Hand Tools & Accessories

Made From Durable, Natural Fibre (Coco) This Broom Is Ideal For Smooth, Dry Surfaces & Light Debris.

Made From Durable, Natural Fibre This Broom Is Ideal For Rough, Dry, External Surfaces & Heavy Debris

Monument Internal Bending Springs with square section spring steel with a polished finish for internal bending of copper pipes.

The size of the spring corresponds to the inside diameter of tube into which it is to be inserted.

Size: 15mm

Bahco 239 Junior Saw is a wire framed junior hacksaw with an orange lacquered finish.

Fitted with a 32 TPI blade for metal cutting.

Blade length: 150mm (6in).

Made From Durable, Natural Fibre (Coco) This Broom Is Ideal For Smooth, Dry Surfaces & Light Debris.

The Vileda 2-in-1 Dustpan and Brush Set is ideal for quick cleaning tasks. The dustpan features a flexible pan and rubber lip that helps to easily collect dirt on uneven floor surfaces. The brush has black bristles for sweeping hairs and dirt and has firmer, angled red bristles that are ideal for sweeping in corners and along edges.

Plier action roof slate tile cutter with spring loaded handles. This model also has a slate hole punch which operates by closing the handles. Approx length: 300 mm /12in.

Features:

Replaceable blade and punch.

Punch diameter: 3.2 mm (1/8in).

Cutting length: 35 mm per single pressure.

Cutting width: 2.8 mm (0.109in).

Spare jaws to fit all Monument adjustable wrenches.

Monument 350L.

Size small: 28.5mm (1.1/8 in).

Welded steel construction.
250 x 250mm platform.
Rubberised feet provide slip resistance and floor protection.
80mm wide steps for extra comfort.
Powder coated grey for neutral wipe clean protection.
EN131 - 125Kg rating for - DOMESTIC USE ONLY.

The Footprint 620 Line Pins are made from drop-forged, hardened steel with a chrome plated finish. Designed for use when building a wall. Use in conjunction with a length of nylon cord or builder's string to make sure that a course of bricks is straight and true.

Length: 160mm (6.1/4in).

2 x Footprint 620 Line Pins.

Welded steel construction.
250 x 250mm platform.
Rubberised feet provide slip resistance and floor protection.
80mm wide steps for extra comfort.
Powder coated grey for neutral wipe clean protection.
EN131 - 125Kg rating for - DOMESTIC USE ONLY.

IRWIN Jack Hardpoint fleam toothed crosscut handsaw with soft grip for user comfort. The ideal jobbing builders saw.

The Jack Irwin JAK770UHP550 770UHP-550 Hardpoint Soft Grip Handsaw comes with the following specifications:
Blade Length: 550mm (22 inch).
Teeth: 7 TPI

Welded steel construction.
250 x 250mm platform.
Rubberised feet provide slip resistance and floor protection.
80mm wide steps for extra comfort.
Powder coated grey for neutral wipe clean protection.
EN131 - 125Kg rating for - DOMESTIC USE ONLY.

The IRWIN Jack Universal 880 Triple Ground Hardpoint Saw is fitted with a high-quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster-cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing 4X the added protection than conventional anti-rust agents.

The handle is a proven design, light and strong with an ultrasonic welded soft grip for increased hold and enhanced comfort. 90° and 45° angles integrated in the handle aid the user when marking out.

The Irwin Jack JAK880UN20 880 UN Universal Panel Saw comes with the following specification:

Length: 500mm (20in)
Teeth: 8 TPI

The IRWIN Jack Universal 880 Triple Ground Hardpoint Saw is fitted with a high-quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster-cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing 4X the added protection than conventional anti-rust agents.

The handle is a proven design, light and strong with an ultrasonic welded soft grip for increased hold and enhanced comfort. 90° and 45° angles integrated in the handle aid the user when marking out.

The Irwin Jack JAK880UN20 880 UN Universal Panel Saw comes with the following specification:

Length: 500mm (20in)
Teeth: 8 TPI

The IRWIN Jack 880UN Universal Toolbox Saw has all the features and benefits of a standard Jack 880, with the convenience of a 14in 'short' blade. The saw is fitted with a high quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing four times the added protection than conventional anti-rust agents.

The handle has integrated 90° and 45° angles to aid the user when marking out.

Blade Length: 350mm (14 inch).
Teeth: 8 TPI.

Monument galvanised steel wire with gripping handle for clearing sink, shower and bath wastes.

Size 6mm x 3.6m (1/4in x 12ft)

Irwin Jack Fine Handsaw with a soft grip for user comfort. The fine toothing gives a superior finish. Ideal for cutting plywood, chipboard and other man-made materials.

The Jack Irwin JAK990UHP550 990UHP-550 Soft Grip Handsaw comes with the following specifications:
Blade Length: 550mm (22 inch).
Teeth: 9 TPI.

The Monument GRIP+ Adjustable Basin Wrenches are ideal for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths.
The teeth on the jaws will grip uneven shapes etc.

The swivelling head allows access where fixed spanners will not operate and the solid steel handle has profiled end to allow attachment of socket and extension for longer reach.

Correct heat treatment of all components ensures a long life.

Made in Britain.

This Faithfull Aluminium Triangular Scale Rule is graduated with six different scales for precision drawing. (1:20, 1:25, 1:50, 1:75, 1:100, and 1:125). The graduations are clear and easy to read.
The unique triangular profile keeps fingers well away from any knife edge when used for cutting or scoring card etc.

Specification:

Length: 300mm (12 in).

Lightweight But Sturdy Aluminium
Conforms To EN131 Safety Standard
Up To 150kg (23.5 Stone) Load

The Faithfull Asphalt Rake has an all steel construction with 16 flat teeth and a long tubular steel handle. Used for spreading and raking asphalt evenly.

The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces.

The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified.

Not for use on stainless steel.

Made in Britain.

The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces.

The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified.

Not for use on stainless steel.

Made in Britain.

Monument MON1722 Autocut Pipe Cutter.

Size: 22mm.

The Faithfull Automatic Centre Punch conveniently fits into a pocket like a pen. Designed to release a punch when the head is depressed, and the strike force is adjustable from 5lb to 30lb by rotating the knurled head. It enables the user to make a wide range of graduated markings from light indents to heavy punching without using a hammer.

Length: 100mm (4in)

The Monument Automatic Pipe Cutter is ideal for cutting copper pipe in confined spaces. A tough ABS housing covers the steel mechanism which takes any of the strain.

The pipe cutter is easy to use, it cuts once the gate of the tool is closed over the pipe, and allows cutting in two directions.

To ensure long life, occasionally dis-assemble the tool and clean away flux residues and other dirt. NOT for use on stainless steel.

Replacement Wheel Number MONW15PC.

Monument Automatic Copper Pipe Cutter.

Size: 15 mm.

The Monument Automatic Pipe Cutter is ideal for cutting copper pipe in confined spaces. A tough ABS housing covers the steel mechanism which takes any of the strain.

The pipe cutter is easy to use, it cuts once the gate of the tool is closed over the pipe, and allows cutting in two directions.

To ensure long life, occasionally dis-assemble the tool and clean away flux residues and other dirt. NOT for use on stainless steel.

Replacement Wheel Number MONW15PC.

Monument Automatic Copper Pipe Cutter.

Size: 22mm.

The Bahco 317 Hacksaw is suitable for all-round use. It has a slim, comfortable frame design to improve access in confined spaces and to allow easier storage. The special grip at the front of the frame provides good support for the guiding hand to ensure superb performance.

The hacksaw frame has an alternative 90° blade mounting for flush cutting. It is supplied complete with a 300mm (12in) 24 TPI reliable and shatterproof Sandflex® bi-metal blade for excellent cutting performance.

Supplied with 3 extra blades FREE.

Specifications:

Frame Length: 432mm.
Blade Length: 300mm (12in).
Weight: 470g.

The Bahco S330 Socket Set contains sockets made from high performance alloy steel. With a Dynamic Drive™ profile to protect the sockets from wear and damage. Supplied in an oil and temperature resistant polypropylene case. Conforms to DIN 3120 / ISO 1174.

Contains:

12 x 3/8in Hex Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 & 22mm.
1 x 3/8in 60 Teeth Quick Release Ratchet.
2 x 3/8in Extension Bars: 75mm (3in) & 150mm (6in).
1 x 3/8in Universal Joint.
1 x 3/8in x 1/4in Bit Holder.

2 x 3/8in Spark Plug Sockets Hex: 16mm (5/8in) & 21mm (13/16in).

1 x 1/4in Spinner Handle, 2-Component Handle.

1 x 1/4in x 1/4in Bit Holder.

3 x 1/4in Slotted Bits: 4, 5.5 & 7mm.
4 x 1/4in Phillips Bits: PH1, PH2, PH3 & PH4.
6 x 1/4in Hex Bits: 3, 4, 5, 6, 7 & 8mm.

The Faithfull Bar Clamp & Spreader is made from heavy-duty ABS plastic with a high-tensile steel bar. Easy-to-use, single handed operation. Cushion gripped jaw pads help to protect the workpiece from damage. Tool-free head release allows the clamp to be quickly turned into a spreader, with a trigger operation to release the force, freeing it for adjustment.

This Faithfull Bar Clamp & Spreader has the following specification:

Clamp Capacity: 150mm (6in)
Spreader Capacity: 330mm (13in)
Clamping Force: 70kg

The Bahco 244+ Barracuda Handsaw is a high-quality general purpose hard point saw suitable for cutting softwood, worktops, chipboard and MDF.

The Super sharp toothing and thicker blade offer faster cutting with improved stability and precision during use and the screwed 2-component handle can be used for approximate 45° and 90° marking guides.

This Bahco 244P-20-U7-HP Barracuda Handsaw has the following specification:

Blade Length: 500mm (20in).
Tooth Pitch: 7 TPI.
Type: Universal hard point.

The Bahco 244+ Barracuda Handsaw is a high-quality general purpose hard point saw suitable for cutting softwood, worktops, chipboard and MDF.

The Super sharp toothing and thicker blade offer faster cutting with improved stability and precision during use and the screwed 2-component handle can be used for approximate 45° and 90° marking guides.

This Bahco 244P-22-U7-HP Barracuda Handsaw has the following specification:

Blade Length: 550mm (22in).
Tooth Pitch: 7 TPI.
Type: Universal hard point.

Faithfull Digging Bar manufactured from high grade heat treated steel bar with a hexagonal shank. It has one diamond point and one bent chisel point (2in). The bent chisel, or slate bar, can be used for breaking rocks or as a lever for moving heavy objects.

Stanley Bevel Edge Chisel Set designed for tradesmen. Ground finished, hardened and tempered alloy steel blade. The blade is lacquered for rust prevention. Fitted with a solid one-piece, impact-resistant, blue polypropylene handle. Supplied in a carry case with a sharpening stone and oil.

Sizes: 6, 12, 18 and 25mm.

Irwin Bi-Metal Trapezoid Knife Blades combine the best of 2 metals electro-welded together. The edge of the blade is made from high-speed steel, which is much harder than standard carbon steel, and has been shown to last up to 3x longer in user trials on plasterboard, drywalling, roofing, insulation, flooring and other heavy-duty materials.

The bulk of the blade is made from spring steel, which can resist pressure applied from the side without snapping. The safest blade to use is generally a sharp one - as it takes less effort to cut, and therefore greater control can be maintained.

This blade stays sharp up to 3 x longer than standard blades. The high-speed steel edge, and heat treated to greater hardness for longer life and edge sharpness.

Fit all standard knives.

Irwin Bi-Metal Trapezoid Knife Blades

Qty: 10

Bahco 80 Series Adjustable Wrench with a phosphated finish and tapered jaws that feature a measurement scale on the fixed jaw. They have a 16° head angle with no protruding shank when fully open and a strong I-section handle with a spring-loaded square section, and a knurled adjusting nut.

Overall length: 100mm (4 1/4 in).
Jaw Capacity: 13mm

The Faithfull Black Pencil Marking Refills for the FAICPLR Automatic Long Reach Pencil. They can be used to easily mark any surface whether it’s wet or dry and if needed the markings can be wiped clean from shiny surfaces with a damp cloth.

Supplied in a sliding storage case to protect the refills from breakage.

Blackedge Carpenter's Pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain.

Available in 3 grades:

Green (hard): for hardwoods, brickwork and plastered walls.
Red (medium): for general carpentry.
Blue (soft): for softwoods and newly felled timber.

Blackedge Carpenter's Pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain.

Available in 3 grades:

Green (hard): for hardwoods, brickwork and plastered walls.
Red (medium): for general carpentry.
Blue (soft): for softwoods and newly felled timber.

Blackedge Carpenter's Pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain.

Available in 3 grades:

Green (hard): for hardwoods, brickwork and plastered walls.
Red (medium): for general carpentry.
Blue (soft): for softwoods and newly felled timber.

Blue Polypropylene Rope is ideal for a number of fastening applications, and is particularly popular for operations in marine environments, thanks to its weather resistant properties

Bacho 10-21 Bowsaw is a lightweight yet heavy-duty bowsaw for all round use. The integrated, ergonomic handle, with its built in hand guard, protects user's knuckles.

A unique mechanism in the handle makes blade changing and tensioning adjustments effortless. The sturdy blade fittings and high blade tension make precision cutting easier than ever before.

51 code represents DRY cutting blade.
23 code represents WET cutting blade.

The Bahco 10-24-51 Bowsaw is supplied with a peg tooth blade, for dry cutting.

Specification

Size: 600mm (24in).

The Faithfull Bradawls are used to make pilot holes for screws in wood. Available in 2 versions - one with a tapered square tip (also known as a birdcage awl) for faster penetration of wood, and one with a traditional chisel tip. Fitted with comfortable soft grip handles.

The FAIBRADCP Bradawl has a chisel tip.

The traditional chisel tip bores a clean hole when used with a push and twist action.

Blade Length: 50mm
Blade Diameter: 3mm

The Faithfull Bradawls are used to make pilot holes for screws in wood. Available in 2 versions - one with a tapered square tip (also known as a birdcage awl) for faster penetration of wood, and one with a traditional chisel tip. Fitted with comfortable soft grip handles.

The FAIBRADSQ Bradawl has a tapered square tip.

Using a push and twist action, the square shape continuously reams the hole instead of pushing and reaming like a chisel tip bradawl.

Blade Length: 50mm
Blade Diameter: 3mm

Faithfull Braided Nylon Chalk Line for use with powdered chalk for marking between two points to give a straight line.

Braided line resists fraying, and is also useful for a plumb line as it does not spin round as conventional twisted cord.

Braided nylon has less stretch than other lines and is also the strongest.

Length: 36m

These Faithfull brass wire scratch brushes are used in situations where there could be a potential fire or explosion hazard.

Brass wire brushes will not cause a spark.

4 Row.

Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge.

The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer.

Manufactured to BS3066. Made in the UK.

Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge.

The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer.

Manufactured to BS3066. Made in the UK.

The Footprint Brick Bolsters are fully drop-forged, making them ideal for heavy-duty use such as cutting bricks and other general building uses.

The bolsters provide extra strength because the handle, blade and head are drop-forged as a whole rather than just forging the blade. The blade is specially hardened and tempered to provide a long-lasting edge.

The bolsters have a domed head which helps to extend the usable life by preventing splintering and mushrooming from continued use. They are fitted with a high-quality hand guard for added safety.

Manufactured to BS 3066.
Made in the UK.

A by-product of coconut harvesting, natural coco brushes are softer when compared to other natural brooms, but still provide good sweeping characteristics. The Faithfull soft coco brooms are for use in dry conditions. These broom heads come complete with a handle and stay.

The Faithfull FAIBRCOCO18H coco broom head comes complete with handle and metal stay with the following dimensions:
450mm (18in)

A by-product of coconut harvesting, natural coco brushes are softer when compared to other natural brooms, but still provide good sweeping characteristics. The Faithfull soft coco brooms are for use in dry conditions. These broom heads come complete with a handle and stay.

The Faithfull FAIBRCOCO18H coco broom head comes complete with handle and metal stay with the following dimensions:
450mm (18in)

This RST bucket trowel has a blade manufactured from carbon steel. This tool is primarily used for mixing or 'gauging' small quantities of plaster, sand & cement. Its rounded corners make cleaning of buckets easy. It is fitted with a soft touch handle.

Size: 180mm (7in).

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull Cable Ties have the following specifications:

Colour: Black.
Length: 150mm.
Width: 3.6mm.
Pack Quantity: 100.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull Cable Ties have the following specifications:

Colour: Black.
Length: 200mm.
Width: 3.6mm.
Pack Quantity: 100.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull FAICT250B Cable Ties have the following specifications:
Colour: Black.
Length: 250mm.
Width: 3.6mm.
Pack quantity: 100.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull Cable Ties have the following specifications:

Colour: Black.
Length: 300mm.
Width: 4.8mm.
Pack Quantity: 100.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull Cable Ties have the following specifications:

Colour: White.
Length: 150mm.
Width: 3.6mm.
Pack Quantity: 100.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull Cable Ties have the following specifications:

Colour: White.
Length: 200mm.
Width: 3.6mm.
Pack Quantity: 100.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull Cable Ties have the following specifications:

Colour: White.
Length: 250mm.
Width: 4.8mm.
Pack Quantity: 100.

These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.

The Faithfull Cable Ties have the following specifications:

Colour: White.
Length: 300mm.
Width: 4.8mm.
Pack Quantity: 100.

The Faithfull TDCAM51 cam buckle tie-downs are widely used in the transport and building industries and for many outdoor leisure activities. They may also be used to secure items in situ. These quick action tie-downs are designed for use when transporting lightweight items and are perfect for use with car roof racks.

Manufactured using a 100% soft polyester webbing and in accordance EN12195-2, these tie downs are extremely hard wearing, durable and robust. Cam buckle straps are efficient and quick to use, the webbing is simply pulled through self-locking cam buckle to the desired tension. Releasing the load is easily achieved by pressing down on the quick release lever at the rear of the buckle to release the tension.

Manufactured in accordance to EN12195-2.

Specification

Length: 5m.
Width: 25mm.
Breaking Strain: 200kg/daN.
Max. Working Load: 100kg/daN.

Faithfull heavy-duty crowbars, manufactured from high-grade heat-treated steel bar. Ideal for levering heavy objects, wrecking work and digging, the pinch point end allows easy penetration when breaking hard ground.

The Faithfull Churn Brush is versatile and hard wearing brush originally designed for the cleaning of milk churns but now used in preparing and cleaning brickwork and masonry.

260mm (10in).

The Faithfull general-purpose Club Hammer with precision ground striking faces specially hardened and heat treated to withstand the most high-impact heavy applications.
Fitted with a fibreglass handle, with a rubber grip.

1 x Faithfull Club Hammer Fibreglass Handled 1.13kg (2.1/2 lb).

The Faithfull general-purpose Club Hammer with precision ground striking faces specially hardened and heat treated to withstand the most high-impact heavy applications.
Fitted with a fibreglass handle, with a rubber grip.

1 x Faithfull Club Hammer Fibreglass Handled 1.81kg (4 lb).

This Footprint Cold Chisel is ideal for use on stone, masonry, brickwork and other similar materials. It has a heavy-duty design and is made from a fully drop-forged single piece of carbon steel. The cutting edge is hardened and ground for a longer life and the domed anti-mushroom head prevents splintering.

Made in Sheffield, Britain.

The Vitrex Combination Spreader has a convenient dual purpose design. With a notched edge for fast adhesive application and a squeegee edge for rapid grouting.

Bahco Coping Saw ideal for cutting curves, slots and intricate shapes in many materials, wood, fibre board, plywood, plastic, laminates, glass fibre.

The blades can be turned through 360º to cut any curve, and can be easily tensioned through the twist action wooden handle.

Length: 165mm (6.1/2in).
Teeth: 14 tpi.

Bahco spare blades for 301 coping saw. Made of hardened and tempered carbon steel. The fine teeth are ideal for wood cutting.

Teeth milled and set 14 tpi.
Length: 165mm
Pack of 5.

These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights.

The malleable iron head is fitted with one hide and one copper face on a polished wooden handle.

(No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)

Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.

Size: 2
Weight 1070g (2.1/2lb).
Diameter 38mm (1.1/2in).

The Monument 358J Deep Box Immersion Spanner has an octagonal box ring at the base of a steel cylinder. The deep box design allows easy access to heaters that are surrounded by insulation or recessed. Supplied with a separate tommy bar.

Faithfull Digging Bar is manufactured from high grade heat treated steel bar with a hexagonal shank. It has a pencil point at one end and a 50mm (2in) flat chisel edge at the other. Used for breaking rock or concrete and for levering heavy objects.

The Monument Drain Auger comes with a hollow spring 1/4in diameter wire cable with a bulbous head for unblocking sinks, urinals, and small drains etc.
The rotating crank handle, with thumbscrew, fits over and locks the cable and can be entered through strainers.
The 3344K drain auger can also be used without the handle as a refill for the MON3313.

Specifications:

Length: 7.5m (25ft) long retractable.
Diameter: 6mm (1/4 in).

Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.

Size 150mm (6 in)

Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers.

Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.

Size 75mm (3 in)

The R.S.T. Drywall Putty Knife with a soft touch handle for increased user comfort. Available with stiff or flexible blades up to 150mm/6in wide.

Flexible blade.

Size: 10.2cm (4 inch).

The R.S.T. Drywall Putty Knife with a soft touch handle for increased user comfort. Available with stiff or flexible blades up to 150mm/6in wide.

Flexible blade.

Size: 15.2cm (6 inch).

The Faithfull DWHAND is a lightweight Hand Sander which is extensively used in the dry walling industry for sanding the joints between plasterboards after they have been filled.
The sander has a comfortable soft-grip handle and features a foam backing pad, and easy clip paper release system ensuring the abrasive paper is securely held in position and also makes changing the paper sheet easy.
The large handle provides a secure grip to help maximise control and efficiency, while the large sanding surface make this product ideal for all flat sanding applications, around the workshop or home and is designed for use with 280mm x 85mm sanding sheets.

Specification:

Size: 223 x 85mm.

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 12mm (1/2in)

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 6mm (1/4in)

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 8mm (5/16in)

The Stanley DYNAGRIP™ Heavy-Duty Hacksaw incorporates an improved grip for both accurate and comfortable sawing. The durable bi-metal frame is designed for extra cutting capacity and to withstand heavy-duty use. Patented quick blade change lever and tensioning device allows adjustment and memory of the tension, which facilitates faster cutting. Blades can be positioned at 90° or 45°.

Max. Blade Tension: 80kg.

Faithfull edging trowels are commonly use to apply a rounded finished edge to concrete and render. The carbon steel blade with one long curved edge is fitted with a full sized soft grip handle for user comfort.

Size: 280 x 120mm (11 x 4.3/4in).

Bahco 332-21-51 ERGO™ Bowsaw is a lightweight, heavy-duty saw with high blade tension for straight cutting. The pointed nose for better access in tight areas, such as roofing and gardening.

Made from high-quality steel and protected from rust and corrosion by a coating of high-impact enamel paint, and has an innovative easy-to-use mechanism that allows for maximum tension and safe handling.

Integrated knuckle protector for protection of the hand

Size: 530mm (21in).

Bahco ERGO™ Handled Engineering Flat File with a tapered shape for easier access into angles and corners. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. Suitable for general work on iron and steel. The surfaces have a double cut and the edge is single cut.


Specification:

Length: 200mm
Cut: Bastard
Width: 20mm
Thickness: 5mm
Teeth per cm: 10