BG Electrical

This easy to install outdoor power kit is IP66 Rated and ideal for temporary installations. Designed to protect against water and dust ingress in the most arduous of conditions, Outdoor sockets are an ideal option for managing outdoor or garden appliances, providing protection from the impact of water and dust. This kit includes a pre-wired double 13A socket and easy to wire RCD plug.

Weather and dust protection - IP66 (with cover closed)

Fast fix - no separate screws, no screw covers, 150º rotation

For temporary installation only

3m cable with prepared wires to plug

Pre-wired 13A switched socket

Easy to wire RCD plug, non-latching, 30mA trip current, 40ms trip

Patented cable entry - prevents accidental opening

Double pole switching for the peace of mind of a safer installation

Large open/closer paddles for easier operation

Multiple knockouts for versatility when installing - 8 x 20mm

This trailing edge double dimmer switch from British General allows you to control your light levels and set the mood. The intelligent electronic circuit monitors the connected load and provides a soft-start with protection against thermal, current and voltage overload, and is suitable for dimming LED, dimmable CFL's and traditional lighting. Designed with captive screws for ease of installation, the sleek and slim design has a brushed steel finish with anti-fingerprint lacquer, colour match fixing screws and softly rounded edges for a luxurious appearance.

200W Rated (100W LED)

Easy to install supplied with fixing screws and installation instructions

Adjust your light level for mood setting as well as energy saving with 2 way on/off

Trailing (lagging) edge dimmer suitable for dimming LED, dimmable CFL's and traditional lighting

Soft start brings the lights to a set level in around 1 second and extends the life of lamps

Overload protection prevents failure if you mistakenly connect your dimmer to too many lights or transformers and will turn the lights down or off until the load is corrected

Silent operation - no noise when dimming

Support for lower wattage lamps eliminates flicker

Rotary dimmer control with push on/off function

Certified to BS EN 60669-2-1

This 13A double power socket from British General comes with two USB charging ports, allowing you to plug in an electrical device and charge mobile devices simultaneously without having to sacrifice a power socket. The Nexus Metal range has a sleek and slim profile with softly rounded edges and a polished chrome finish to add a touch of luxury to your decor.

13A Rated

Easy to install supplied with fixing screws and installation instructions

Free your sockets and charge all your devices - Ideal for mobile phone tablets, MP3's and other USB chargeable devices

3.1A USB charging output with charge shared across two outlets. 2 Type A outlets, 3.1A, 5V

Smart USB - Standby mode when device is fully charged; AutoDetect's the USB device and adjusts charging pattern to suite; protective overload function

Angled colour coded terminals for easy identification and captive screws to prevent screw loss

Sleek and slim premium metal with softly rounded edges

Moisture control gasket prevents tarnishing from new plaster

Minimum mounting box depth 25mm

Certified to BS 5733 and BS EN 60930

This dual voltage shaver socket from British General is suitable for use with 240V and 115V shavers and electric toothbrushes. The socket has a brushed steel finish with anti-fingerprint lacquer and a sleek and slim profile with softly rounded edges to add a touch of luxury to your decor.

Dual volt 115 / 240 V

Easy to install, supplied with fixing screws and installation instructions

Suitable for shavers and electric toothbrushes

Captive screws prevent screw loss

Sleek and slim premium metal with softly rounded edges

Sleek and slim premium metal with softly rounded edges

Grey insert

Minimum mounting box depth 47mm

Certified to BS EN 61558-1 and BS EN 61558-2-5

This dual voltage shaver socket from British General is suitable for use with 240V and 115V shavers and electric toothbrushes. \nThe socket has a polished chrome finish and a sleek and slim profile with softly rounded edges to add a touch of luxury to your decor.

Dual volt 115 / 240 V

Easy to install, supplied with fixing screws and installation instructions

Suitable for shavers and electric toothbrushes

Captive screws prevent screw loss

Sleek and slim premium metal with softly rounded edges

Sleek and slim premium metal with softly rounded edges

White insert

Minimum mounting box depth 47mm

Certified to BS EN 61558-1 and BS EN 61558-2-5

This 13A double power socket from British General comes with two USB charging ports allowing you to plug in an electrical device and charge mobile devices simultaneously without having to sacrifice a power socket. The Nexus Metal range has a sleek and slim profile with softly rounded edges and a black nickel finish to add a touch of luxury to your decor.

13A Rated

Easy to install supplied with fixing screws and installation instructions

Free your sockets and charge all your devices - Ideal for mobile phone tablets, MP3's and other USB chargeable devices

3.1A USB charging output with charge shared across two outlets. 2 Type A outlets, 3.1A, 5V

Smart USB - Standby mode when device is fully charged; AutoDetect's the USB device and adjusts charging pattern to suite; protective overload function

Angled colour coded terminals for easy identification and captive screws to prevent screw loss

Sleek and slim premium metal with softly rounded edges

Moisture control gasket prevents tarnishing from new plaster

Minimum mounting box depth 25mm

Certified to BS 5733 and BS EN 60930

This Nexus 800 series white moulded dual voltage shaver socket from British General is suitable for use with 240V and 115V shavers and electric toothbrushes.\nIts moulded white front-plate has a high resistance to fading discolouration and scratches, with inherent anti-microbial properties proven to reduce bacterial development and inhibit the growth of infectious diseases.\nDesigned with captive screws for ease of installation, and finished with softly rounded edges and screw caps for a sleek appearance.

This trailing edge single dimmer switch from British General allows you to control your light levels and set the mood. The intelligent electronic circuit monitors the connected load and provides a soft-start with protection against thermal, current and voltage overload, and is suitable for dimming LED, dimmable CFL's and traditional lighting. Designed with captive screws for ease of installation, the sleek and slim design has a polished chrome finish with colour match fixing screws and softly rounded edges for a luxurious appearance.

200W Rated (100W LED)

Easy to install supplied with fixing screws and installation instructions

Adjust your light level for mood setting as well as energy saving with 2 way on/off

Trailing (lagging) edge dimmer suitable for dimming LED, dimmable CFL's and traditional lighting

Soft start brings the lights to a set level in around 1 second and extends the life of lamps

Overload protection prevents failure if you mistakenly connect your dimmer to too many lights or transformers and will turn the lights down or off until the load is corrected

Silent operation - no noise when dimming

Support for lower wattage lamps eliminates flicker

Rotary dimmer control with push on/off function

Certified to BS EN 60669-2-1

This 13A double power socket from British General comes with two USB charging ports, allowing you to plug in an electrical device and charge mobile devices simultaneously without having to sacrifice a power socket. The Nexus Metal range has a sleek and slim profile with softly rounded edges and a brushed steel finish with anti-fingerprint lacquer to add a touch of luxury to your decor.

13A Rated

Easy to install supplied with fixing screws and installation instructions

Free your sockets and charge all your devices - Ideal for mobile phone tablets, MP3's and other USB chargeable devices

3.1A USB charging output with charge shared across two outlets. 2 Type A outlets, 3.1A, 5V

Smart USB - Standby mode when device is fully charged; AutoDetect's the USB device and adjusts charging pattern to suite; protective overload function

Angled colour coded terminals for easy identification and captive screws to prevent screw loss

Sleek and slim premium metal with softly rounded edges

Moisture control gasket prevents tarnishing from new plaster

Minimum mounting box depth 25mm

Certified to BS 5733 and BS EN 60930