Sika (Everbuild)

The Everbuild Aluminium Tape is made from heat and light reflective Aluminium Foil. It is heat resistant to 180°C and flame retardant to Class O. It has excellent moisture resistance, and is ideal for use as a vapour barrier between foil faced insulation panels in roof and wall applications, duct sealing on all types of air conditioning and ventilation and protecting wires and pipes from heat.

Everbuild Black Jack® 903 Bitumen Trowel Mastic is a black, heavily filled, bituminous compound with added fibres for reinforcement, that is applied by trowel. It is used primarily for patching holes in roofs and bituminous coatings. The product forms a surface skin, but the mass below remains soft to allow for moderate movement.

A thin solvent-based liquid that removes wet paint quickly from brushes, rollers and pads. It works on emulsion, spirit-based paints, varnish and is water washable. Contains conditioner to prolong brush/roller life. Cleans up with water Contains conditioner to prolong brush life. Works on most common paint types. Not suitable for cellulose paints.

The EVERBUILD Brush Restorer is a thin solvent-based liquid which removes paint from gummed up and old hardened brushes, working on all paints, it is water washable. The 500ml product has a powerful fast-acting formula. Before opening the container THOROUGHLY read the health and safety section. Wear the equipment detailed then hold the container away from the face, always, when removing the cap. Store the product upright with the lid securely fastened. Use the restorer in well-ventilated areas and protect all surrounding areas from accidental splashes. Please do not smoke whilst using this product. Pour the brush restorer into a metallic or glass jar, do not use plastic. Immerse your brushes and leave to soak for a minimum of 2 hours or preferably overnight. When paint begins to soften agitate the brushes against the bottom of the jar to loosen paint fragments. Repeat if necessary, then wash brushes with clean water.

The Everbuild Coving adhesive is a high strength, solvent free, adhesive providing a quick grab for fixing polystyrene, plaster coving, and cornices to sound porous surfaces. The 290ml product will also act as a sealant for filling the gaps between individual lengths of coving. This coving adhesive dries white and can be painted over when dry. The solvent free and environmentally friendly formula has excellent adhesion/bond strength and adheres to most common coving surfaces, and has early grab properties, usable in both vertical and horizontal positions. The high solids formulation gives it excellent gap filling properties, it will adhere to damp surfaces, can be cleaned up with water and containing no hazardous solvents, Uses include: Fixing and sealing polystyrene coving, ceiling centres tiles and other decorative polystyrene products to sound surfaces. Fixing plaster coving. Filling gaps between coving sections.