The Everbuild Fill & Skim 5 litre Tub is a revolutionary ready-mixed plaster substitute, formulated using lightweight polymer spheres to produce an easy-to-spread, smooth product which enables all tradesmen and DIY enthusiasts to produce a quality finish and is normally only associated with a time served plasterer. This white-coloured Fill & Skim dries to a hard, but flexible finish, suitable for wall or ceiling application. It will fill holes down to 25mm in one application and is the ideal choice for covering textured paint surfaces, and for restoring old pitted/uneven plastered walls/ceilings in just one quick application. Fill & Skim is the ideal choice for electricians, plumbers, joiners and general builders as a one coat patching plaster for small repair jobs, e.g., over recessed cable trunking and around holes in walls where piping/sockets have been installed. Once dry, Fill & Skim will not shrink, sag, or crack and is ready to paint or paper over 24 hours after application. The product finishes smooth and requires little or no sanding, and can be used for internal repairs over plaster, wood, brick, stone, and rendering.
Everbuild 404 Fungicidal Wash is a powerful, fungicidal wash for the removal of lichens, fungi and algae on all mineral surfaces such as walls, paths, roofs, drives etc. It is effective on most surfaces and also leaves a residual surface to help prevent further infestation. Features: - Internal and external use. - Fast acting. - Leaves a residual surface to prevent future infestation. - Powerful formula. Registered with HSE under Control of Pesticides Regulations; 1986 (HSE 7183). - Kills mould caused by damp on internal and external floors and walls. - Kills mould growth on roofs prior to coating with bituminous coatings. - Removes algae from patios/drives.
Everbuild 404 Fungicidal Wash is a powerful, fungicidal wash for the removal of lichens, fungi and algae on all mineral surfaces such as walls, paths, roofs, drives etc. It is effective on most surfaces and also leaves a residual surface to help prevent further infestation. Features: - Internal and external use. - Fast acting. - Leaves a residual surface to prevent future infestation. - Powerful formula. Registered with HSE under Control of Pesticides Regulations; 1986 (HSE 7183). - Kills mould caused by damp on internal and external floors and walls. - Kills mould growth on roofs prior to coating with bituminous coatings. - Removes algae from patios/drives.
Mitre Fast Bonding Kit is a two-part instant adhesive system comprising a cyanoacrylate adhesive and aerosol activator. Mitre Fast is mainly used in the furniture, timber, kitchen and plastics industries where its instant bonding properties dramatically reduce assembly times for mitre joints when compared to conventional wood adhesives. Also suitable for bonding of MDF, rubber, PVCu, metals etc.
Everbuild Opti-Mix Mortar Plasticiser is the world’s first 1:25 plasticiser is just Pure Admix, smells and works like the best traditional Admix. Benefits include: superior plasticising action, controlled dosage, consistent mix design, easy to use, no waste. 1 litre is equivalent to 25 litres of standard product.
Everbuild Opti-Mix Mortar Plasticiser is the world’s first 1:25 plasticiser is just Pure Admix, smells and works like the best traditional Admix. Benefits include: superior plasticising action, controlled dosage, consistent mix design, easy to use, no waste. 1 litre is equivalent to 25 litres of standard product.