Search
Show prices tax inclusive Show prices tax exclusive
Show prices tax inclusive
Product Catalogue
    Menu Close

    Roofing & Ventilation

    View as Grid List
    Sort by
    Display per page
    Picture of 12 Standard Replacement Friction Hinge
    Picture of A Type Universal Valley Trough

    A Type Universal Valley Trough

    73087
    Installation Valley boards should be fitted of sufficient width to provide support for the roofing battens, either: min.12mm ply lay boards set between rafters, or 6mm continuous ply boards laid over the rafters. A single strip of roofing underlay should be laid up the centre of the valley. Counter battens the same depth as the roofing battens should be fitted onto the valley boards. The main roofing underlay should be laid over th counter batten. Roofing battens should be fitted with the ends firmly located onto the valley boards, positioned close to the counter batten, with care taken to avoid damaging the underlay. The fascia board should be cut to allow the GRP valley trough to pass through and discharge into the gutter without flattening out. The end of the GRP valley trough should be trimmed using a fine toothed hacksaw to the appropriate centre line of the gutter - which normally entails a ‘v’ shaped cut. The GRP valley trough should be fitted with care taken to ensure it is centrally located between the valley boards: the sides should be nailed to the counter battens at max: 500mm centres. Warning: Concealed water troughs behind the mortar bonding strip MUST be kept clear and not blocked with mortar. Take care to maintain correct width between cut edges. NFRC recommend that tiles should not be cut in situ and should not be laid dry and then back fill pointed. Properties LEAD REPLACEMENT GRP lasts as long as lead, is tougher, cheaper, more resistant to accidental damage, and is less prone to theft or vandalism. Using preformed GRP valley troughs saves significant installation time over traditional methods. Roofers report elimination of many problems with valley troughs when changing from lead to CORODRAIN GRP. Coloured lead grey as standard (other colours available on request). DURABILITY Made with high quality un-filled polyester resin with glass fibre reinforcement for maximum strength. A tough bonded melinex film gives excellent weathering performance. Minimum life of 30 years. MANUFACTURED IN UK Manufactured to BS EN ISO 9001:2008 quality standard, our automated continuous pultrusion plant in Coventry. All available from stock for rapid delivery to site. NO MAINTENANCE The inherent qualities of the materials make the valleys UV light and acid rain resistant, and the smooth surface finish inhibits the growth of moss, lichen and the build up of debris. Valley Weights Standard valley troughs: 1.64kg/m² Heavy Duty valley troughs: 2.10kg/m² Valley Thicknesses Standard valley troughs: 1.3mm Heavy Duty troughs: 1.6mm
    £31.96
    Picture of ACRYPOL Flexiglass Catalyst 100g

    ACRYPOL Flexiglass Catalyst 100g

    64063
    The catalyst is the primary component of any fibreglass flat roofing system – see the Flexiglass application guide for full dosage rates.
    £5.92
    Picture of ACRYPOL Flexiglass Catalyst 200g

    ACRYPOL Flexiglass Catalyst 200g

    64064
    £9.85
    Picture of ACRYPOL Flexiglass Catalyst 50g

    ACRYPOL Flexiglass Catalyst 50g

    64062
    The catalyst is the primary component of any fibreglass flat roofing system – see the Flexiglass application guide for full dosage rates.
    £3.91
    Picture of ACRYPOL Flexiglass Primer 5Kg

    ACRYPOL Flexiglass Primer 5Kg

    64057
    Pre-promoted, Low Viscosity, Thixotropic, Polyester Flexible Primer designed specifically for Overlay Roofing application enabling an outstanding bond to multiple substrates.
    £107.85
    Picture of ACRYPOL Flexiglass Resin 20Kg

    ACRYPOL Flexiglass Resin 20Kg

    64056
    A pre-promoted thixotropic polyester flexible resin designed specifically for overlay roofing applications
    £288.86
    Picture of Acrypol+ Waterproof Roof Coating 5kg

    Acrypol+ Waterproof Roof Coating 5kg

    38023
    It was specifically developed to provide a solution for undertaking day to day refurbishment of failed industrial, commercial or domestic flat roofs as well as general patching repairs. Brush applied as a semi-liquid paste; it dries to form an ultra-tough, seamless, flexible overlay. Known as the original waterproof coating, Acrypol+ can be applied during damp weather conditions and still provide a long-term solution to waterproofing problems, including flat roof repair. Acrypol+ is the original name in waterproofing with more than 30 years of recognised excellence within the industry. A unique resin-based acrylic waterproof protective coating that instantly prevents leaks. It was specifically developed to provide a solution for undertaking day to day refurbishment of failed industrial, commercial or domestic flat roofs as well as general patching repairs. Brush applied as a semi-liquid paste; it dries to form an ultra-tough, seamless, flexible overlay. It is ideal for use on flat roofs, leadwork, slate, asbestos cement, all metals, bituminous surfaces, asphalt, flashings, chimney stacks, glasshouses, PVC, concrete and brick – providing excellent protection. Acrypol+ also has the added benefit of being easy to apply, even in damp weather conditions, while still providing a long-term waterproofing solution.
    £100.58
    Picture of Acrypol+Waterproof Roof Coating 2.5Kg

    Acrypol+Waterproof Roof Coating 2.5Kg

    38018
    It was specifically developed to provide a solution for undertaking day to day refurbishment of failed industrial, commercial or domestic flat roofs as well as general patching repairs. Brush applied as a semi-liquid paste; it dries to form an ultra-tough, seamless, flexible overlay. Known as the original waterproof coating, Acrypol+ can be applied during damp weather conditions and still provide a long-term solution to waterproofing problems, including flat roof repair. Acrypol+ is the original name in waterproofing with more than 30 years of recognised excellence within the industry. A unique resin-based acrylic waterproof protective coating that instantly prevents leaks. It was specifically developed to provide a solution for undertaking day to day refurbishment of failed industrial, commercial or domestic flat roofs as well as general patching repairs. Brush applied as a semi-liquid paste; it dries to form an ultra-tough, seamless, flexible overlay. It is ideal for use on flat roofs, leadwork, slate, asbestos cement, all metals, bituminous surfaces, asphalt, flashings, chimney stacks, glasshouses, PVC, concrete and brick – providing excellent protection. Acrypol+ also has the added benefit of being easy to apply, even in damp weather conditions, while still providing a long-term waterproofing solution.
    £60.11
    Picture of B Type Valley Trough

    B Type Valley Trough

    73086
    Installation Valley boards should be fitted of sufficient width to provide support for the roofing battens, either: min.12mm ply lay boards set between rafters, or 6mm continuous ply boards laid over the rafters. A single strip of roofing underlay should be laid up the centre of the valley. Counter battens the same depth as the roofing battens should be fitted onto the valley boards. The main roofing underlay should be laid over th counter batten. Roofing battens should be fitted with the ends firmly located onto the valley boards, positioned close to the counter batten, with care taken to avoid damaging the underlay. The fascia board should be cut to allow the GRP valley trough to pass through and discharge into the gutter without flattening out. The end of the GRP valley trough should be trimmed using a fine toothed hacksaw to the appropriate centre line of the gutter - which normally entails a ‘v’ shaped cut. The GRP valley trough should be fitted with care taken to ensure it is centrally located between the valley boards: the sides should be nailed to the counter battens at max: 500mm centres. Warning: Concealed water troughs behind the mortar bonding strip MUST be kept clear and not blocked with mortar.Take care to maintain correct width between cut edges. NFRC recommend that tiles should not be cut in situ and should not be laid dry and then back fill pointed. Properties LEAD REPLACEMENT GRP lasts as long as lead, is tougher, cheaper, more resistant to accidental damage, and is less prone to theft or vandalism. Using preformed GRP valley troughs saves significant installation time over traditional methods. Roofers report elimination of many problems with valley troughs when changing from lead to CORODRAIN GRP. Coloured lead grey as standard (other colours available on request). DURABILITY Made with high quality un-filled polyester resin with glass fibre reinforcement for maximum strength. A tough bonded melinex film gives excellent weathering performance. Minimum life of 30 years. MANUFACTURED IN UK Manufactured to BS EN ISO 9001:2008 quality standard, our automated continuous pultrusion plant in Coventry. All available from stock for rapid delivery to site. NO MAINTENANCE The inherent qualities of the materials make the valleys UV light and acid rain resistant, and the smooth surface finish inhibits the growth of moss, lichen and the build up of debris. Valley Weights Standard valley troughs: 1.64kg/m² Heavy Duty valley troughs: 2.10kg/m² Valley Thicknesses Standard valley troughs: 1.3mm Heavy Duty troughs: 1.6mm
    £29.08
    Picture of Black Jack® 903 Bitumen Trowel Mastic 1 litre

    Black Jack® 903 Bitumen Trowel Mastic 1 litre

    40047
    Everbuild Black Jack® 903 Bitumen Trowel Mastic is a black, heavily filled, bituminous compound with added fibres for reinforcement, that is applied by trowel. It is used primarily for patching holes in roofs and bituminous coatings. The product forms a surface skin, but the mass below remains soft to allow for moderate movement.
    £14.02
    Picture of Bostik Penetration Primer for Roofs - 5L

    Bostik Penetration Primer for Roofs - 5L

    40043
    Bostik Penetration Primer for Roofs is a general purpose, highly penetrative, thin bituminous primer.It is used for priming bitumen roofing felt, concrete roofs and floors, cementitious screeds/renders, mastic asphalt, weathered corrugated iron and steel prior to the application of bituminous coatings. Apply before a bituminous coating. Highly penetrative, thin bituminous primer. For all common roof surfaces. Spray or brush on.
    £48.08
    Picture of Brett Martin 105mm Round Cast Iron Effect Downpipe Bracket - Classic Black

    Brett Martin 105mm Round Cast Iron Effect Downpipe Bracket - Classic Black

    57084
    Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty.
    £7.18
    Picture of Brett Martin 105mm Round Cast Iron Effect Plain Coupler - Classic Black

    Brett Martin 105mm Round Cast Iron Effect Plain Coupler - Classic Black

    57083
    Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty.
    £17.21
    Picture of Brett Martin 106mm Prostyle Cast Iron Effect External 90° Gutter Angle - Classic Black

    Brett Martin 106mm Prostyle Cast Iron Effect External 90° Gutter Angle - Classic Black

    55047
    Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty.
    £31.39
    Picture of Brett Martin 106mm Prostyle Cast Iron Effect Fascia Bracket - Classic Black

    Brett Martin 106mm Prostyle Cast Iron Effect Fascia Bracket - Classic Black

    55041
    Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty.
    £7.95
    Picture of Brett Martin 106mm Prostyle Cast Iron Effect Gutter x 4m - Classic Black

    Brett Martin 106mm Prostyle Cast Iron Effect Gutter x 4m - Classic Black

    74045
    This modern and contemporary Prostyle gutter measures 106mm across and is ideal for bungalows and conservatories, whilst it has sufficient capacity to handle larger houses due to its unique design. Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty.
    £81.76
    Picture of Brett Martin 106mm Prostyle Cast Iron Effect Internal 90° Gutter Angle - Classic Black

    Brett Martin 106mm Prostyle Cast Iron Effect Internal 90° Gutter Angle - Classic Black

    55046
    Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative. Ready to fit. 10 Year Warranty.
    £31.39
    Picture of Brett Martin 106mm Prostyle Cast Iron Effect Left-Hand External Stopend - Classic Black

    Brett Martin 106mm Prostyle Cast Iron Effect Left-Hand External Stopend - Classic Black

    55044
    Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative.
    £16.71
    Picture of Brett Martin 106mm Prostyle Cast Iron Effect Right-Hand External Stopend - Classic Black

    Brett Martin 106mm Prostyle Cast Iron Effect Right-Hand External Stopend - Classic Black

    55045
    Quick & easy to install. Authentic Cast Iron architectural detailing and finish. An affordable cast iron alternative.
    £16.71