in).

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

Tungsten carbide cutting edges and bearing guided, making these trimmers ideal for professional and DIY use. Used when trimming timber, lippings and plastic laminates.

Type: Flush Trimmer 2 flute

Cutting Diameter: 6.3 mm 1/4in

Cutting Length: 25.4 mm

Shank Diameter: 1/4in

This Stanley Line Level 042287 is used for setting out levels over large areas where precision is of secondary importance e.g., ideal for landscape gardening.
It has a lightweight metal body for long life and includes hooks for using on string.

Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact.

Designed to drive nail heads below the surface of the wood.

Point Diameter: 4.0mm (5/32in)
Length: 100mm (4in)

A range of straight wooden broom handles supplied in a variety of lengths and diameters to fit most broom heads.

Length: 1525 cm (60in)
Diameter: 28 mm (1.1/8in)

Fits the following Faithfull brooms:
FAIBRBC13FL - BASSINE FLAT 325mm
FAIBRBC13SA - BASSINE SADDLEBACK 325mm
FAIBRPVC13FL - PVC FLAT 325mm
FAIBRPVC13SA - PVC SADDLEBACK 325mm
FAIBRSQUE18 - SQUEEGEE 450mm
FAIBRSQUE24 - SQUEEGEE 600mm

These Bahco Bowsaw Blades are ideal for cutting in dry seasoned wood. Made from hardened and tempered high quality steel with high frequency, induction hardened peg toothing.

They have been treated with a rust prevention coating and packed in individual sleeve printed with graphically illustrated text for correct blade selection.

Will fit most makes of bowsaw frame.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 4.50mm.
Working length: 47mm.
Overall length: 80mm.

These Stanley Snap-Off Blades have a straight cutting edge and fit Stanley snap-off knives.

Available Sizes: 9mm, 18mm and 25mm.

The 25mm blades are 1mm thick and have been specifically designed for intensive use.

These Stanley Snap-Off Blades are 9mm and have 12 snap-off segments. They are suitable for use with the following 9mm snap-off knives: STA010475, STA010409, STA010095, STA010150, STASTTKQ109.

Pack of 10.

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

This Faithfull Aluminium Triangular Scale Rule is graduated with six different scales for precision drawing. (1:20, 1:25, 1:50, 1:75, 1:100, and 1:125). The graduations are clear and easy to read.
The unique triangular profile keeps fingers well away from any knife edge when used for cutting or scoring card etc.

Specification:

Length: 300mm (12 in).

These Stanley Snap-Off Blades have a straight cutting edge and fit Stanley snap-off knives.

Available Sizes: 9mm, 18mm and 25mm.

The 25mm blades are 1mm thick and have been specifically designed for intensive use.

These Stanley Snap-Off Blades are 18mm and have 7 snap-off segments. They are suitable for use with the following 18mm snap-off knives: STA010481, STA010418, STA010018, STA010280, STA010151, STASTTKQ118.

Pack of 5.

FEATURES

Made from 100% polyester
Velcro front fastening and conforming reflective tape
Conform to EN471 Class 2

The Faithfull, robust, L-shaped, plastic Line Blocks are a simple tool quickly adjusted under tension for length and height to ensure courses of bricks are running straight and true.
They feature built-in line storage and are supplied with 18 metres of orange polyethylene brick line.

Specifications:

Material: Plastic.
Length: 18m.

Mandatory Signs are a Blue circle containing a white image denoting that a specific course of action must be taken. These signs help workers and members of the public instantly understand what course of action is required of them, using simple verbal commands and easily recognisable icons

• Fire door action signs provide essential, detailed information in the event of a fire
• Available in a range of sizes and materials
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry surface <

Mandatory Signs are a Blue circle containing a white image denoting that a specific course of action must be taken. These signs help workers and members of the public instantly understand what course of action is required of them, using simple verbal commands and easily recognisable icons

• Use to highlight areas in and around your facility that the relevant PPE must be worn
• Available in a range of sizes and materials
• Designed and manufactured in the UK
• Self adhesive backing
• Making it easy to apply to a clean dry surface <

FEATURES

Made from 100% polyester
Velcro front fastening and conforming reflective tape
Conform to EN471 Class 2

FEATURES

Made from 100% polyester
Velcro front fastening and conforming reflective tape
Conform to EN471 Class 2

FEATURES

Made from 100% polyester
Velcro front fastening and conforming reflective tape
Conform to EN471 Class 2

FEATURES

Made from 100% polyester
Velcro front fastening and conforming reflective tape
Conform to EN471 Class 2

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 10mm.
Working Length: 80mm.
Overall Length: 130mm.

Universal Drop Scraper which glides over small obstructions and drops into a vertical scraping position to allow offending material to be dragged back towards the operator.

Size: 6 in.

"High quality impact resistant 50mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

This Faithfull heavy-duty scratch brush is aimed at the professional user and is capable of extended use in difficult environments.

Wire gauge is 28, hardened and tempered.

4 Row.

Faithfull Twisted Nylon Chalk Lines are ideal for most applications in the building trade and can be used as chalk or brick lines.

Used with coloured powdered chalk to mark between two points to give a straight line.

Twisted nylon line is cheaper than braided.

To stop the line fraying at the end hold over a lighted match for a few seconds to melt and weld the ends together.

Length: 36 metres

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 5.0mm.
Working length: 52mm.
Overall length: 86mm.

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts.

Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.

Tungsten carbide cutting edges are ideal for DIY and professional use. Produces the perfect radius groove on coving, fluting, picture frames and edge moulds when working with softwoods, hardwoods, MDF and plywood.

1/4in Shank.

Cutting Diameter: 10mm

Cutting Length: 18mm.

Radius: 5mm

Shank Diameter: 1/4in

The OX Trade 5M/ 16FT Tape Measure comes in a DURAGRIP molded rubber case with a 25mm wide nylon-coated steel blade with both metric and imperial markings. Features shock absorbing blade return bumper and easy slide thumb lock.

FEATURES

Duragrip moulded rubber case
Nylon coated steel blade
Shock absorbing blade return bumper
Quick release bottom strip
25mm wide blade, 5m length, metric and imperial

Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.

Stanley Hex Key Set manufactured from High Tensile steel for strength and resilience.

Comes in folding open case.

Set of 8 Keys.

The 0-69-251 Metric set has the following sizes: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm.

Stanley Hex Key Set manufactured from High Tensile steel for strength and resilience.

Comes in folding open case.

Set of 8 Keys.

Teh 0-69-252 Imperial set has the followng sizes:

1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4in.

Spare jaws to fit all Monument adjustable wrenches.

Monument 350L.

Size small: 28.5mm (1.1/8 in).

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140.

Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.

1 x Pack of 1000 Stanley TRA709T Heavy-Duty Staples 14mm

The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability.

The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.

Type - Flared
Tip Size 4.0mm
Blade Length 100mm (4 in)

The Masterlock Twin Wire Bungee Cord offers twice the strength of an ordinary bungee and its rounded hooks eliminate the risk of scratching.
The reverse hook bends away allowing more room to attach.
TUV certified.

The MasterLock Twin Wire Bungee Cords have the following specification:

Length: 80cm.
Diameter: 8mm
Resistance Limit: 40kg.
Colour: Green.
Quantity: 2 Piece.

Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.

The Vitrex 10 2420 Grout Rake has a tungsten carbide grit edged blade for longer life. It is fitted with a durable nylon handle designed for extra grip.
This Grout rake is used for removing old and discoloured grout.

These Vitrex 10 2080 Tile Marking Pencils are suitable for marking out tiles, glass, plastic and metal. They are not suitable for porous or porcelain tiles.

Pack of 2, one red and one black marker.

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

Orange polyethylene ranging line is heavier gauge than the brick line and is commonly used for marking out ground on building sites.

Length: 30 metres

Type: Orange Polyethylene

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

"Popular range of precision made blades designed for a variety of applications. Hard and soft woods to 60mm, plastics to 50mm and acrylglas to 30mm. Fast coarse cut."

The Vitrex 10 2116 Tile File has a tough, aluminium oxide coating. Smooth's sharp and uneven edges on cut tile.

Specifications:

Size: 6 x 2.1/2in.
Pack Quantity: 2.

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

"Precision engineered flat bit for fast and exact cutting. Features double side spurs providing cleaner holes and reduces vibration. Designed to ensure faster and easier drilling. 1/4"" Hex quick change shank. Side scoops optimise removal of woord chippings. Suitable for general use in drilling wood, plastic and plasterboard."

The Faithfull Bradawls are used to make pilot holes for screws in wood. Available in 2 versions - one with a tapered square tip (also known as a birdcage awl) for faster penetration of wood, and one with a traditional chisel tip. Fitted with comfortable soft grip handles.

The FAIBRADSQ Bradawl has a tapered square tip.

Using a push and twist action, the square shape continuously reams the hole instead of pushing and reaming like a chisel tip bradawl.

Blade Length: 50mm
Blade Diameter: 3mm

The Faithfull Bradawls are used to make pilot holes for screws in wood. Available in 2 versions - one with a tapered square tip (also known as a birdcage awl) for faster penetration of wood, and one with a traditional chisel tip. Fitted with comfortable soft grip handles.

The FAIBRADCP Bradawl has a chisel tip.

The traditional chisel tip bores a clean hole when used with a push and twist action.

Blade Length: 50mm
Blade Diameter: 3mm

Scan Tapered Foam Earplugs made from soft energy absorbing polymer foam, which compresses and then expands for a perfect fit in the ear canal with the benefit of attached cords to avoid dropping or loss and are visible in use. Reduces sound levels to the ear drum while maintaining aural contact. Easy insertion and removal. Supplied as 6 pairs, in 3 re-sealable containers each with 2 pairs of earplugs.

Conforms to EN352-2:2002.

SNR = 38dB (Single Number Rating (SNR) = the number of decibels reduced by the product).

The Vitrex 10 2075 Tile Scribe has a tungsten carbide tip and is suitable for scoring wall and floor tiles.

The Stanley Interlock Snap-Off Blade Knife has a die-cast metal body that is solvent resistant. The durable patented wedge lock action holds the blade securely in position. A simple finger screw action operates the locking mechanism. Suitable for heavy-duty cutting. The knife can be opened and cleaned, making it ideal for applications where material build-up is a problem.

These Faithfull Laminated/Wood Jigsaw Blades, in a pack of five, are a clean, precise, straight down cutting blade.
The T101BR are ideal for hardwood, softwood, laminated boards, fibre boards, and plastics.

Specifications:

Type: Carbon Steel ('T' shaft).
Cutting length: 75mm.
TPI: 10.
Quantity: Pack of 5.

Scan High-Visibility Yellow Waistcoat with panels that reflect light to maximise visibility, particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

Scan High-Visibility Yellow Waistcoat with panels that reflect light to maximise visibility, particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

Scan High-Visibility Orange Waistcoat with panels that reflect light to maximise visibility particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

Scan High-Visibility Orange Waistcoat with panels that reflect light to maximise visibility particularly during the hours of darkness. Made from 100% polyester with retro-reflecting tape that absorbs and reflects light and is finished with black bound edging. Hook and loop strip for front fastening.

Conforms to standard EN 20471 Class 2.

The Stanley FatMax® Parallel tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to shaft for a virtually unbreakable bond which gives long life and durability.

The soft grip handle provides great grip and reduced fatigue in use. Colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.

Parallel tips are ideal if the screw needs to be driven below the material surface.

Type - Parallel
Tip Size 3.5mm
Blade Length 75mm (3 in)

These Faithfull Drywall Screwdriver Adaptors are suitable for use in handheld drivers or power drills for driving screws into drywall.

The 1/4in shank adaptor features a pre-set recessed collar and fitted PH2 bits, ready for use in all drywall applications.

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

"Extremely high quality, durable and long life multi-purpose drill bits for cutting through all materials. Robust and reliable, long life multi-purpose drill bits that give outstanding performance. 120° diamond ground, carbide tip for long life and even faster drilling even in hard materials. Steep aggressive u-type flute gives optimal waste removal. Suitable for use in all materials including wood, masonry, tiles, aluminium, cast iron, steel, corian and hard & soft plastic."

The OX Pro Chalk Powder (red), contained in a refillable easy-pour container, is formulated for good adhesion and high visibility and can be used for both interior and exterior use. Comes in four different colours: white, red, yellow and blue.

FEATURES

Powder formulated for good adhesion and high visability
For both interior & exterior use
For use with chalk lines
Easy pour, refillable bottle
Red Colour, 226 Grams

The OX Pro Chalk Powder (blue), contained in a refillable easy-pour container, is formulated for good adhesion and high visibility and can be used for both interior and exterior use. Comes in four different colours: white, red, yellow and blue.

FEATURES

Powder formulated for good adhesion and high visability
For both interior & exterior use
For use with chalk lines
Easy pour, refillable bottle
Blue Colour, 226 Grams

The OX Pro Chalk Powder (yellow), contained in a refillable easy-pour container, is formulated for good adhesion and high visibility and can be used for both interior and exterior use. Comes in four different colours: white, red, yellow and blue.

FEATURES

Powder formulated for good adhesion and high visability
For both interior & exterior use
For use with chalk lines
Easy pour, refillable bottle
Yellow Colour, 226 Grams

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 3 mm
Length 60 mm

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 4 mm
Length 60 mm

Supplied as a twin pack, 2 pairs included.

Material: 80% cotton, 17% polyamide, 3% elastane.

Size: L.

These Scan Work Socks have a reinforced heel and toe with an ergonomic shape for optimum fit. The non-slip bridge helps to keep the sock in position for added comfort.

Supplied as a twin pack, 2 pairs included.

Material: 80% cotton, 17% polyamide, 3% elastane.

3 Pairs of Scan Orange/Black Knitshell Thermal Gloves. These high-visibility gloves have a black latex wrinkle finish coating to the palm and fingers. They give excellent grip in both wet and dry conditions. Ideal for the construction, automotive and handling industries.

Conforms to EN ISO 21420 and EN 388.

The Faithfull Churn Brush is versatile and hard wearing brush originally designed for the cleaning of milk churns but now used in preparing and cleaning brickwork and masonry.

260mm (10in).

The Stanley Tylon™ Pocket Tape has a corrosion resistant, long-life Tylon™ coated blade with positive blade lock for accurate measurements. Shows both metric and imperial graduations. Fitted with a Tru-zero hook, that compensates accurately for internal and external measurements, with triple rivet construction for improved strength and durability. The impact resistant ABS plastic case is fitted with an ergonomic overmould for all day comfort.

This Stanley Tylon™ Pocket Tape has metric and imperial graduations, and is supplied Carded.

Blade Length: 3m/10ft
Blade Width: 12.7mm
Accuracy: EC Class II

The Masterlock Twin Wire Bungee Cord offers twice the strength of an ordinary bungee and its rounded hooks eliminate the risk of scratching.
The reverse hook bends away allowing more room to attach.
TUV certified.

The MasterLock Twin Wire Bungee Cords have the following specification:

Length: 100cm.
Diameter: 8mm
Resistance Limit: 40kg.
Colour: Yellow.
Quantity: 2 Piece.

"25mm quality driver bits ideal for general purpose applications. 1/4"" Hexagon drive 25mm bits. Tough - absorbing. Ideal for difficult and general screw driving applications. Zinc phosphate coated."

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 6.50mm.
Working length: 63mm.
Overall length: 101mm.

This R.S.T. Margin Trowel has a carbon steel blade and metal tang. Primarily used to tidy cement and plaster edges.

For comfortable use, the trowel has a Soft Touch handle.

Size: 130 x 40mm (5.1/2 x 1.1/2in)

These lines are normally used for giving a straight edge for laying bricks etc.

Length: 100m.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 6.0mm.
Working length: 57mm.
Overall length: 93mm.

Scan Heavy-Duty Rigger Gloves are superior quality heavy-duty cow split leather gloves with a double stitched green split leather reinforced palm, thumb and full wrapped index finger. Have a red fabric back with elasticated braid and 7cm rubberised cuffs, with reinforced fingertips and knuckle strap.

Conforms to EN388:2016 and EN ISO 21420 Standards.

Abrasion Performance Index (1-4): 3
Blade Cut Performance Index (1-5): 2
Tear Performance Index (1-4): 4
Puncture Performance Index (1-4): 4

These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.

These Faithfull (T119BO) Wood Jigsaw Blades are specially designed for curved cutting and ideal for epoxy, hardwood, softwood, laminated boards, insulated and heat insulation materials and plastics.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications.

They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use.

DIN338RN
BS328
ISO235

Tip diameter: 5.50mm.
Working length: 57mm.
Overall length: 93mm.

The Masterlock Twin Wire Bungee Cord offers twice the strength of an ordinary bungee and its rounded hooks eliminate the risk of scratching.
The reverse hook bends away allowing more room to attach.
TUV certified.

The MasterLock Twin Wire Bungee Cords have the following specification:

Length: 120cm.
Diameter: 8mm
Resistance Limit: 40kg.
Colour: Dark Blue.
Quantity: 2 Piece.

The OX Pro Chalk Powder (white), contained in a refillable easy-pour container, is formulated for good adhesion and high visibility and can be used for both interior and exterior use. Comes in four different colours: white, red, yellow and blue.

FEATURES

Powder formulated for good adhesion and high visability
For both interior & exterior use
For use with chalk lines
Easy pour, refillable bottle
White Colour, 226 Grams

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 5 mm
Length 60 mm

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only.

They are ideal for drilling glass windows, mirrors, bottles and ceramics.

Lubricate with water for best results.

For use in variable speed drills only.

Diameter 6 mm
Length 60 mm

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals.

They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted.

Manufactured to EN 12413 standard.

SAFETY TIPS

Read the manufacturer's instructions carefully
Wear goggles to guard against flying chips or dust
Inspect the condition of the wheel frequently
Adjust the guard to deflect sparks and dust
Maintain the revs and let the wheel do the work

Bahco spare blades for 301 coping saw. Made of hardened and tempered carbon steel. The fine teeth are ideal for wood cutting.

Teeth milled and set 14 tpi.
Length: 165mm
Pack of 5.

"High quality hammer masonry drill bits manufactured in Germany for the professional tradesman. SDS+ shank. Carbide tip with special centring point for accurate drilling. Certified by the PGM. Toothed carbide tip guides the drilling dust directly into the flute and increases the speed. Suitable for rapid drilling in masonry and the hardest concrete or granite."

1 x supplied in one of the colours shown.

The Hultafors Hi-Vis Retractable Knife has an ergonomic design. Its angled design has a pronounced finger grip and narrowing tip that affords excellent grip when measuring and cutting plasterboard in a single stroke.

The knife has a durable zinc housing with a screw wheel for easy opening without the use of tools. The handle contains a practical, spring-loaded blade magazine holding 10 spare blades (60mm). Few moving parts and magnetic fixings make changing and cleaning blades easy. The blade can be locked in 4 stages.