Hand Tools & Accessories

The Faithfull FAITRESTLESP is a pair of plastic trestles which fold flat for easy storage and transportation. The top features flip-up safety pegs to secure the workpiece and rubber inserts to prevent the workpiece slipping. They have non-slip rubber feet. Specifications: Height: 82 cm (32.1/4in). Length: 57 cm (22.1/2in). Width: 3cm (1.1/4in). Maximum recommended capacity: 158kg (348lb) per pair.

This Faithfull heavy steel bodied plumb bob has a pointed end to assist when marking out and is available in two weights. A centre and cross hole fixing system permit a line to be attached through the centre line of the bob helping to provide an accurate centre reading. The plumb bob is a simple to use, essential tool for establishing a vertical or plumb line when carrying out building, decorating and many other projects where an accurate vertical line is required. Weight: 140g (5oz).

These Faithfull heavy-duty 50mm wide ratchet straps are designed to secure really heavy loads. Manufactured from a 50mm wide triple layer Terylene webbing they are weatherproof, cut and abrasion resistant. The ratchet and J-style fixing hooks ensure that loads are secured quickly and efficiently and provide ease of use. Both the 5 and 8 metre lengths have a breaking strain of 4,000kg/daN and a working load of 2000kg/daN. Pack quantity: 1. Manufactured in accordance to EN12195-2. NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT. The Faithfull FAITDTRUCK52 has the following specifications: Length: 5m Width: 50mm Breaking strain: 4,000kg/daN Maximum working load: 2000kg/daN

These Faithfull Ratchet Tie-Downs are manufactured from a 25mm wide triple layer Terylene webbing which is weatherproof, cut and abrasion resistant. The ratchet and S-style hooks ensure that loads are secured quickly and efficiently and provide ease of use. Manufactured in accordance to EN12195-2. Specification: Length: 5m Width: 25mm Breaking Strain: 600kg/daN Maximum Working Load: 300kg/daN NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT Pack quantity: 4.

Manufactured from hard silicon carbide abrasive, rubbing bricks are used for heavy-duty applications such as rubbing floors, cleaning and scouring castings, rubbing down concrete, and removing mould marks. Available in a plain or fluted version. Most commonly used to clean or dress floor tiles and concrete floors. Type: Fluted Size: 200 x 50 x 50mm (8 x 2 x 2in)

Manufactured using silicon carbide abrasive and ideal for sharpening scythes and other agricultural edge tools. Each stone is symmetrical. They are unaffected by climate conditions and designed to cut fast and clean. Use Dry. Round Tapered 305mm (12 in)