Power Tools & Accessories

"Popular range of precision made blades designed for a variety of applications. For thick metals. Fast, straight cuts. Flexible and shatter-proof. Metals, non-ferrous metals, aluminium, sheet metal, pipes and profiling."

"Popular range of precision made blades designed for a variety of applications. Ideal for wood with nails. Flexible and shatter-proof. Metals, non-ferrous metals, aluminium, sheet metal, pipes and profiling."

"High quality impact resistant 50mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"25mm quality driver bits ideal for general purpose applications. 1/4"" Hexagon drive 25mm bits. Tough - absorbing. Ideal for difficult and general screw driving applications. Zinc phosphate coated."

"High quality impact resistant 50mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 50mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"A right angle 25mm driver and magnetic bit holder to help loosen and tighten screws or fixings in the most inaccessible places. Helps you achieve the seemingly impossible. Suitable for all 1/4"" hexagon insert bits. Zinc alloy housing for high torque applications. 1/4"" Hex shank for quick release. Max 2000 min ⁻¹/rpm. Suitable for drills 10.8V - 18V."

"This unique device enables accurate fixing in overhead or awkward positions without the necessity of pre-drilling. The in-built spring also allows for countersinking. The surface of the screw head is held on by an additional ultra strong, powerful rare earth magnet allowing for vertical or horizontal screwing without slippage. Allows precision screwing with a single hand operation, saving time. The in-built spring allows for countersinking. Suitable for use with all 25mm driver bits. The bits retract within the mechanism allowing the screw to magnetically attach to the end of the holder. Suitable for use with all standard 1/4"" insert bits. German made, premium quality."

"TCT Router cutters designed to meet the needs of the tradesman and woodworker for quality and performance. PTFE anti-stick coating on body to minimise resin and heat build up. Twin straight fluted cutters give a clean finish to the cutting edges. Superior length of shank stops vibration and increases stability. Suitable for cutting chipboard, MDF, plywood, hardwood, softwood, laminate and veneered wood."

"High quality impact resistant 50mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"25mm quality driver bits ideal for general purpose applications. 1/4"" Hexagon drive 25mm bits. Tough - absorbing. Ideal for difficult and general screw driving applications. Zinc phosphate coated."

"High quality impact resistant 50mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 50mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"25mm quality driver bits ideal for general purpose applications. 1/4"" Hexagon drive 25mm bits. Tough - absorbing. Ideal for difficult and general screw driving applications. Zinc phosphate coated."

"A premium dry core bit with spiral barrel design for swift dust removal. Fast start segments. Side vents help keep the bits cool resulting in longer life. Suitable for use in masonry, brick, concrete with light or medium steel reinforcing. Also effective for granite, marble and stone."

"A premium dry core bit with spiral barrel design for swift dust removal. Fast start segments. Side vents help keep the bits cool resulting in longer life. Suitable for use in masonry, brick, concrete with light or medium steel reinforcing. Also effective for granite, marble and stone." "A premium dry core bit with spiral barrel design for swift dust removal. Fast start segments. Side vents help keep the bits cool resulting in longer life. Suitable for use in masonry, brick, concrete with light or medium steel reinforcing. Also effective for granite, marble and stone."

"Top selling blades available in twin packs with 2 x 100ml oil shots. 2 x 300mm blades and 2 x 100ml oil shots. Available with SMI-7 Universal diamond blades, MGP-10 concrete diamond blades, or SGP-15 diamond blades. Semi synthetic 2-stroke oil suitable for all modern static 2-stroke engines."

"Ideal for drilling in tight corners or at awkward angles. Designed for accessing awkward places. Ball bearing shaft support for superior strength. Lightweight, compact design. Suitable for up to speed of 6000RPM. Simply attaches to your conventional drill."

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 50mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"High quality impact resistant 25mm screwdriver bits ideal for use in the most demanding applications. Tough and absorbing. Specially designed for use with impact drivers. Magnesium phosphate coated for excellent wear resistance."

"Quality straight shank carbon steel drill bits for clean cutting. Spear point, tungsten carbide bit heads. For use with portable drills. Best used at low rpm. Use water to cool when drilling - failure to do so will result in premature wear and overheating. Suitable for drilling through glass, tiles, mirrors and ceramics."

"Popular range of precision made blades designed for a variety of applications. Laminated boards to 30mm, chip free finish. Cuts on down stroke (use without orbital action)"

"Popular range of precision made blades designed for a variety of applications. For tight curved cuts in hardwoods, softwoods, plywood, chipboard, synthetic materials and acrylic glass."

"Popular range of precision made blades designed for a variety of applications. Wood and laminated chipboard to 25mm, plastics. Curve cuts."

"Popular range of precision made blades designed for a variety of applications. Wood to 30mm, plastics. Finer cut."

"Popular range of precision made blades designed for a variety of applications. Wood to 60mm, plastics. Fast cut."

"Popular range of precision made blades designed for a variety of applications. Wood to 60mm, plastics. Coarse fast cut HSS."

"Popular range of precision made blades designed for a variety of applications. Hard and soft woods to 60mm, plastics to 50mm and acrylglas to 30mm. Fast coarse cut."

"Popular range of precision made blades designed for a variety of applications. Ideal for fast, precise cuts in hardwoods, softwoods, chipboard, fibre board, wooden fibreboard and synthetic materials."

"Popular range of precision made blades designed for a variety of applications. Ideal for fast, clean cuts in hardwoods, softwoods, chipboard, fibre board and synthetic materials."

"Popular range of precision made blades designed for a variety of applications. Ideal for rough, fast cuts in hardwoods and softwoods."

"Popular range of precision made blades designed for a variety of applications. Ideal for cuts in wooden exteriors. For fast, rough cuts and tree pruning. Hardened teeth for extra durability."

"Popular range of precision made blades designed for a variety of applications. For straight and curved cuts. For fast, clean cuts in hardwoods, softwoods, chipboard, plywood and synthetics."

The DEWALT DCK218D2T XR Twin Pack, contains the following: 1 x 12V DCD716 Combi Drill is an excellent solution for sub-compact performance and power. Has a high torque output of 30Nm and can drill into masonry. 2-speed transmission ensures easy work of light application. Single clutch collar with 16 adjustable torque control settings. No Load Speed: 0-1,500/0-4,000/min. Impact Rate: 22,500/bpm. Max. Torque: 30Nm. Torque Settings: 16. Capacity: Metal: 10mm, Masonry: 8mm, Wood: 20mm. 1 x 12V DCF815 Impact Drill with all metal gearing for efficient power transmission and long life. Aluminium front housing provides greater heat dispersion increasing motor life. Parabolic switch profile allows for greater control over speed. 6.35mm 'drop in' key-less hex driver which allows for quick fitment. Bit Holder: 6.35mm (1/4in). No Load Speed: 2,450/min. Impact Rate: 3,400/min. Max. Torque: 107Nm. Capacity: Bolt M12.

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depressed centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work

The DEWALT DCK2110L2 XR Brushless Sub-Compact Twin Pack, contains the following: 1 x 12V DCD701 XR Brushless Sub-Compact Drill Driver has a lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. Compatible with your existing 10.8V batteries and tools. Chuck: 10mm Keyless. No Load Speed: 0-425/0-1,500/min. Max. Torque: 57.5Nm, 15 Settings. Capacity: Wood 20mm. Weight: 0.9kg. 1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Compatible with your existing 10.8V batteries and tools. No Load Speed: 0-950/0-1,950/0-2,850/min. Impact Rate: 0-3,600/bpm. Max. Torque: 163Nm. Bare Unit Weight: 0.8kg. Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x 10.8-18V DCB112 XR Multi-Voltage Li-ion Charger and 1 x TSTAK II Kit Box.

The DEWALT XR Slide Li-ion Battery Pack offers extended run time and optimised power to complete applications quickly. No memory effect and virtually no self-discharge for maximum productivity and less downtime. A LED state of charge indicator helps to manage charging/working time. Compatible with all 18V XR slide on tools and XR chargers. The DEWALT DCB182 XR Slide Li-ion Battery Pack offers extended runtime and optimised power to complete applications quickly. The lightweight design provides the user with upgraded 4Ah Power without increasing the size or weight. The battery has no memory effect and virtually no self-discharge, ensuring maximum productivity and less downtime. It is fitted with a LED State of Charge Indicator that helps to manage charging times. The battery pack has excellent electrical characteristics and is compatible with all DEWALT 18 Volt tools that except slide-on type batteries.

The DEWALT DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. Specifications: No Load Speed: 9,000/min. Disc Diameter: 125mm, M14 Spindle. The DEWALT DCG405N XR Brushless Grinder is supplied as a bare unit, no battery or charger supplied.

The DEWALT DCS570 XR Brushless Circular Saw is ideal for general purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power on job site cutting tasks and joinery materials. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. Specifications: No Load Speed: 5,500/min. Max Cutting Depth @90º: 64mm. Blade: 184mm, 16mm Bore. Bevel Capacity: 57°. The DEWALT DCS570N XR Brushless 184mm Circular Saw is supplied as a bare unit, no battery or charger.

The DEWALT Cordless Extreme Framing Circular Saw Blade has a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage. Suitable for ripping and cross-cutting natural timbers and cutting composite wood based sheet materials e.g. Plywood, MDF and chipboard. NOT recommended for timbers that contains nails. The DEWALT DT10624QZ Cordless Extreme Framing Circular Saw Blade has the following specifications: Blade Diameter: 165mm. Bore Size: 20mm. Tooth Count: 24.

The DEWALT DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger and lock-off switch for quick controlled cuts and enhanced work safety. The brushless motor offers incredible efficiency and increased power delivery, resulting in less wear and increased longevity of the tool. With a 4-position pendulum action that controls the aggressiveness or smoothness of cuts. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible. Bare Unit, No Battery or Charger Supplied. Specifications: Strokes at No Load: 0-3,200/min. Stroke Length: 26mm. Bevel Capacity: 0-45°. Capacity: Metal 10mm, Wood 135mm.

The DEWALT DCS355 XR Brushless Oscillating Multi-Tool delivers up to 57% more runtime over brushed motors. It uses the Quick-Change Accessory System that allows blades and attachments to be changed without the use of tools. The Dual-Grip Variable Speed Trigger provides the ultimate speed and application control. It has a bright LED light that illuminates dark work surfaces for accurate cutting, whilst the depth control straight cut guide increases cutting accuracy for detailed work. Specifications: No Load Speed: 0-20,000/min. Length: 310mm. DEWALT DCS355N XR Brushless Oscillating Tool 18 Volt Bare Unit. Supplied WITHOUT batteries or a charger.

The DEWALT DCW604 XR Twin Base Router has been designed to be powerful yet heavy-duty. The brushless motor offers incredible efficiency and increased power delivery, resulting in less wear and increased longevity of the tool. The aluminium motor housing enables the router to be quickly transformed into a fixed base attachment enabling for increased versatility. The variable speed ranges enable the router bit to be optimised depending on application and material type. The 5-position adjustable turret enables for stepped or repeated plunges. The spindle lock offers quick and easy router bit change, saving time. Soft start reduces movement of the tool on startup increasing user control. There is an electronic brake for added control and safety. Rubber overmould grips make using the unit more comfortable. Dual LED lights increase visibility around the router bit during operation for increased accuracy. Supplied with a TSTAK™ Kitbox. Bare Unit, No Battery or Charger Supplied. Specifications: Collet: 8mm (1/4in). No Load Speed: 16,000 – 27,000/min. Plunge Depth: 55mm. Max. Cutter Diameter: 30mm.

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool. Ideal for drilling, countersinking and counterboring in one operation. This means that a No.8 Screwdigger can be adjusted to predrill for different lengths of No. 8 Screw. Uses 7/64in Drill Bit. To ensure an acurate fit we suggest you use the same Plug Cutter from the Disston brand. For No 8 screw

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 9.0mm. Working length: 81mm. Overall length: 125mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 1.0mm. Working length: 12mm. Overall length: 34mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 1.50mm. Working length: 18mm. Overall length: 40mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 10.00mm. Working length: 87mm. Overall length: 133mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 10.50mm. Working length: 87mm. Overall length: 133mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 11.00mm. Working length: 94mm. Overall length: 142mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 11.00mm. Working length: 94mm. Overall length: 142mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 12.00mm. Working length: 101mm. Overall length: 151mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 13.00mm. Working length: 101mm. Overall length: 151mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 2.0mm. Working length: 24mm. Overall length: 49mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 2.50mm. Working length: 30mm. Overall length: 57mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 3.00mm. Working length: 33mm. Overall length: 61mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 3.50mm. Working length: 39mm. Overall length: 70mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 4.0mm. Working length: 43mm. Overall length: 75mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 4.50mm. Working length: 47mm. Overall length: 80mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 5.0mm. Working length: 52mm. Overall length: 86mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 5.50mm. Working length: 57mm. Overall length: 93mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 6.0mm. Working length: 57mm. Overall length: 93mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 6.50mm. Working length: 63mm. Overall length: 101mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 7.0mm. Working length: 69mm. Overall length: 109mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 7.50mm. Working length: 69mm. Overall length: 109mm

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 8.0mm. Working length: 75mm. Overall length: 117mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 8.50mm. Working length: 75mm. Overall length: 117mm.

Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RN BS328 ISO235 Tip diameter: 9.50mm. Working length: 81mm. Overall length: 125mm.

The Einhell TE-CD 18/48 Li-i Power X-Change Impact Drill delivers power with pinpoint accuracy exactly where it is needed. Ideal for drilling in harder materials such as stone and brick on restoration and renovation jobs. Electronic speed control ensures the impact drill driver can be adjusted to the particular material and application. Its ergonomic soft grip provides exceptionally easy handling and a firm, secure grip. An LED light provides an optimum view of the work area, even in dark areas. The lithium-ion battery has a battery management system for optimum discharge control and long battery life. Thanks to the battery capacity indicator with 3 LEDs, you can check the current charge level at a glance. Its Power X-Change system battery can be used in all products from the Power X-Change family. Supplied with: 2 x 18V 2.0Ah Power X-Change Li-ion Batteries. 1 x Power X-Change Li-ion Charger. 1 x Carry Case. Specifications: Drill Chuck: Single Sleeve 13mm. No Load Speed: 0-400/0-1,500/min. Impact Rate: 0-6,400/0-24,000/bpm. Max. Torque: 48Nm. Torque Settings: 23. Charging Time: 80min.. Weight: 1.5kg.

The Einhell GE-CM 18/30 Li Power X-Change Lawnmower is recommended for lawns of up to 150m² in size. Fitted with a brushless motor for increased power and longer run time than a conventional carbon brush motor. Its high-quality impact-resistant plastic housing also increases product lifetime. For practical mowing, there is a 3-level axial cutting height adjustment facility. A folding long handle enables storage in minimum space. For easy transportation, there is an integrated carry handle. Its large wheels put less stress on the lawn while mowing. The battery provides the mower with a speed of up to 3,500 rpm, with a cutting width of 30cm. A battery charge level indicator with three LEDs makes it easy to keep a constant eye on the remaining power. Supplied with: 1 x 18V 3.0Ah Li-ion Battery and 1 x Charger. Specification: Cutting Width: 30cm Cutting Height Adjustment: 3 Stages, 30-70mm Grass Box Capacity: 25 litre Wheel Diameter: Front 140mm, Rear 140mm

The Einhell TC-AG 115 Mini Grinder is suitable for DIY enthusiasts who want a lightweight, handy tool provides good service on cutting, grinding and roughing jobs in the garden, workshop and garage. Fitted with a disk guard for high safety during operation and a spindle lock for fast and easy tool change. Equipped with a robust, flat metal gear head, which ensures good power transmission and is very helpful in places which are difficult to access. An additional handle that can be adjusted in two positions enables user-friendly and safe handling even during long work sessions. A flange nut wrench is also provided. Cutting Disk NOT Included. Specifications: Input Power: 500 Watt. No Load Speed: 12,000/min. Disc Diameter: 115mm.

The Einhell TC-CS 1230 is a reliable, powerful DIY tool and is ideal for numerous cutting-to-size jobs in wood. The sawing depth and tilt angle of the saw can be adjusted without tools, and with the carbide blade, you can make cuts both with and across the grain. Fitted with a large, ergonomic handle, making it comfortable to hold and positive to guide. The splitter offers additional safety for users and material alike, preventing the blade from jamming. The parallel stop ensures an accurate cut and the sturdy galvanised soleplate, offers outstanding sliding properties for exact, continuous sawing. A connection for direct dust extraction is also provided. Supplied with: 1 x 160mm TCT Saw Blade, 1 x Parallel Guide and 1 x Dust Extractor Adaptor. Specifications: Input Power: 1,230 Watt. No Load Speed: 5,000/min. Blade: 160 x 16mm Bore, 24 Tooth TCT. Max. Cutting Depth: @90°: 55mm, @45°: 37mm.

The Einhell TC-JS 18 Li Power X-Change Jigsaw delivers exact cuts thanks to its smooth operation. For fast cuts, it has a selectable pendulum action. The universal blade holder, without tools, saves unnecessary hand movements, enabling the blade to be changed quickly and without the need for any tools. For optimum visibility whilst working, there is a dust blow-off function. The integrated plastic sliding element protects particularly sensitive workpieces. Cordless freedom with concentrated rechargeable battery power: The rechargeable batteries from the Einhell system family can be used in all Power X-Change devices. Supplied with: 5 x Jigsaw Blades, 1 x 18V 2.5Ah Li-ion Battery and 1 x Charger. Specifications: Strokes at No Load: 0-2,700/min. Stroke Length: 20mm. Bevel Capacity: 0-45°. Capacity: Metal 8mm, Wood 70mm, Plastic 10mm.

The Einhell TE-HD 18 Li Cordless Rotary Hammer has a robust and versatile design, ideal for screwing and drilling jobs with an additional powerful hammer function. It's pneumatic hammer mechanism offers highly effective propulsion in concrete. The powerful motor and metal gearing produce a high torque and provide increased durability. The finely adjustable speed electronics allow for additional control in sensitive jobs. Ergonomic soft grip handle for comfortable, safe handling every time. Quick stop, LED light and the automatic SDS-Plus chuck enable comfortable operations. Compatible with all other Power X-Change tools and batteries. Supplied with: 1 x 18V 1.5Ah Li-ion Power X-Change Battery, 1 x 18V Power X-Charger System Fast Charger and 1 x Carry Case. Specifications: Modes: Screwdriving, Drilling, Hammer Drilling In Concrete. No Load Speed: 0-1,100/min. Impact Rate: 0-5,700/bpm with 1.2 joules. Capacity: Concrete 12mm. Charging Time: 30 Minutes.

The Einhell TE-MG 200CE Multi-Tool is a high-quality, compact and ergonomic tool for sawing, sanding, scraping and much more. The electronic speed control ensures smooth starting and enables the power to be adjusted exactly to the particular task. The soft grip provides a non-slip hold, while the extremely slim design makes it the ideal helper in hard-to-reach places. The dust extractor plus adaptor can be fitted without tools and keeps the air clean at all times, even during jobs with intensive dust development. The tool chuck of this versatile tool is adjustable, up to 12 settings for mounting various tools. A cable clip is provided for securing the wound-up cable neatly and safely in place after use. Comes with: 1 x Delta Sanding Disc, 6 x Abrasive Papers, 1 x Scraper, 1 x Plunge-Cut Blade for Wood and 1 x Hex Key. Specifications: Input Power: 200W. No Load Speed: 30,000-42,000/min. Oscillating Angle: 3°. Sandpaper Size: 93 x 93 x 93mm.

The DEWALT Extreme Framing Circular Saw Blades have a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage. Can be used for ripping and cross-cutting natural timbers. Cutting composite wood based sheet materials e.g. plywood, MDF and chipboard. They are suitable for use with portable and stationery circular saws. The DEWALT DT10302QZ Circular Saw Blade has the following specifications: Blade Diameter: 184mm. Bore Size: 16mm. Tooth Count: 24. Nail Tough- Can be used on nail embedded wood

The DEWALT Extreme Framing Circular Saw Blades have a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage. Can be used for ripping and cross-cutting natural timbers. Cutting composite wood based sheet materials e.g. plywood, MDF and chipboard. They are suitable for use with portable and stationery circular saws. The DEWALT DT10302QZ Circular Saw Blade has the following specifications: Blade Diameter: 184mm. Bore Size: 16mm. Tooth Count: 24. Nail Tough- Can be used on nail embedded wood

The HSS wavy set teeth on this Faithfull bi-metal blade make it ideal for sawing wood, copper and aluminium pipes, sheet metal, plastics and profiles. Ideal for cutting veneered and laminated boards as well as parquet in flooring and partition wall applications. Compatible with many multi-function oscillating power tools.

The Faithfull The High Carbon Steel (HCS) Hinge Bore Bit is specially designed for drilling blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. Available in 2 sizes. Suitable for use on all natural woods and man-made materials such as blockboard, melamine faced boards, chipboard and MDF. High carbon steel (HCS) hinge bits are not recommended for repetitive work in man-made boards. These bits should always be used with a stand-mounted drill. The Faithfull FAIHBB26HCS HCS Hinge Bore Bit has the following dimensions: Size: 26mm diameter x 60mm long x 8mm shank.

The Faithfull The High Carbon Steel (HCS) Hinge Bore Bit is specially designed for drilling blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. Available in 2 sizes. Suitable for use on all natural woods and man-made materials such as blockboard, melamine faced boards, chipboard and MDF. High carbon steel (HCS) hinge bits are not recommended for repetitive work in man-made boards. These bits should always be used with a stand-mounted drill. The Faithfull FAIHBB35HCS HCS Hinge Bore Bit has the following dimensions: Size: 35mm diameter x 60mm long x 8mm shank.

5.5 x 160mm, 6 x 160mm, 6 x 210mm, 7 x 160mm, 7 x 210mm, 8 x 160mm, 8 x 210mm, 10 x 160mm, 10 x 210mm and 12 x 210mm.

Diameter: 115mm Thickness: 1.0mm Bore: 22.23mm Max. RPM: 13,300 Pack Quantity: Tin of 10.

Tin of 10 Faithfull Multi-Purpose Cutting Discs. Ideal for cutting a wide range of materials used in the construction and fabrication industries. At only 1mm thick they are able to provide a fast cutting action with less waste and dust. Multi-Cut discs solve the problem of cutting several different materials at once and are ideal for cutting modern-day composite materials used throughout industry. Will cut sheet metal, stainless steel (inox), pipes and profiles, brick, stone, ceramic tiles and other building materials along with plastics/ PVC. These versatile discs are available in the three most popular sizes and are supplied in a sturdy metal storage tin of ten for safekeeping. Specifications: Diameter: 115mm. Thickness: 1.0mm. Bore: 22.23mm. Max. RPM: 13,300.