Tool-free isolation valve for appliances JG Speedfit appliance tap allows isolation of appliances such as a washing machines or dishwashers for maintenance or installation. Simply push the valve fully onto the pipe and thread the appliance hose onto the valve. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit appliance tap is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Quickly connects an appliance to the water supply • Integrated 1/4 turn shut off valve • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water (not suitable for central heating systems)
Easily connects to a tap connections with horizontal feeds (washer included)
JG Speedfit bent tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point (horizontal pipe runs). The tap connector comes complete with brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit bent tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal™ collet with stainless steel teeth and main O-Ring seal Twist & Lock® cap secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
A durable brass adaptor for connecting Metric to FBSP type fittings JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection and durable male thread • Safe flame-free installation, with no hot works, glue or flux • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
A durable brass adaptor for connecting Metric to FBSP type fittings JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection and durable male thread • Safe flame-free installation, with no hot works, glue or flux • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Quickly and securely connects equally sized pipe to form a 90° pipe bend JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Quickly and securely connects equally sized pipe to form a 90° pipe bend JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Quickly and securely connects equally sized pipe to form a 90° pipe bend JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Quickly and securely connects three pipes of equal size JG Speedfit equal tee push-fit fitting for the connection of three equal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Quickly and securely connects three pipes of equal size JG Speedfit equal tee push-fit fitting for the connection of three equal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Quickly and securely connects three pipes of equal size JG Speedfit equal tee push-fit fitting for the connection of three equal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Simply connects pipework to a fixture or appliance without tools (hand-tighten to tap) JG Speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits • Instant push-fit and hand-tighten connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Quickly and securely connects two unequal sized Speedfit fittings to reduce a line size
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal™ collet with stainless steel teeth and main O-Ring seal Twist & Lock® cap secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit reducing straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
JG Speedfit reducing straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Quickly and securely connects three pipes of unequal size JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Plastic service valve allows isolation of a fixture or appliance for emergency or maintenance work JG Speedfit service valve for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit service valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit service valve with 1/4 turn isolation screwdriver slot • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water (not suitable for central heating)
Plastic service valve allows isolation of a fixture or appliance for emergency or maintenance work JG Speedfit service valve for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit service valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit service valve with 1/4 turn isolation screwdriver slot • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water (not suitable for central heating)
Easily connects two Speedfit fittings of equal size to create a swivel type 90° connection JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Easily connects two Speedfit fittings of equal size to create a swivel type 90° connection JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Quickly and easily caps off pipework for a temporary or permanent installation JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Quickly and easily caps off pipework for a temporary or permanent installation JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Quickly and easily caps off pipework for a temporary or permanent installation JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Easily connects to a tap or syphon connection (washer included) JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Easily connects to a tap or syphon connection (washer included) JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Easily connects to a tap or syphon connection (washer included) JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Twist & Lock® cap secures fitting and adds compression • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for hot and cold water and central heating systems
Creates a rigid connection and enhanced dual action seal when fitting a Speedfit pipe to a Speedfit fitting Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting.
JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal. Features and benefits
• 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only) • Maintains structural integrity of the pipe connection • Helps make the pipe more rigid when a side load is applied • Suitable for hot and cold water and central heating systems • Suitable for Speedfit pipes and fittings only
Creates a rigid connection and enhanced dual action seal when fitting a Speedfit pipe to a Speedfit fitting Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting.
JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal. Features and benefits
• 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only) • Maintains structural integrity of the pipe connection • Helps make the pipe more rigid when a side load is applied • Suitable for hot and cold water and central heating systems • Suitable for Speedfit pipes and fittings only
Creates a rigid connection and enhanced dual action seal when fitting a Speedfit pipe to a Speedfit fitting Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting.
JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal. Features and benefits • 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only) • Maintains structural integrity of the pipe connection • Helps make the pipe more rigid when a side load is applied • Suitable for hot and cold water and central heating systems • Suitable for Speedfit pipes and fittings only
Directly connects a tank to a mains supply simply and securely JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a maximum wall thickness of 4mm.
Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for cold water use only
Directly connects a tank to a mains supply simply and securely JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a maximum wall thickness of 4mm.
Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK. Features and benefits
• Instant push-fit connection • Install and demount in seconds without tools • Safe flame-free installation, with no hot works, glue or flux • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal • Non-toxic, resists corrosion and no scale build-up • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Suitable for cold water use only
Avoids the need to make good around pipework Can be fitted onto existing pipework Manufactured from high grade polypropylene Simple click together system
**Sold Individually** " UV stabilised so will not discolour, chip or flake Made from the highest quality grade uPVC Available in multiple lengths & widths"
**Sold Individually** UV stabilised so will not discolour, chip or flake Made from the highest quality grade uPVC Available in multiple lengths & widths"
Avoids the need to make good around pipework Can be fitted onto existing pipework Manufactured from high grade polypropylene Simple click together system
**Sold Individually** UV stabilised so will not discolour, chip or flake Made from the highest quality grade uPVC Available in multiple lengths & widths"
**Sold Individually** UV stabilised so will not discolour, chip or flake Made from the highest quality grade uPVC Available in multiple lengths & widths"
OEM style thermocouple 900mm will fit Honeywell Q309A type thermocouple applications. Manufactured to be dimensionally equivalent to the original thermocouple but employs a modern tip structure to give faster hold-in and drop-out times. Manufactured in Europe by a world leading gas safety company.
Our CP Round Dualflush button is compatible with furniture, tiles, partitioning and walls. For use with Vantage and Miniflo cisterns and Illusion A and V frames.
Designed for use as a replacement in most plastic and ceramic exposed and concealed cisterns. Compact delay fill models save water and support BREEAM by only allowing a cistern to start refilling once flushing is complete. The unique side inlet float arm makes it impossible for the float to become detached. This high quality side inlet valve has a built in backflow prevention device making it one of the safest valves available. Hydroflo side inlet compact float valve with brass tail.
udley Hydroflo Float Valves are Equilibrium Quiet Filling Part 4 Valves, manufactured to BS1212 standards. These are available in side or adjustable bottom inlet from 8″ to 11.1/2″, with either a plastic or brass tail option to help prevent cross-threading. The unique float arm makes it impossible for the float to become detached. Filter removal is made quick and simple by providing a key attached to every diverter, without causing any damage to the valve. Simple and easy to install, this valve is a great replacement for any cistern. Hydroflo Telescopic bottom inlet valve with brass tail.
Telescopic valves can have a joint beneath the waterline when installed. To ensure full compliance to water regulations when fitting, please ensure the joint is above the critical waterline.
Designed to securely mount washbasins to a variety of solid building materials. Countersunk nylon bushes designed to ensure no damage is done to the basin during installation. Can also be used into wood without the use of nylon plugs.
TECHNICAL DATA: Drill Hole Dia. mm: 14 Max Recommended Load kg: 50 Type: Heavy Duty Basin Fixings
Designed to securely mount washbasins to a variety of solid building materials. Countersunk nylon bushes designed to ensure no damage is done to the basin during installation. Can also be used into wood without the use of nylon plugs.
Designed for floor fixing pan/bidets into a variety of solid building materials. Countersunk nylon bushes designed to ensure no damage is done to the fixture during installation. Flat caps for a concealed finish. Can also be used into wood without the use of nylon plugs.
Designed to fix WC pan/bidets to a variety of solid building materials. Fully adjustable for a quick and easy installation. Countersunk nylon bushes designed to ensure no damage is done to the fixture during installation. Can also be used into wood without the use of nylon plugs.
Eris slide rail shower kit with single function handset rub-clean 566mm slide rail 700mm overall rail length with 150cm shower hose and hose retainer minimum operating pressure 0.2 bar LP
bath pillar taps deck mounted with water flow straightener cold ceramic cartridge C-201-RTC hot ceramic cartridge C-201-LTC 3/4" x 50mm male threaded connections deck mount drill hole diameter 27mm minimum operating pressure 0.2 bar LP
Pack of 10 long-lasting, waterproof, non clogging, silicone carbide abrasive strips, perfect for cleaning copper tubes before soldering, or roughing up plastic pipes before jointing.
Webbed design to increase effectiveness 180 grit, medium grade Size: 38mm x 250mm
SLIM+ is an extra flat shower waste with SMART MEMBRANE TECHNOLOGY. Quick and easy to install in all configurations, extra reliable without any risk of leaks and easy to clean, SLIM+ is guaranteed to meet all the installers and end users expectations. Available in a range of finishes, the SLIM+ will compliment any bathroom design.
The Arctic Hayes ZE Spray Aero, Small Freeze Kit is suitable for 1 x 8-15mm pipe freeze. The safe and professional way to extend or repair pipework in minutes, without draining down or turning off the mains. Allows you to freeze pipes in as little as 2 minutes. Suitable for copper, steel, stainless steel, plastic, lead and iron pipes.
It has a non-flammable formula that is also kinder to the environment, with low global warming potential gas. Saves time and money.