Timco

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments.Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw. Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating. Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance. Patented twin cut technology for rapid "pick-up" and reduces timber splitting. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 6 Length mm: 150 Thread Length mm: 70 Size mm: 6.0 x 150 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 11.65 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Gauge: 12 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Length inch: 6 Driver Bit Size: PZ3 Thread Type: 40° Single Point Type: Twin-Cut

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw. Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating. Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance. Patented twin cut technology for rapid "pick-up" and reduces timber splitting. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length TECHNICAL DATA: Thread Dia. mm: 6 Length mm: 50 Thread Length mm: 45 Size mm: 6.0 x 50 Pack Quantity Unit: Pieces Recess Type: Pozi Head Dia. mm: 11.65 Substrates: Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Gauge: 12 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Length inch: 2 Driver Bit Size: PZ3 Thread Type: 40° Single Point Type: Twin-Cut

Specially designed for attaching tongue and groove floorboards and panelling. Provides a secure hidden fixture without causing damage, allowing a flush fit with the next board. Reduced head for concealed countersinking. Plain shank for pulling the two substrates together without manual clamping. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating. Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance. Patented twin cut technology for rapid "pick-up" and reduces timber splitting TECHNICAL DATA: Thread Dia. mm: 3.5 Length mm: 45 Thread Length mm: 30 Size mm: 3.5 x 45 Pack Quantity Unit: Pieces Recess Type: TX Drive Head Dia. mm: 4.66 Substrates: Hardwood, Softwood, Chipboard Gauge: 6 Lubrication: Gleitmo Salt Spray Resistance BS EN 9227 Hrs: 600 Corrosion Rating: 2 - Occasionally damp/wet, rural and sheltered areas Included Items: TX10 Impact Bit (Qty 1) Shank Type: Plain Length inch: 1 Driver Bit Size: TX10 Thread Type: 40° Single Point Type: Twin-Cut

Unique design for improved mixing suitable for both 300ml and 410ml resins. Spare mixer nozzles are useful for smaller applications where a full cartridge of resin is not extruded. Resin can then be reused for subsequent applications. Low extrusion force. Unique design for improved mixing. TECHNICAL DATA: To Fit Cartridge Size ml: 300ml & 410ml

Designed for use when fixing with chemical resins. Chisel point, prevents the rod turning when tightening. External hex drive. Embedment depth mark. Manufactured from grade 5.8 carbon steel. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 12 Fixture Hole Diameter mm: 12 Hole Depth mm: 90 Max Fixture Thickness mm: 20 Nut Size mm: M10 Nut Type: Hex Full Point Type: Chisel Size Thread Dia. x L mm: M10 x 130 Thread Dia. mm: M10 Thread Type: Metric Washer Size mm: M10 Washer Type: Form A

Designed for use when fixing with chemical resins. Chisel point, prevents the rod turning when tightening. External hex drive. Embedment depth mark. Manufactured from grade 5.8 carbon steel. TECHNICAL DATA: Corrosion Rating: 1 - Clean, dry; low humidity environments Drill Hole Dia. mm: 14 Fixture Hole Diameter mm: 14 Hole Depth mm: 110 Max Fixture Thickness mm: 25 Nut Size mm: M12 Nut Type: Hex Full Point Type: Chisel Size Thread Dia. x L mm: M12 x 160 Thread Dia. mm: M12 Thread Type: Metric Washer Size mm: M12 Washer Type: Form A