BG Electrical

This trailing edge double dimmer switch from British General allows you to control your light levels and set the mood. The intelligent electronic circuit monitors the connected load and provides a soft-start with protection against thermal, current and voltage overload, and is suitable for dimming LED, dimmable CFL's and traditional lighting. Designed with captive screws for ease of installation, the sleek and slim design has a brushed steel finish with anti-fingerprint lacquer, colour match fixing screws and softly rounded edges for a luxurious appearance.

200W Rated (100W LED)

Easy to install supplied with fixing screws and installation instructions

Adjust your light level for mood setting as well as energy saving with 2 way on/off

Trailing (lagging) edge dimmer suitable for dimming LED, dimmable CFL's and traditional lighting

Soft start brings the lights to a set level in around 1 second and extends the life of lamps

Overload protection prevents failure if you mistakenly connect your dimmer to too many lights or transformers and will turn the lights down or off until the load is corrected

Silent operation - no noise when dimming

Support for lower wattage lamps eliminates flicker

Rotary dimmer control with push on/off function

Certified to BS EN 60669-2-1

This trailing edge single dimmer switch from British General allows you to control your light levels and set the mood. The intelligent electronic circuit monitors the connected load and provides a soft-start with protection against thermal, current and voltage overload, and is suitable for dimming LED, dimmable CFL's and traditional lighting. Designed with captive screws for ease of installation, the sleek and slim design has a brushed steel finish with anti-fingerprint lacquer, colour match fixing screws and softly rounded edges for a luxurious appearance.

200W Rated (100W LED)

Easy to install supplied with fixing screws and installation instructions

Adjust your light level for mood setting as well as energy saving with 2 way on/off

Trailing (lagging) edge dimmer suitable for dimming LED, dimmable CFL's and traditional lighting

Soft start brings the lights to a set level in around 1 second and extends the life of lamps

Overload protection prevents failure if you mistakenly connect your dimmer to too many lights or transformers and will turn the lights down or off until the load is corrected

Silent operation - no noise when dimming

Support for lower wattage lamps eliminates flicker

Rotary dimmer control with push on/off function

Certified to BS EN 60669-2-1

This brushed steel finish 20A 16AX triple light switch from British General can operate 3 different lights whilst the 2 way switching allows a second switch to be added to the circuit to operate the same light from another location (e.g. at the top and bottom of the stairs). This switch has an anti-fingerprint lacquer and a sleek and slim profile, with softly rounded edges to add a touch of luxury to your decor.

20A 16AX Rated

Easy to install, supplied with fixing screws and installation instructions

2 way switching allows for a second switch position in a circuit

Captive, backed out terminal screws for fast installation and to prevent screw loss

Sleek and slim premium metal with softly rounded edges

No visible plastic around switches

Moisture control gasket, prevents tarnishing from new plaster

Minimum mounting box depth 25mm

Anti-fingerprint lacquer reduces unsightly fingerprints

Certified to BS60669-1

This brushed steel finish 20A 16AX double light switch from British General can operate 2 different lights whilst the 2 way switching allows a second switch to be added to the circuit to operate the same light from another location (e.g. at the top and bottom of the stairs). This switch has an anti-fingerprint lacquer and a sleek and slim profile, with softly rounded edges to add a touch of luxury to your decor.

20A 16AX Rated

Easy to install, supplied with fixing screws and installation instructions

2 way switching allows for a second switch position in a circuit

Captive, backed out terminal screws for fast installation and to prevent screw loss

Sleek and slim premium metal with softly rounded edges

No visible plastic around switches

Moisture control gasket, prevents tarnishing from new plaster

Minimum mounting box depth 16mm

Certified to BS60669-1

Anti-fingerprint lacquer reduces unsightly fingerprints

This brushed steel finish 20A 16AX single light switch from British General will operate one light in a room. The 2 way switching allows a second switch to be added to the circuit to operate the same light from another location (e.g. at the top and bottom of the stairs). This switch has an anti-fingerprint lacquer and a sleek and slim profile with softly rounded edges to add a touch of luxury to your decor.

20A 16AX Rated

Easy to install, supplied with fixing screws and installation instructions

2 way switching allows for a second switch position in a circuit

Captive, backed out terminal screws for fast installation and to prevent screw loss

Sleek and slim premium metal with softly rounded edges

No visible plastic around switch

Moisture control gasket, prevents tarnishing from new plaster

Minimum mounting box depth 16mm

Certified to BS60669-1

This brushed steel finish 13A double switched socket from British General has a sleek and slim profile with softly rounded edges, anti-fingerprint lacquer and no visible plastic around the switches for a luxurious finish. This socket has been designed with angled in line colour coded terminals and backed out captive screws for ease of installation, and fits a 25mm back box making it an ideal retro-fit replacement for existing sockets.

13A Rated

Easy to install, supplied with fixing screws and installation instructions

Angled, colour coded in-line terminals provide easy access for quick installation

Twin earth fitted as standard for high integrity circuits

Captive screws prevent screw loss

Sleek and slim premium metal with softly rounded edges

No visible plastic around switch

Moisture control gasket, prevents tarnishing from new plaster

Minimum mounting box depth 25mm

Grey insert