BG Electrical

This high quality enclosed batten holder from British General is T2 rated and supplied with heat resistant wire and is suitable use with for B22 Bayonet cap light bulbs. The wiring aperture in the base has an extra knockout for ease of wiring, and incorporates L, N and Loop-in terminals with 8 individual cable entries and captive screws. The base can be removed without removing the HO skirt, and has alternative fixing holes for off centre mounting and ease of installation. The HO skirt is ideal for use in bathrooms and other rooms where moisture is present as it prevents the metal cap of the lamp being touched in damp situations.

Easy to install, supplied with fixing screws and installation instructions

Wiring aperture in base with extra knockout for ease of wiring

Base incorporates L, N and Loop-in terminals with 8 individual cable entries

large capacity Earth terminal with locking terminal screw.

Wired with heat resistant wire

Base cover can be removed without removing HO skirt

Captive screws prevent screw loss

3 Terminal, T2 rated

HO skirt ideal for use in damp rooms such as bathrooms and kitchens as it prevents the metal cap of the lamp being touched in damp situations

For B22 bayonet cap lamps

This 900 series white moulded dual surface mounting box from British General is ideal for installing 2 single electrical outlets without the need to remove material from the wall. This box has classic square edges multiple knockouts for versatility, and an earth terminal fitted as standard. Ideal for use with electrical accessories from the BG 900 series range.

37mm Deep

Easy to install supplied with fixing screws and installation instructions

Rectangular pattress box for 2 electrical outlets

Multiple knock-outs

Earth terminal fitted as standard

Anti-microbial certified - inhibits 99% of bacterial growth on touch point surfaces from infectious diseases including MRSA, E-Coli, Salmonella and Klebsiella Pneumonia bacteria

Certified to BS 5733

ASTA Licence number 1020

This high quality batten holder from British General offers durability reliability and ease of installation. With a white satin finish backplate and skirt mouldings, this 3 terminal T2 rated lamp holder for B22 bayonet cap light bulbs has knock-outs around the circumference to allow for surface wiring. Supplied with a short skirt to hold a lampshade in place.

Easy to install, supplied with fixing screws and installation instructions

Knock outs to allow for surface wiring

3 Terminal, T2 rated

Captive screws prevent screw loss

For B22 bayonet cap lamps

This Nexus 800 series white moulded 13A double switched socket from British General is double pole for additional safety and has a high resistance to fading, discolouration and scratches, with inherent anti-microbial properties proven to reduce bacterial development and inhibit the growth of infectious diseases. Designed with angled in-line terminals and captive screws for ease of installation, and finished with softly rounded edges and screw caps for a sleek appearance.

13A Rated

Easy to install, supplied with fixing screws and installation instructions

Angled in-line terminals with captive screws provide easy access for quick installation

Screw covers for sleek appearance

Twin earth fitted as standard to allow a double earth facility for installations requiring high integrity protective connection Ref. BS 7671:2008

Double pole switching for the peace of mind of a safer installation

Minimum mounting box depth 25mm

Manufactured using high grade thermoset Urea which effectively inhibits the growth of infectious diseases, including MRSA, E-Coli, Salmonella and Klebsiella Pneumonia bacteria

Certified to BS1363-2

ASTA Licence number 1013

This dual steel back box is ideal for the installation of electrical accessories and is designed to fit two single accessories side by side and to be fitted into a wall cavity for a flush to wall fitting. The 35mm depth is ideal for use with fused connection units and other accessories that require a slightly deeper back box.

Easy to fit

Manufactured from steel

Suitable for installation of 2 x single electrical accessories side by side

4 fixing lugs

M20 knockouts in sides and base

Complete with earth bond terminal

35mm deep

This 900 series white moulded 25A flex outlet plate from British General has cable entry at the lower edge with removable reducer and reversible cord-grip. Ideal for wiring fixed appliances such as fridges and water heaters under a unit or worktop where the isolator is located elsewhere. The outlet plate has a high resistance to fading, discolouration and scratches, with anti-microbial properties proven to reduce bacterial development and inhibit the growth of infectious diseases. Designed captive screws for ease of installation, and finished with classic square edges and screw caps for a sleek appearance.

25A Rated

Easy to install supplied with fixing screws and installation instructions

Suitable for the connection of refrigerators water heaters, central heating and other fixed appliances

cable entry slot at the lower edge of the faceplate

Reversible cord grip and removable reducer to accommodate different flex sizes

Terminals have 2 cable apertures and screws for individual cables for ease of wiring

Screw covers for sleek appearance

Minimum mounting box depth 25mm

Anti-microbial certified - inhibits 99% of bacterial growth on touch point surfaces from infectious diseases including MRSA, E-Coli, Salmonella and Klebsiella Pneumonia bacteria

Certified to BS 5733

This 900 series white moulded 45mm deep surface mounting box from British General is ideal for installing single power points that require extra depth without the need to remove material from the wall. This box has classic square edges, multiple knockouts for versatility, and an earth terminal fitted as standard. Ideal for use with electrical accessories from the BG 900 series range.

45mm Deep

Easy to install supplied with fixing screws and installation instructions

Square pattress box for single outlets

Multiple knock-outs

Earth terminal fitted as standard

Anti-microbial certified - inhibits 99% of bacterial growth on touch point surfaces from infectious diseases including MRSA, E-Coli, Salmonella and Klebsiella Pneumonia bacteria

Certified to BS 5733

ASTA Licence number 1020

This double dry lining box is ideal for mounting electrics into dryline cavity walls partitions and plasterboard walls. The PVC box is 47mm deep, chemical resistant and has a 25mm circular knockout in the base. Quick and easy to install, suitable for everyday use in commercial and industrial environments.

Quick and easy to install

Suitable for mounting electrics into dryline cavity walls, partitions and plasterboard walls

Manufactured from PVC

Chemical resistant

Compatible with double plate accessories

Circular base knockout size = 25mm

Suitable for everyday use in commercial and industrial environments.

Mounting box depth: 47mm

These grey 2.5mm twin and earth cable clips come in a pack of 50pcs, and are ideal for the fast installation of cables. Made from impact resistant UV stabilised polypropylene with integrated hardened zinc coated safety nails, these clips are suitable for use on wood, masonry and compressed board, and can withstand high impact together with extremes of heat, cold and acid.

For fast installations of cables

Suitable for use wood, masonry and compressed board

Grey Colour

Manufactured from strong, impact resistant polypropylene

Each clip includes integrated zinc coated nail

Safety nail bends before breaking

Operating Temperature: -40°C to +80°C