Plumbing & Heating

1/2" Conical One End

1/2" Conical One End

1/2" Conical One End

1/2" Conical One End

1/2" Conical One End

1/2" Conical One End

1/2" Conical One End

1/2" Conical One End

1/2" BSP Male inlet 1/2"BSP Male Hose Outlet

For 19mm riser rail

DIAPHRAGM WASHER FOR SIAMP FLOAT VALVE

1 1/2in FLUSH DADDY DUAL FLUSH DROP VALVE WITH 2in RUBBER CONVERTOR


FlushDaddy Flusher Dual Flush Valve


1 1/2in Flush Daddy Dual Flush Drop Valve with 2in Rubber Converter / 2in Flush Daddy Dual Flush Drop Valve

Bi-directional flow design
Can be mounted vertically or horizontally
Integrated radiator balancing insert
Easy grip TRV head with energy saving button that alerts user to economical setting for comfort
Liquid sensor provides consistent and long-lasting performance

Motor open
Spring return action
Manual lever for filling & draining the system
Powerhead replaceable without draining down
Potential free end switch for electrical control of pump and/or boiler

Unique and simple adjustment mechanism
Wide differential pressure range 0.1 to 0.6 bar
22mm compression fittings for ease of installation
Ensures constant flow through boiler
Reduces system noise and maintains an even system pressure

Integral stop valve. Enables seat to be cleaned without draining the system
Vacuum break ensures air collection
Simple service and cleaning
1/8" and 3/8" BSP connections
1/8" to 1/2" adaptor

Bi-directional flow design
Can be mounted vertically or horizontally
Integrated radiator balancing insert
Easy grip TRV head with energy saving button that alerts user to economical setting for comfort
Liquid sensor provides consistent and long-lasting performance

Dual diaphragm temperature sensing element
Suitable for surface or switch box mounting
Heat anticipator for close temperature control
10 to 30C setpoint range
Change-over contact switching (cooling loads)

Spring return action
Three position operation
Powerhead replaceable without draining down
Manual lever for filling/draining down
Quiet operation, minimal power consumption

Motor open
Spring return action
Manual lever for filling & draining the system
Powerhead replaceable without draining down
Potential free end switch for electrical control of pump and/or boiler

Ideal for general applications
Suitable for use on uninsulated and foam lagged cylinders
Surface mounted
Double insulated
Cylinder strap & hooks

The Skylo bottom entry fill valve is small and compact, allowing it to fit in a variety of different cistern sizes. It has a delayed fill and a float shield meaning it can squeeze into the tightest cisterns. It can adjust in height from 8" to 12".

Compact
Telescopic
Water Saving Delayed Fill
Quiet Fill
Heavy Duty Brass Threads
Supplied With Double Check Filter

Specifications:

Height Adjustable 8" - 12"
Working Pressure 0.25 - 16bar
Thread Size ½" (UK)
Thread Material Brass
Flow Rate (2 Bar) 0.208 L/S

1M FLAP SHOWER SEAL 8-10MM SCREEN 23MM DROP

Dia 98mm, Hole 54mm, Thick 15mm conical soft rubber.

The Arctic Hayes ZE Spray Aero, Small Freeze Kit is suitable for 1 x 8-15mm pipe freeze. The safe and professional way to extend or repair pipework in minutes, without draining down or turning off the mains. Allows you to freeze pipes in as little as 2 minutes. Suitable for copper, steel, stainless steel, plastic, lead and iron pipes.

It has a non-flammable formula that is also kinder to the environment, with low global warming potential gas. Saves time and money.

A universal slimline concealed cistern complete with universal float valve which can switch between bottom or side entry. The kit also contains a water saving dual flush valve with a 570mm cable, blanking plugs, flush pipe and flush cone.

Compact Cistern
Supplied with Dual Entry Fill Valve
Easy Install Mounting Bracket
Easy Twist & Remove Dual Flush Valve
Water Saving Adjustable Flushing Volumes
Flushpipe, Fittings & Pan Seal All Included

Specifications:

Flush Rate 2.1 Litres Per Second
Size (H) 320mm x (W) 350mm x (D) 140mm

The Skylo traditional side entry ball valve, can be used to replace cistern valves that has a similar item already. For this valve to function correctly a ball float is screwed to the threaded tail. The valve has an easy operating adjustable arm and a pivoting thread for the ball float.

Specifications:
Working Pressure 0.2 - 6bar
Thread Size ½" (UK)
Thread Material Plastic
Flow Rate (2 Bar) 0.158 L/S

The Skylo traditional bottom entry ball valve, can be used to replace cistern valves that has a similar item already. For this valve to function correctly a ball float is screwed to the threaded tail. The valve has an easy operating adjustable arm and a pivoting thread for the ball float.

Specifications:
Working Pressure 0.2 - 6bar
Thread Size ½" (UK)
Thread Material Plastic
Flow Rate (2 Bar) 0.167 L/S

A compact button or handle cable operated flush valve, that can cater for both 11/2" and 2" outlet sizes. It has fully adjustable dual flush volumes, an adjustable internal overflow and an easy to fit uni-button allowing quick access to a cistern for maintenance purposes.

Supplied with Lever & Button
Dual Flush
Universal Button Fits all 40mm, 50mm & 60mm Holes
Supplied with Universal Cradles
Adjustable Flushing Volumes
Internal Adjustable Overflow

Specifications:
Flush Rate 2.1 Litres Per Second
Size Universal
Working Temperature 1 - 30°C

A compact cable operated flush valve, that can cater for both 11/2" and 2" outlet sizes. It has fully adjustable dual flush volumes, an adjustable internal overflow and an easy to fit uni-button allowing quick access to a cistern for maintenance purposes.

Long Cable
Dual Flush
Supplied with Universal Cradles
Adjustable Flushing Volumes
Internal Adjustable Overflow

Specifications:

Flush Rate 2.1 Litres Per Second
Size Universal
Working Temperature 1 - 30°C

A compact cable operated flush valve, that can cater for both 11/2" and 2" outlet sizes. It has fully adjustable dual flush volumes, an adjustable internal overflow and an easy to fit uni-button allowing quick access to a cistern for maintenance purposes.

Dual Flush
Universal Button Fits all 40mm, 50mm & 60mm Holes
Supplied with Universal Cradles
Adjustable Flushing Volumes
Internal Adjustable Overflow

Specifications:

Flush Rate 2.1 Litres Per Second
Size Universal
Working Temperature 1 - 30°C

This traditional toilet syphon easily adjusts from 7.5" - 9.5” in height to allow it to fit in most toilets. Its internal overflow means you don’t need to worry about your bathroom flooding, and the dual flush function and multiple flushing volumes gives you greater control over your water. With this syphon servicing is a breeze, simply unclip the side clip and remove the syphon.

Easy to Service
Adjustable Height from 7.5" - 9.5”
Dual Flush
Multiple Full Flush Volumes
Internal Overflow

Specifications
Size 1 1/2"
Working Temperature 1 - 48°C

This traditional toilet syphon easily adjusts from 7.5" - 9.5” in height to allow it to fit in most toilets. Its internal overflow means you don’t need to worry about your bathroom flooding, and the dual flush function and multiple flushing volumes gives you greater control over your water.

Adjustable Height from 7.5" - 9.5”
Dual Flush
Multiple Full Flush Volumes
Internal Overflow

Specifications:
Size 1 1/2"
Working Temperature 1 - 48°C

A revolutionary dual entry toilet fill valve that can easily switch between a bottom or side entry valve. No need to worry about those tight spaces either as the float can rotate 180 degrees. It's also kitted out with a delayed fill, lowering water bills and keeping your cistern eco-friendly.

Bottom or Side Entry
Supplied with 1/2" (UK) & 3/8" (Euro) Threads
Water Saving Delayed Fill
180 Degree Rotation Float
Telescopic
Quiet Fill
Supplied With Double Check Filter

Specifications
Height Adjustable 9" - 14"
Working Pressure 0.25 - 16bar
Thread Size ½" (UK) & ⅜" (Euro)
Thread Material Plastic
Flow Rate (2 Bar) 0.153 L/S

A revolutionary dual entry toilet fill valve that can easily switch between a bottom or side entry valve. No need to worry about those tight spaces either as the float can rotate 180 degrees. It's also kitted out with a delayed fill, lowering water bills and keeping your cistern eco-friendly.

Bottom or Side Entry
Supplied with 1/2" (UK) & 3/8" (Euro) Threads
Water Saving Delayed Fill
180 Degree Rotation Float
Telescopic
Quiet Fill
Heavy Duty Brass Threads
Supplied With Double Check Filter

Specifications:

Height Adjustable 9" - 14"
Working Pressure 0.25 - 16bar
Thread Size ½" (UK) & ⅜" (Euro)
Thread Material Brass
Flow Rate (2 Bar) 0.157 L/S

The Skylo side entry fill valve is small and compact, allowing it to fit in a variety of different cistern sizes. It has a delayed fill and a rotating float protected by a float shield meaning it can squeeze into the tightest cisterns.

Compact
180 Degree Rotation Float
Water Saving Delayed Fill
Quiet Fill
Heavy Duty Brass Threads
Supplied With Double Check Filter

Specifications:

Working Pressure 0.3 - 16bar
Thread Size ½" (UK)
Flow Rate (2 Bar) 0.178 L/S
Thread Material Brass

Directly connects a tank to a mains supply simply and securely
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a maximum wall thickness of 4mm.

Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for cold water use only

Directly connects a tank to a mains supply simply and securely
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a maximum wall thickness of 4mm.

Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for cold water use only

Creates a rigid connection and enhanced dual action seal when fitting a Speedfit pipe to a Speedfit fitting
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting.

JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal.
Features and benefits
• 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only)
• Maintains structural integrity of the pipe connection
• Helps make the pipe more rigid when a side load is applied
• Suitable for hot and cold water and central heating systems
• Suitable for Speedfit pipes and fittings only

Creates a rigid connection and enhanced dual action seal when fitting a Speedfit pipe to a Speedfit fitting
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting.

JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal.
Features and benefits

• 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only)
• Maintains structural integrity of the pipe connection
• Helps make the pipe more rigid when a side load is applied
• Suitable for hot and cold water and central heating systems
• Suitable for Speedfit pipes and fittings only

Creates a rigid connection and enhanced dual action seal when fitting a Speedfit pipe to a Speedfit fitting
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting.

JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal.
Features and benefits

• 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only)
• Maintains structural integrity of the pipe connection
• Helps make the pipe more rigid when a side load is applied
• Suitable for hot and cold water and central heating systems
• Suitable for Speedfit pipes and fittings only

Easily connects to a tap or syphon connection (washer included)
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.

Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Easily connects to a tap or syphon connection (washer included)
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Easily connects to a tap or syphon connection (washer included)
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.

The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Twist & Lock® cap secures fitting and adds compression
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Quickly and easily caps off pipework for a temporary or permanent installation
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.

The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Quickly and easily caps off pipework for a temporary or permanent installation
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.

The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems

Quickly and easily caps off pipework for a temporary or permanent installation
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.

The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Features and benefits

• Instant push-fit connection
• Install and demount in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
• Non-toxic, resists corrosion and no scale build-up
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for hot and cold water and central heating systems